Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TN3015H-6G by STMicroelectronics is a single SCR designed for efficient power control, featuring a max on-state voltage of 1.6 V and peak reverse voltage of 600 V. It supports high currents with a non-repetitive peak of 295 A. Ideal for applications in power electronics and motor control, it operates b/w -40 °C to 150 °C.
Median Price
$1.630
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$1.580
100+ parts
$0.703
1k+ parts
$0.540
10k+ parts
$0.522
Newark
$1.680
$0.689
$0.568
$0.505
DigiKey
$2.000
$0.857
$0.622
$0.490
Mouser Electronics
$0.858
Element14
$2.660
$1.190
$1.040
$0.964
Avnet
-
Arrow
$0.502
$0.476
Rochester
$0.832
$0.691
$0.616
Verical
$0.863
$0.770
Digiode
$0.418
Vyrian
$0.440
TME
$1.690
$0.870
Anansix
Corphita
$0.396
IDEA Electronic Components Group
$2.159
$1.943
MKK Technologies
$4.060
DigiPath Technology Company
Microchip USA
$10.465
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Eastek
Parana Technologies
$2.582
GreenTree Electronics
Low on-state voltage minimizes power loss, enhancing efficiency in applications.
Durable packaging ensures reliability and longevity in various environments.
Low gate trigger current requirement reduces power consumption during operation.
Single configuration allows for simpler circuit design and integration.
High non-repetitive peak current capability provides robust performance under surge conditions.
Surface mount design allows for compact and high-density circuit board layouts.
Rectangular shape aids in efficient space usage on PCBs.
Gull wing terminals ensure easy soldering and stable mechanical connections.
Adequate on-state current handling makes it suitable for various power applications.
High reverse voltage specification ensures reliability in high-voltage applications.
Low leakage current adds to energy efficiency and prevents heat generation.
Two terminals simplify connections and reduce potential points of failure.
Small outline packaging enables use in space-constrained designs.
High operating temperature rating increases applicability in demanding environments.
SCR type provides efficient switching performance, ideal for power control applications.
Wide temperature range ensures functionality in extreme conditions.
Single terminal position allows for straightforward layout and installation.
High RMS on-state current capability supports a range of load requirements.
Low gate trigger voltage ensures efficient control signal requirements.
Anode connection facilitates straightforward integration in typical SCR circuits.
High off-state voltage ensures reliability under reverse voltage conditions.
Fast rate of rise capability improves system response and reduces switching losses.
Low holding current requirement enhances overall circuit efficiency.
Quick turn-off time allows for efficient control of switching applications.
Silicon Controlled Rectifiers (SCR) TN3015H-6G attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from STMicroelectronics
Case Connection:
Nominal Circuit Commutated Turn-off Time:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-30 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum On-state Voltage:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum RMS On-state Current:
Maximum Repetitive Peak Off-state Leakage Current:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TN3015H-6G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Yangzhou Yangjie Electronics
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Renesas Electronics
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Fairchild Semiconductor
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Won-top Electronics
STMicroelectronics
Philips Components
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
TT280N18SOFHPSA1
Infineon Technologies
Infineon's TT280N18SOFHPSA1 is a Silicon Controlled Rectifier with 1.77V max on-state voltage, 150mA max DC gate trigger current, and 9000A non-repetitive peak on-state current. Ideal for applications requiring high power handling capabilities in industrial settings.
MMO175-08IO7
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: ANTI-PARALLEL, 2 ELEMENTS; Case Connection: ISOLATED;
2N1597
Motorola
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
2N5062
SCR; Repetitive Peak Reverse Voltage: 100 V; Maximum DC Gate Trigger Current: .35 mA; JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
X0202MN
X0202MN by STMicroelectronics is a SCR with max. DC Gate Trigger Current of 0.2mA, Non Repetitive Peak On-state Current of 25A, and Repetitive Peak Reverse Voltage of 600V. It is used in applications requiring high current switching capabilities at temperatures ranging from -40 to 125°C.
MCR25DG
Littelfuse
MCR25DG by Littelfuse is a single silicon controlled rectifier (SCR) with a max DC gate trigger current of 30 mA. It has a repetitive peak reverse voltage and off-state voltage of 400 V, making it suitable for applications requiring high voltage control. Its package style is flange mount with three terminals.
C106D1
Digitron Semiconductors
SCR; Surface Mount: NO; Nominal Circuit Commutated Turn-off Time: 40 us; Maximum On-state Voltage: 2.2 V; Repetitive Peak Off-state Voltage: 400 V; JESD-609 Code: e0;
JAN2N2323S
Defense Logistics Agency
JAN2N2323S by Defense Logistics Agency is a SCR with 350mA DC Gate Trigger Current. It has SINGLE configuration, METAL package body, and ROUND shape. Ideal for military applications meeting MIL-19500/276F standard.
MCR8DCMT4G
MCR8DCMT4G by Onsemi is a single SCR with max. on-state current of 8A, trigger voltage of 1V, and non-repetitive peak on-state current of 80A. Ideal for applications requiring high power control in electronic circuits.
P131
Vishay Semiconductors
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: BRIDGE; Case Connection: ISOLATED;
SKKT92/12E
Semikron International
SKKT92/12E by Semikron International is a SERIES CONNECTED SCR with 2000A Non Repetitive Peak On-state Current and 95A Max On-state Current. It is used in applications requiring high power control such as industrial motor drives and power supplies.
MCMA110P1600TA
MCMA110P1600TA by Littelfuse is a Silicon Controlled Rectifier with 200mA DC Gate Trigger Current, 2050A Non Repetitive Peak On-state Current, and 110A Max On-state Current. Ideal for applications requiring high voltage control such as industrial power supplies and motor drives.
2N886
2N886 by Texas Instruments is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 0.02 mA, Non Repetitive Peak On-state Current of 20 A, and Max On-state Current of 0.35 A. It operates b/w -60 to 100 °C and has a Repetitive Peak Off-state Voltage of 60 V. Ideal for applications requiring precise current control in electronic circuits.
SCR; Repetitive Peak Reverse Voltage: 1600 V; Screw Terminals Description: A-K-AK; Maximum On-state Current: 110 A; Maximum Leakage Current: 10 mA; Minimum Operating Temperature: -40 Cel;
2N6504G
The Onsemi 2N6504G is a single SCR with max DC gate trigger current of 30mA and non-repetitive peak on-state current of 250A. It is used in applications requiring high on-state current handling capabilities, such as power control circuits and motor drives.
TD330N16KOFHPSA2
TD330N16KOFHPSA2 by Infineon is a 1600V SCR with 200mA DC Gate Trigger Current and 520A RMS On-state Current. Ideal for high-power applications, it features a single configuration with built-in diode and flange mount package style.
2N690
International Rectifier
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; JEDEC-95 Code: TO-208AA;
X0402NF1AA2
X0402NF1AA2 by STMicroelectronics is a SCR with max DC Gate Trigger Current of 0.2mA, Non Repetitive Peak On-state Current of 33A, and Max RMS On-state Current of 1.35A. It is used in applications requiring high voltage switching such as power supplies and motor control systems.
VS-40TPS12AL-M3
Vishay Intertechnology
SCR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
F1842HD1200
Crydom
The Crydom F1842HD1200 is a single SCR with built-in diode, featuring a max on-state current of 40A and repetitive peak reverse voltage of 1200V. Ideal for applications requiring high power control such as industrial machinery and motor drives.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TN3015H-6G-TR
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
TN3015H-6I
SCR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
TN3015H-6T
TN3050H-12GY-TR
TN3050H-12WY
Silicon Controlled Rectifiers; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
TN3050HP-12L2Y
SCR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved