Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KRL1632E-M-R082-F-T5 by Susumu is a fixed resistor with a resistance of 0.082 ohm and 1% tolerance. It features a metal foil technology, rated for temperatures b/w -55 to 155 °C, making it suitable for automotive applications meeting AEC-Q200 standards. With a power dissipation of 0.75 W, this surface mount resistor is ideal for compact electronic devices requiring precise resistance values.
Median Price
$0.460
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.194
1k+ parts
$0.123
10k+ parts
$0.100
DigiKey
$0.196
$0.140
$0.107
Newark
$0.165
-
Element14
$0.532
$0.169
$0.106
$0.102
Farnell
$0.572
$0.209
$0.178
Future Electronics
$0.093
Verical
$0.132
Arrow
$0.067
Nova Conductors
$0.108
Chip Stock
NAC Semi
$0.156
Vyrian
Bristol Electronics
$0.375
$0.150
Perfect Parts
Authorized Procurement Solutions
This resistor is rated for a high temperature of 100°C, making it suitable for use in a wide range of applications where heat may be a concern.
Metal foil technology provides high precision and stability in resistance values, ensuring reliable performance in demanding applications.
Surface mount technology allows for easy and secure mounting on PCBs, saving space and providing efficient assembly.
With a tolerance of 1%, this resistor offers accurate and consistent resistance values, essential for precise circuit operation.
The high maximum operating temperature of 155°C ensures stable performance even in harsh operating conditions.
Matte tin terminal finish provides good solderability and corrosion resistance, enhancing the durability and longevity of the resistor.
Fixed Resistors KRL1632E-M-R082-F-T5 attributes and parameters. Explore more Fixed Resistors devices from Susumu
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
KRL1632E-M-R082-F-T5 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.30
SB
8533.21.00.45
As a specialist in thin film technology and resistors, we can turn your ideas into reality. Since our founding in 1964, we have pursued the originality of thin films through research into thin film technology and product development. A corporate culture that dedicates itself to commercialization in the face of difficulties, self-confidence cultivated through repeated basic research, and unique development capabilities enabled by experienced thin-film technology. This is the reason why Susumu is able to acquire a global position and trust. We have the ability to integrate organically while improving each technology. In particular, our thin film deposition technology is backed by our high level of basic research, and there are things that surpass our competitors. Thin film formation technology (plasma reaction method, sputtering, vacuum deposition method, etc.) Fine photo-etching technology (flat/curved surface etching) Microlaser technology (pattern generation, trimming, scribing, etc.) High-density packaging technology (BGA, ultra-small chips, etc.)
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Zetex Plc
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
RK73H1JTTD1002F
Koa Speer Electronics
RK73H1JTTD1002F by Koa Speer Electronics is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
ERJ6GEY0R00V
Panasonic
Panasonic ERJ6GEY0R00V is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. With a rated power dissipation of 0.125W, it operates b/w -55°C to 155°C. This rectangular metal glaze/thick film resistor features wraparound terminals and matte tin finish, ideal for automotive electronics in harsh environments.
CRCW1206100KFKEAC
Vishay Intertechnology's CRCW1206100KFKEAC is a fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.25 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in various electronic circuits due to its metal glaze/thick film technology.
CRCW0805100RFKEA
Vishay Intertechnology's CRCW0805100RFKEA is a SMT fixed resistor with 100 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 150 V.
CRCW060333K0FKEA
Vishay Intertechnology's CRCW060333K0FKEA is a 33000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.1 W. Ideal for surface mount applications in automotive electronics, meeting AEC-Q200 standards.
CR0603-FX-10R0GLF
Bourns
The Bourns CR0603-FX-10R0GLF is a fixed resistor with a resistance of 10 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
SMW310RJT
TE Connectivity
TE Connectivity's SMW310RJT is a 10 ohm fixed wire wound resistor with 5% tolerance and 3W power dissipation. It operates b/w -55 to 275 °C, suitable for surface mount applications in electronics requiring high resistance and temperature stability. The rectangular package measures 10.5mm x 5.5mm x 5mm, making it ideal for compact circuit designs.
HS1002RF
Arcol Uk
FIXED RESISTOR; Resistance: 2 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 1 %; JESD-609 Code: e4; Length (Package): 65.2 mm;
CRCW080547K0FKEAHP
Vishay Intertechnology's CRCW080547K0FKEAHP is a fixed resistor with 47000 ohm resistance, 1% tolerance, and 0.5 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
PCF0805R-18RBT1
Tt Electronics Plc
PCF0805R-18RBT1 by Tt Electronics Plc is a SMT fixed resistor with 18 ohm resistance, 0.1% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 125 °C with a temperature coefficient of 25 ppm/°C.
CRCW040210R0FKEDC
Vishay Intertechnology's CRCW040210R0FKEDC is a 10 ohm SMT fixed resistor with 1% tolerance and 100 ppm/°C temperature coef. Ideal for surface mount applications, it operates b/w -55 to 155 °C, offering a rated power dissipation of 0.063 W.
RC0603JR-07330RL
Yageo's RC0603JR-07330RL is a 330 ohm fixed resistor with 5% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1W and operating voltage of 75V, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits requiring precise resistance values.
RC1206FR-07100RL
Yageo's RC1206FR-07100RL is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
CRCW12060000Z0EAC
Vishay Intertechnology's CRCW12060000Z0EAC is a SMT jumper resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.25 W power dissipation make it ideal for surface mount applications requiring high precision and reliability.
CRG0603F1K0
TE Connectivity's CRG0603F1K0 is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used in surface mount technology for applications requiring precise resistance values in compact electronic devices. Operating temperature range from -55 to 155 °C makes it suitable for various environments.
CRCW0805100KFKEAC
Vishay Intertechnology's CRCW0805100KFKEAC is a fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating voltage of 150 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
SQPW5R22J
TE Connectivity's SQPW5R22J is a 5W fixed resistor with 0.22 ohm resistance, 5% tolerance, and 350V operating voltage. Its wire wound technology and rectangular package make it ideal for through hole mounting applications in various electronic circuits. With a temperature coefficient of 300 ppm/°C, it operates b/w -55 to 250 °C.
RK73H2ATTD10R0F
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
RC0402FR-0730KL
Yageo's RC0402FR-0730KL is a fixed resistor with 30000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0603FR-072.2RL
Yageo's RC0603FR-072.2RL is a 2.2 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1W and operating voltage of 50V, it operates b/w -55°C to 155°C making it ideal for various electronic circuits requiring precise resistance values in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KRL1632E-M-R270-F-T5
Susumu
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .27 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
KRL1632E-C-R270-F-T5
KRL1632E-C-R270-F-T5 by Susumu is a fixed resistor with a resistance of 0.27 ohm and a tolerance of 1%. It has a max operating temperature of 175 °C and is suitable for surface mount applications.
KRL1632E-M-R270-F-T1
KRL11050-C-R005-F-T1
KRL11050-C-R005-F-T1 by Susumu is a METAL FOIL fixed resistor with 0.005 ohm resistance, 1% tolerance, and 5W power dissipation. Ideal for surface mount applications in electronics due to its compact size (11mm x 5mm x 0.5mm) and operating temperature range of -55°C to 170°C.
KRL1220E-M-R100-F-T5
Susumu's KRL1220E-M-R100-F-T5 is a 0805 SMT fixed resistor with 0.1 ohm resistance and 1% tolerance. With a temperature range of -55 to 155 °C, it's ideal for automotive applications due to AEC-Q200 compliance and high power dissipation of 0.5 W.
KRL1632E-C-R270-F-T1
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .27 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 175 Cel; Tolerance: 1 %;
KRL1632E-M-R033-F-T5
KRL1632E-M-R033-F-T5 by Susumu is a fixed resistor with a resistance of 0.033 ohm and a tolerance of 1%. It is designed for surface mount applications and has a max operating temperature of 155 °C. This resistor is commonly used in automotive electronics, telecommunications, and industrial equipment.
KRL1220E-C-R100-F-T1
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 175 Cel; Tolerance: 1 %;
KRL1220E-M-R470-F-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .47 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
KRL1220E-M-R082-F-T5
The Susumu KRL1220E-M-R082-F-T5 is a fixed resistor with 1% tolerance, 0.082 ohm resistance, and 0.5 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and -55 to 155 °C operating temperature range.
KRL1632E-M-R022-F-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .022 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
KRL1220-C-R051-F-T1
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .051 ohm; Rated Power Dissipation (P): .3 W; Maximum Operating Temperature: 170 Cel; Tolerance: 1 %;
KRL1220E-C-R100-F-T5
KRL1220E-M-R390-F-T5
KRL1220E-M-R390-F-T5 by Susumu is a fixed resistor with a resistance of 0.39 ohm and a tolerance of 1%. It is designed for surface mount applications and has a max operating temperature of 155 °C. This resistor is commonly used in automotive electronics, telecommunications, and industrial equipment.
KRL1632E-M-R010-F-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .01 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
KRL1632E-M-R180-F-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .18 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
KRL1632E-M-R330-F-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .33 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
KRL1220E-C-R009-G-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .009 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 175 Cel; Tolerance: 2 %;
KRL1220E-C-R047-F-T5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .047 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 175 Cel; Tolerance: 1 %;
KRL1632E-M-R082-F-T1
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .082 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved