Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LBR2012T1R0M by Taiyo Yuden is an 0805 fixed inductor with 1uH nominal inductance, suitable for power applications. It has a max operating temperature of 105°C and a DC resistance of 0.091 ohm. This general-purpose inductor features dual-ended terminals and is surface mountable.
Median Price
$0.036
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.064
1k+ parts
$0.053
10k+ parts
-
Mouser Electronics
$0.062
$0.051
$0.038
Master Electronics
$0.031
TTI
$0.035
Verical
Chip1Stop
$0.017
Electro Sonic
$0.049
$0.042
Maritex
$0.143
Semi Source
IBS Electronics
$0.044
Bristol Electronics
Chip Stock
ACDS - Activité Composants Distribution Service
Nova Conductors
Cyclops Electronics Ltd
PC Components Company LLC
Prism Electronics
Ampacity Inc.
$0.011
Perfect Parts
Authorized Procurement Solutions
Abacus Technologies
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Allows for easy and convenient installation on PCBs, saving time and effort.
Provides versatility in connecting the inductor in different circuit configurations.
Suitable for high-frequency applications, ensuring optimal performance.
Designed specifically for power-related functions, making it reliable for power supply circuits.
Offers an ideal value for various applications requiring inductors.
Can withstand higher temperatures, increasing the overall durability of the product.
Suitable for applications requiring moderate current handling capabilities.
Low resistance value ensures efficient power transfer and minimal energy loss.
Ferrite core provides high magnetic permeability, making it suitable for various electronic applications.
Fixed Inductors LBR2012T1R0M attributes and parameters. Explore more Fixed Inductors devices from Taiyo Yuden
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LBR2012T1R0M Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SDR0604-100ML
Bourns
Bourns SDR0604-100ML is a surface mount fixed inductor with 10uH nominal inductance, 1.45A max current, and 23MHz self-resonance freq. Ideal for power applications due to its cylindrical shape, dual-ended terminals, and ferrite core material. Operating temp range -40°C to 125°C makes it versatile for various electronic devices.
74438356047
Wuerth Elektronik & Kg
Wurth Elektronik 74438356047 is a shielded SMT inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.9A and operates b/w -40 to 125°C, making it ideal for general purpose use. The inductor features dual-ended terminals, measures 4.1x4.1x2.1mm (LxWxH), and complies with AEC-Q200 standards.
LQM21FN100M80L
Murata Manufacturing
Murata Manufacturing's LQM21FN100M80L is an 0805 chip inductor with 10uH nominal inductance, 0.39 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this shielded SMT inductor operates b/w -55°C to 125°C and has a max rated current of 0.1A.
MLZ2012N100LT000
TDK
MLZ2012N100LT000 by TDK is a 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 20% tolerance. It is a general purpose inductor suitable for various applications requiring a max rated current of 0.5A and operating temperatures ranging from -55 to 125 °C.
XAL1010-103MED
Coilcraft
Coilcraft XAL1010-103MED is a shielded fixed inductor with 10uH nominal inductance, 15.5A max current, and 11MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40°C to 125°C. AEC-Q200 compliant, this SMT inductor is designed for general purpose use.
LQW15AN12NG00D
LQW15AN12NG00D by Murata is a wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 5500 MHz. This SMT inductor features dual-ended terminals and matte tin finish over nickel, making it ideal for general purpose use.
ASPIAIG-S8050-680M-T
Abracon
ASPIAIG-S8050-680M-T by Abracon is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 1.45 A and a max operating temperature of 125 °C.
DRA124-681-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
XFL4015-471MEC
Coilcraft XFL4015-471MEC is a shielded, surface mount inductor with 0.47uH nominal inductance and 11.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 89MHz and operates b/w -40 to 125°C.
SDR0604-220YL
Bourns SDR0604-220YL is a surface mount fixed inductor with 22uH nominal inductance, 1.1A max current, and 125°C max operating temp. Ideal for power applications due to its cylindrical shape, ferrite core material, and general purpose design.
DRA73-1R0-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
1506
Hammond Manufacturing
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): Axial; Shielded: NO; Surface Mount: NO;
CTX100-5-52M-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Shielded: NO; Surface Mount: NO; Terminal Shape: WIRE;
XAL5030-332MEB
Coilcraft XAL5030-332MEB is a shielded, surface mount inductor with 3.3uH nominal inductance and 8.1A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C, featuring a self-resonance frequency of 28MHz.
NRS4018T4R7MDGJ
Taiyo Yuden
NRS4018T4R7MDGJ by Taiyo Yuden is a 4.7uH power inductor with 1.7A max current, ideal for general purpose applications. Featuring a DC resistance of 0.084 ohm and self-resonance frequency of 35MHz, it operates b/w -25°C to 125°C temperature range efficiently in SMT packages.
XFL4020-222MEB
Coilcraft XFL4020-222MEB is a shielded, surface mount power inductor with 2.2uH nominal inductance and 8A max rated current. Ideal for general purpose applications, it operates b/w -40 to 125°C, featuring a compact 4x4mm rectangular package suitable for various electronic devices.
DR125-102-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
XAL6060-153MEC
Coilcraft XAL6060-153MEC is a shielded, surface mount inductor with 15uH nominal inductance and 6A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 11MHz.
PE-0402CD400KTG
Pulse Electronics
PE-0402CD400KTG by Pulse Electronics is a chip inductor with 0.04 uH nominal inductance, 250 MHz test frequency, and 10% tolerance. Ideal for RF applications due to its 2240 MHz self-resonance frequency and dual-ended terminal placement. Suitable for SMT mounting with gold finish terminals.
HCM1103-3R3-R
Eaton Corporation
HCM1103-3R3-R by Eaton Corp is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 9A max current rating. Ideal for power applications, it features dual-ended terminals, powdered iron core material, and operates b/w -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LBR2012T100KV
The Taiyo Yuden LBR2012T100KV is a surface mount fixed inductor with 10uH nominal inductance, 32MHz self-resonance frequency, and -40 to 105°C operating temperature range. Ideal for RF applications, this general purpose inductor has dual-ended terminals and a wraparound shape in a rectangular package.
LBR2012T100K
LBR2012T100K by Taiyo Yuden is an 0805 fixed inductor with a nominal inductance of 10uH. It has a max rated current of 0.15A and operates b/w -40 to 105°C, making it suitable for power applications. With a self-resonance frequency of 32MHz and DCR measured at 30% tolerance, this general purpose inductor is ideal for SMT designs requiring high performance.
LBR2012T100K8
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LBR2012T101K
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LBR2518T101K
LBR2012T4R7M
LBR2012T4R7M by Taiyo Yuden is a surface mount fixed inductor with a nominal inductance of 4.7 uH and max rated current of 0.2 A. It is commonly used as a power inductor due to its high self-resonance frequency of 45 MHz and compact rectangular package size (2mm x 1.25mm).
LBR2012T4R7M8
Taiyo Yuden's LBR2012T4R7M8 is an 0805 SMT fixed inductor with 4.7uH nominal inductance, 0.24 ohm DC resistance, and 45 MHz self-resonance frequency. Ideal for RF applications due to its dual-ended terminal placement and wraparound shape. Operating temperature range from -40°C to 105°C makes it suitable for various general-purpose inductor needs.
LBR2012T4R7MV
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Self Resonance Frequency: 45 MHz;
LBR2518T101M
Taiyo Yuden's LBR2518T101M is a fixed inductor with 100uH nominal inductance, 2.457 ohm DC resistance, and 105°C max operating temp. Ideal for power applications, this SMT component features dual-ended terminals and ferrite core material.
LBR2518T4R7M
LBR2012T100M
LBR2518T100KV
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Test Frequency: 2.52 MHz;
LBR2012T220K
Taiyo Yuden's LBR2012T220K is an 0805 fixed inductor with a nominal inductance of 22uH. It has a max operating temperature of 105°C and DC resistance of 1.3 ohm, making it ideal for power applications requiring a general purpose inductor with high reliability.
LBR2012T470M
LBR2518T100K
LBR2012T101M
LBR2012T2R2M
LBR2518T1R0M
LBR2012T100M8
LBR2012T101M8
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved