Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDA7263 by STMicroelectronics is a 2-channel audio amplifier with 12W output power and 10% harmonic distortion. Operating b/w 0-70 °C, it has a gain of 30dB and operates on supply voltage of 10-30V. Ideal for audio applications requiring high-quality amplification in commercial temperature environments.
Median Price
$6.793
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
American Microsemiconductor Inc.
1+ parts
$6.250
100+ parts
-
1k+ parts
10k+ parts
Bristol Electronics
$7.336
$3.448
$3.154
Vyrian
Digiode
Anansix
Resion
ComSIT Distribution GmbH
R&J Components
Lakeland Logistics Inc
Q Components
Electronic Expediters
LIBRA Elektronik GmbH
Donberg Electronics Ltd
Electronics Depot
Cyclops Electronics Ltd
MISTER SPROCKETS
LittleDiode
Fibra_Brandt Electronic GMBH
GES GmbH
IDEA Electronic Components Group
$1.062
$0.956
MKK Technologies
$1.996
DigiPath Technology Company
AZTECH Wire
$2.470
$2.370
$2.320
$2.280
Microchip USA
$3.583
Kepictronics
GreenTree Electronics
A-Z Elektronik GmbH
Corphita
Perfect Parts
Parana Technologies
$1.269
Assy Fe
The use of plastic/epoxy as the package body material makes the amplifier lightweight and durable, ideal for portable or long-term use.
With a low harmonic distortion of 10%, this amplifier ensures high-quality audio output with minimal distortion, providing a clear sound experience.
Having 11 terminals allows for versatile connectivity options, accommodating various audio input and output devices for enhanced flexibility.
The amplifier's 12W nominal output power delivers sufficient audio amplification, making it suitable for powering speakers or headphones with ease.
With a maximum supply voltage of 30V, this amplifier can handle higher power input levels, ensuring consistent performance across different audio setups.
Audio & Video Amplifiers TDA7263 attributes and parameters. Explore more Audio & Video Amplifiers devices from STMicroelectronics
Nominal Bandwidth:
General IC Type:
Gain:
Harmonic Distortion:
JESD-30 Code:
JESD-609 Code:
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
TDA7263 General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Yangzhou Yangjie Electronics
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Protek Devices
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Hy Electronic
Diotec Electronics
TDA2030H
STMicroelectronics
TDA2030H by STMicroelectronics is an audio amplifier IC with 18W output power, 10% harmonic distortion, and 30dB gain. It operates at supply voltages from 6V to 18V and has a bandwidth of 0.015 kHz. Ideal for audio applications requiring high-quality amplification in a compact rectangular package.
TPA3106D1VFPR
TPA3106D1VFPR by Texas Instruments is an audio amplifier IC with 40W output power, 36dB gain, and 102dB noise figure. It operates in industrial temperature range (-40 to 85°C) and supports power supplies of 12/24V. Ideal for audio applications requiring high performance in a compact package.
MAX98365AEWC+T
Analog Devices
Analog Devices' MAX98365AEWC+T is a Class D audio amplifier with 14.7W output power and 21.5dB gain. It operates b/w -40°C to 85°C, suitable for audio applications requiring high efficiency in a compact rectangular package. With surface mount and grid array style, it offers flexibility for various audio and video amplification needs.
TPA3106D1VFP
TPA3106D1VFP by Texas Instruments is an audio amplifier with 40W output power, 36dB gain, and 0.022 kHz bandwidth. It operates at a supply voltage range of 10-26V and temperature range of -40 to 85°C. Ideal for industrial applications requiring high-quality audio amplification in a compact flatpack package.
SSM2305RMZ-REEL7
Analog Devices' SSM2305RMZ-REEL7 is a Class D audio amplifier with 10% harmonic distortion, 2.8W output power, and 18dB gain. It operates b/w -40 to 85°C, suitable for industrial applications requiring small outline amplifiers with a supply voltage range of 2.5V to 5.5V.
SSM2166S-REEL7
Analog Devices' SSM2166S-REEL7 is an audio preamplifier with a gain of 20 dB, operating at temperatures from -40 to 85°C. It has a supply voltage range of 4.5V to 5.5V and a max current draw of 10mA, making it ideal for industrial audio applications requiring precise amplification in compact spaces.
HA3-5020-5Z
Intersil
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TPA3120D2PWP
TPA3120D2PWP by Texas Instruments is a 24-terminal audio amplifier with a power supply of 24V, offering 20W nominal output power and a gain of 36dB. This CMOS technology device operates in industrial temperature range (-40 to 85°C) and is suitable for audio applications requiring high-quality amplification in compact spaces.
TAS5111ADAD
TAS5111ADAD by Texas Instruments is an audio amplifier with 10% harmonic distortion, 93W output power, and 32 terminals. It operates b/w 0-70°C and supports supply voltages of 3-29.5V. Ideal for applications requiring high-quality audio amplification in a compact package.
TDA2822L-D08-T
Unisonic Technologies
TDA2822L-D08-T by Unisonic Technologies is a dual-channel audio amplifier IC with 1.35W output power and 40dB gain. It operates on a supply voltage range of 1.8V to 12V, making it suitable for various audio applications requiring low harmonic distortion (10%) and a nominal bandwidth of 0.02 kHz. The package style is in-line, with a compact size ideal for space-constrained designs.
LM4889MA/NOPB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM1876TF/NOPB
LM1876TF/NOPB by Texas Instruments is a 20W audio amplifier IC with 2 channels and 110dB gain. It operates b/w -20 to 85°C, with 0.009% harmonic distortion and 0.02 kHz bandwidth. Ideal for audio applications requiring high power output in a compact package.
TDA7560H
STMicroelectronics TDA7560H is a Class AB audio amplifier with 4 functions, operating at 14.4V. It has 25 terminals in a rectangular package style for flange mount applications. Utilizes BCDMOS technology with max supply current of 320mA, ideal for audio and video amplification needs.
TDA7293HS
TDA7293HS by STMicroelectronics is a Class AB audio amplifier with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w 0-70°C, requires +-40V power supplies, and has a max supply current of 100mA. Ideal for audio & video applications requiring high-quality amplification in commercial temperature environments.
NJM12904V
NISSHINBO MICRO DEVICES INC
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR;
TDA2003H
Telefunken Microelectronics
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Package Equivalence Code: ZIP5H,.15,.7,67TB;
FMS6406CSX
Fairchild Semiconductor
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD8009JRTZ-R2
AD8009JRTZ-R2 by Analog Devices is a video amplifier with 5 terminals, operating temperature range of 0-70°C, and bandwidth of 845 kHz. It is used in audio/video applications requiring a small outline package with surface mount capability for commercial-grade operations.
LM4991LD/NOPB
LM4991LD/NOPB by Texas Instruments is an audio amplifier with 3W output power, suitable for industrial applications. It operates at temperatures ranging from -40 to 85°C and requires a supply voltage of 2.2-5.5V. With a small outline package style and surface-mount capability, it offers a bandwidth of 0.02 kHz for high-quality audio amplification in compact designs.
TPA751DG4
TPA751DG4 by Texas Instruments is an audio amplifier IC with 0.5% harmonic distortion, 3/5V power supplies, and 0.35W nominal output power. It is a CMOS technology device in a small outline package for industrial applications requiring high-quality audio amplification in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TDA7294V
TDA7294V by STMicroelectronics is a Class AB audio amplifier with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w 0-70°C, suitable for audio applications requiring high power amplification in commercial-grade environments. The IC features a rectangular package style with flange mount and through-hole terminals spaced at 1.27mm pitch.
TDA7266S
TDA7266S by STMicroelectronics is a 2-channel audio amplifier with 5W output power and 26dB gain. It operates b/w 3-18V, has a bandwidth of 0.02 kHz, and low harmonic distortion at 10%. Ideal for audio applications requiring high-quality sound amplification in commercial temperature environments.
TDA7294
TDA7294 by STMicroelectronics is a Class AB audio amplifier with 15 terminals in an inline package. It operates b/w 0-70°C, suitable for commercial use. The rectangular plastic/epoxy body makes it ideal for audio and video amplification applications.
TDA7294HS
TDA7294HS by STMicroelectronics is a Class AB audio amplifier with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w -40°C to +70°C, requires +-35V power supplies, and has a max supply current of 65mA. This rectangular package IC is ideal for audio and video amplification applications.
TDA7294S
TDA7294S by STMicroelectronics is an audio amplifier IC with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w -40 to +70°C and requires +-35V supplies. Ideal for audio applications requiring high power amplification in a compact package.
TDA7293V
TDA7293V by STMicroelectronics is a Class AB audio amplifier with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w 12-50V supplies in commercial temperature range. Ideal for audio & video applications requiring high power amplification in a rectangular flange mount package.
TDA7294H
TDA7294H by STMicroelectronics is a 100W audio amplifier IC with NMOS technology. It features a max supply voltage of 40V and comes in a rectangular package with 15 terminals for flange mount installation. Ideal for high-power audio applications requiring efficient amplification in plastic/epoxy package body material.
TDA7492MV13TR
TDA7492MV13TR by STMicroelectronics is a class D audio amplifier with a power output of 50W. It operates at temperatures ranging from 0 to 70°C and has a max supply voltage of 26V. This amplifier is commonly used in audio and video applications.
TDA7498ETR
CLASS D AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;
TDA7265
TDA7265 by STMicroelectronics is a Class AB audio amplifier with 25W output power and 10% harmonic distortion. It operates b/w -20°C to 85°C, suitable for audio applications requiring high gain and low bandwidth in a flange mount package.
TDA7052A
Philips Semiconductors
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TDA7052AN
CLASS AB AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR;
TDA7266D13TR
CLASS AB AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
TDA7269A
CLASS AB AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Code: ZIP; Package Shape: RECTANGULAR;
TDA7388A
CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 27; Package Code: ZIP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
TDA7492P13TR
TDA7492P13TR by STMicroelectronics is a Class D audio amplifier with 25W output power, 10% harmonic distortion, and 2 channels. It operates b/w 0-70°C, supports supply voltage from 8-26V, and has a small outline package for surface mount applications in audio and video amplifiers.
TDA7297
CLASS AB AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Nominal Output Power: 15 W;
TDA7388
CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Code: SZIP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
TDA7052ATD
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved