Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TS512IDT by STMicroelectronics is a dual operational amplifier designed for automotive applications. It features a max input offset voltage of 3500 µV, a nominal CMRR of 90 dB, and operates within -40 °C to 125°C. This micropower op-amp supports supply voltages up to ±18 V.
Median Price
$1.240
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.500
100+ parts
$0.885
1k+ parts
$0.711
10k+ parts
$0.638
DigiKey
$1.590
$0.934
$0.837
-
Newark
$1.640
$0.867
$0.531
Rochester
$0.796
$0.661
$0.589
Future Electronics
$0.610
Farnell
$0.781
$0.630
$0.470
Element14
$1.070
$0.802
Digiode
$0.866
Vyrian
$0.870
Cyclops Electronics Ltd
IBS Electronics
$0.393
Anansix
Corphita
$0.821
IDEA Electronic Components Group
$1.112
$1.001
Vigor
$1.180
MKK Technologies
$2.092
DigiPath Technology Company
Aztec Data Supply Inc.
$3.233
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Lixinc
A-Z Elektronik GmbH
Authorized Procurement Solutions
Kepictronics
Continental Prestige Electronics
$1.400
$0.951
Epart123
$0.688
GreenTree Electronics
Metaverse IC Inc.
Parana Technologies
$1.330
Durable plastic/epoxy material ensures reliability and resilience in various operating environments.
A relatively low input offset voltage allows for improved accuracy in signal processing applications.
This low bias current enhances the performance in precision applications, reducing power consumption.
Surface mount technology facilitates automated assembly and enhances design flexibility.
Dual functions provide flexibility and cost-effectiveness in circuit design.
The rectangular shape allows for efficient PCB layout and space utilization.
A high common mode reject ratio indicates excellent ability to reject noise and interference.
Standard supply voltage makes it compatible with a wide range of applications.
Dual power supply capability allows for greater flexibility in circuit applications.
The 8-terminal configuration provides necessary connections for functionality while saving space.
Small outline package facilitates high-density PCB designs.
This minimum slew rate supports fast changing signals, ideal for high-frequency applications.
Allows for higher voltage applications increasing the versatility of the product.
High temperature operating limit enables usage in automotive and industrial environments.
Optimized bias current at 25 °C enhances performance in precision circuit designs.
Frequency compensation supports stable operation across a wide range of frequencies.
High voltage gain ensures strong amplification capability for weak signals.
Wide temperature range makes it suitable for extreme environmental conditions.
Nickel palladium gold finish ensures excellent conductivity and solderability.
Dual terminal positioning enhances layout flexibility in PCB designs.
Low seated height supports compact designs in space-constrained applications.
Narrow width allows for efficient use of PCB space in multi-component layouts.
Micropower operation is ideal for battery-powered devices and portable applications.
Compact length enhances flexibility in modern circuit designs.
Automotive-grade ensures reliability and performance in automotive applications.
Allows for operation with a wide range of negative voltages, increasing design versatility.
High bandwidth supports a range of applications including audio and RF systems.
Bipolar technology provides a good combination of speed and performance for various applications.
Gull wing terminals provide improved mechanical strength and ease of assembly.
Versatile operational amplifier suitable for a variety of analog signal processing tasks.
Low supply current helps in extending battery life for portable devices.
Standard negative supply voltage supports a broad range of design requirements.
Voltage-feedback architecture is commonly used, enhancing design familiarity and reliability.
Tape and reel packing is suitable for automated assembly processes, increasing manufacturing efficiency.
Higher slew rates enable the operational amplifier to handle rapid signal changes effectively.
Standard pitch allows for compatibility with various PCB designs and assembly techniques.
Operational Amplifiers (Op Amps) TS512IDT attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from STMicroelectronics
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
TS512IDT Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - New Material Set for SO8 & SO14 Pkg 18/Nov/2015
PCN Assembly/Origin - SO8 Assy 11-Apr-2022
PCN Packaging - Mult Dev Cover Tape Chg 14/Aug/2019 Box Label Chg 28/Jul/2016
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Jinan Jingheng Electronics
Itt Semiconductor
Daco Semiconductor
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358PWRG4-JF
LM358PWRG4-JF by Texas Instruments is a dual operational amplifier with 9000uV max input offset voltage and 80dB nominal CMRR. Ideal for applications requiring high voltage gain (25k) and low bias current (-0.5uA), it operates at temperatures from 0 to 70°C in commercial grade settings.
INA169NA/3K
The Texas Instruments INA169NA/3K is an operational amplifier with a max input offset voltage of 1000uV, ideal for automotive applications. With a nominal voltage of 5V and micropower feature, it offers a bandwidth of 0.44MHz. Its small outline package makes it suitable for surface mount designs in various electronic systems.
LM741CH
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Negative Supply Voltage (Vsup): -15 V;
LM2904D
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2277U/2K5G4
OPA2277U/2K5G4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 50uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
INA168NA/250G4
Texas Instruments' INA168NA/250G4 Op Amp has a 1000uV Max Input Offset Voltage, 120dB Nominal CMRR, and 800kHz Unity Gain Bandwidth. Ideal for automotive applications due to its low profile design, it operates at -40 to 125°C with a supply voltage of 5V.
OPA2197IDGKR
OPA2197IDGKR by Texas Instruments is a dual operational amplifier with 500uV max input offset voltage and 126dB nominal CMRR. Ideal for automotive applications, it operates b/w -40 to 125°C, has a unity gain bandwidth of 10kHz, and consumes up to 2.6mA max supply current.
TL082CD
TL082CD by Texas Instruments is a dual operational amplifier with low-bias, 20000 uV max input offset voltage, and 86 dB nominal CMRR. Ideal for applications requiring high voltage gain, it operates at ±15 V supplies, offers 3000 kHz unity gain bandwidth, and has a small outline package.
OPA348AIDBVR
OPA348AIDBVR by Texas Instruments is a CMOS Operational Amplifier with low bias current (0.00001 uA), high voltage gain (25100), and micropower feature. Ideal for automotive applications, it operates at -40 to 125 °C with a supply voltage of 3/5V. The small outline package makes it suitable for space-constrained designs.
TL072ID
TL072ID by Texas Instruments is a dual operational amplifier with low-bias and frequency compensation. It offers a max input offset voltage of 8000 uV, min slew rate of 8 V/us, and nominal unity gain bandwidth of 3000 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2134UA/2K5E4
OPA2134UA/2K5E4 by Texas Instruments is a dual operational amplifier with a max input offset voltage of 2000 uV and a max average bias current of 0.0001 uA. It is commonly used in industrial applications that require low-bias amplification and high common mode rejection ratio.
MCP6001T-I/OT-HCM
MCP6001T-I/OT-HCM by Microchip is a CMOS Operational Amplifier with 4500uV Max Input Offset Voltage, 76dB CMRR, and 1000kHz Unity Gain Bandwidth. Ideal for industrial applications requiring low-bias amplification in compact designs due to its micropower consumption and small outline package.
OPA277UAG4
OPA277UAG4 by Texas Instruments is an operational amplifier with a low input offset voltage of 100uV, ideal for precision applications. With a max bias current of 0.004uA and high common mode rejection ratio of 140dB, it ensures accurate signal processing. Its compact package and micropower design make it suitable for industrial temperature environments.
INA240A1DR
Texas Instruments' INA240A1DR is an Operational Amplifier with 25uV Max Input Offset Voltage, 132dB Nominal CMRR, and 400kHz Unity Gain Bandwidth. Ideal for applications requiring precise current sensing in a compact package with Vsup of 5V, -40 to 125°C operating temp range, and low-offset performance.
LM224DTBR2G
LM224DTBR2G by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 5000 uV and a nominal common mode reject ratio of 85 dB. Ideal for applications requiring micropower amplification in small outline packages.
MCP6001T-I/LT
MCP6001T-I/LT by Microchip Tech is a CMOS Op Amp with 4500uV input offset voltage, 76dB CMRR, and 1000kHz unity gain bandwidth. Ideal for industrial applications requiring low bias, it operates from -40 to 85°C with micropower consumption of 0.17mA at 5V supply.
XOPA2210IDGKT
OPERATIONAL AMPLIFIER;
LM324DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: LSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1211IS8#PBF
Analog Devices
TS514AIDT
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
TS514AID
The STMicroelectronics TS514AID is a micropower operational amplifier with 4 functions, offering a nominal common mode reject ratio of 90 dB. With a max supply voltage of ±18 V and operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring low bias current and high slew rate of 0.8 V/μs.
TS514ID
TS512AIYD
TS512IYD
TS514AIYD
TS514IDT
TS512AID-DT
TS512IYDT
TS512AIYDT
TS514
OPERATIONAL AMPLIFIER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
TS514AIN
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
TS512ID
TS514AIYDT
TS512AIN
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TS512IN
TS512AID
TS512AIDT
TS512BIYDT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved