Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-100; Terminal Form: WIRE; Maximum Output Voltage-1: 37 V; Operating Temperature (TJ-Max): 150 Cel;
Median Price
$15.814
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$14.028
100+ parts
$11.436
1k+ parts
$7.624
10k+ parts
-
Arrow
$16.540
$13.220
$12.870
Mouser Electronics
$22.070
$15.590
$14.760
DigiKey
$22.920
$15.964
$15.006
Rochester
$12.070
$10.800
$10.160
Verical
$15.088
$13.500
$12.700
American Microsemiconductor Inc.
$11.150
Digiode
$11.571
Nova Conductors
$11.744
TEDSS.com
$12.990
Vyrian
Anansix
Holdelec - ElecDif-Pro
ComSIT Distribution GmbH
Chip Stock
MISTER SPROCKETS
LWI Electronics Inc
Sinequanon
A2Z Electronics, Inc.
Pegasus Components GmbH
Bisco
ECAB
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
Corel Iberica Componentes, S.L.
R&J Components
M&R Communications
Odintec Ltd.
Bristol Electronics
Speed Components Ltd
Component Sense
First Choice Components Inc.
Electronic Expediters
LittleDiode
North Shore Components
Beckwith Electronics
NAC Semi
PAR Electronics
Resion
IDEA Electronic Components Group
$2.990
$2.691
ChromeModa Solutions
$3.755
$3.079
Corohmni
$4.799
DigiPath Technology Company
$5.622
MKK Technologies
Semicontronic
$10.350
$10.091
$10.040
Ampacity Inc.
Corphita
$10.962
Continental Prestige Electronics
$11.509
Netroflash
$11.157
$10.922
Authorized Procurement Solutions
Alle Elektronik GmbH
Futuretech Components
Perfect Parts
Argo Parts USA
Parana Technologies
$3.575
Supply Digital
Kepictronics
Assy Fe
Montclair Electronics, Inc.
Adjustable Regulators - Positive Single Output Standard LM723H attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
LM723H Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-00-120-2606, 5962001202606, 5962-00-493-6621, 5962004936621, 5962-01-017-8018, 5962010178018, 5962-01-139-2848, 5962011392848, 5962-00-197-3361, 5962001973361, 5962-00-161-6985, 5962001616985, 5962-00-584-0623, 5962005840623, 5962-01-010-7443, 5962010107443, 5962-01-063-7326, 5962010637326, 5962-01-244-8247, 5962012448247
NIIN
001202606, 004936621, 010178018, 011392848, 001973361, 001616985, 005840623, 010107443, 010637326, 012448247
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
1552200168
Molex
WIRE AND CABLE;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM358AN
Signetics
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM723H/883
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-5; Terminal Form: WIRE; No. of Outputs: 1; Package Shape: ROUND;
RH117H
Analog Devices
The Analog Devices RH117H is an adjustable positive single output standard regulator with a max output current of 0.5A and operating temperature range from -55 °C to 150°C. It has a max input-output voltage differential of 40V, making it suitable for applications requiring precise voltage regulation in various electronic devices. The surface-mount package style and compact rectangular shape make it ideal for space-constrained designs.
5962-0722901QZA
The Texas Instruments 5962-0722901QZA is an adjustable positive single output standard regulator with a max output voltage of 57V and max current of 0.5A. It operates at temperatures up to 150°C, making it suitable for military applications requiring high performance in harsh environments. The package body material is ceramic with a metal-sealed cofired construction, ensuring durability and reliability in demanding conditions.
LM217LZ-TR
LM217LZ-TR by STMicroelectronics is an adjustable positive single output standard regulator with a max output current of 0.1 A and a max output voltage of 37 V. It operates in temperatures ranging from -40 to 125 °C and has a max input-output voltage differential of 40 V, making it suitable for various applications requiring precise voltage regulation.
NCP5500DTADJRKG
NCP5500DTADJRKG by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 5V and a max load regulation of 1%. Operating temperature ranges from -40 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM317HVKSTEEL/NOPB
LM317HVKSTEEL/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 60V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation up to 1.5A output current.
LT1020CN
Analog Devices' LT1020CN is a bipolar adjustable positive single output standard regulator with 14 terminals in an in-line package. It offers a min output voltage of 4V and max output voltage of 30V, suitable for applications requiring up to 0.125A current output. The PLASTIC/EPOXY package makes it ideal for various electronic devices.
LM723D
LM723D by STMicroelectronics is an adjustable positive voltage regulator with a 2V to 37V output range and a max current of 0.15A. It features a compact rectangular package with gull-wing terminals, ideal for space-constrained applications. This versatile regulator is perfect for power supply designs in various electronic devices.
LM317LILPR
LM317LILPR by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 35V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications. With a max output current of 0.1A and package style in cylindrical shape, it offers precise regulation in compact designs.
LM317MQDCYRG4
LM317MQDCYRG4 by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 0.5 A and a max input-output voltage differential of 40 V. It is commonly used in applications requiring voltage regulation, such as power supplies and battery chargers.
LM317BD2TR4
LM317BD2TR4 by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
IP338K
Tt Electronics Plc
IP338K by Tt Electronics Plc is an adjustable positive single output standard regulator with a max output current of 5A and a max input-output voltage differential of 35V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation. The package style is flange mount with a round shape and pin/peg terminal form, providing ease of installation and reliability in demanding environments.
LM317AMDT
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V;
LM350TG
LM350TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 3A and a max output voltage of 33V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation such as power supplies and battery chargers.
LT3081EFE#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.1 mm; No. of Outputs: 1;
LM117H
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; No. of Functions: 1; Package Body Material: METAL; Qualification Status: Not Qualified;
LM317AMDTX/NOPB
LM317AMDTX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package. With a min input-output voltage differential of 3V and high load regulation accuracy, this bipolar technology-based regulator is ideal for use in electronic devices where stable power supply is crucial.
M38510/11704SYA
Analog Devices' M38510/11704SYA is an adjustable positive single output standard regulator with a max output current of 1.5 A and a max input-output voltage differential of 40 V. This bipolar technology device operates in temperatures ranging from -55 to 150 °C, making it suitable for various applications requiring precise voltage regulation in harsh environments.
LT1020CSW#TRPBF
LT1020CSW#TRPBF by Analog Devices is an adjustable positive single output standard regulator with a max input-output voltage differential of 33.5V, making it suitable for various applications requiring precise voltage regulation. With a max load regulation of 0.4% and a max output current of 0.125A, this bipolar technology-based regulator offers reliable performance in compact electronic devices operating within a temperature range of 0 to 100 °C.
LM723CN
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Seated Height: 5.1 mm; Width: 7.62 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM723CN by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. It has a max output current of 0.15A and can operate at temperatures up to 70°C. This regulator is commonly used in applications requiring adjustable voltage regulation.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Nominal Dropout Voltage-1: 4.85 V; Terminal Position: DUAL;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Maximum Output Current-1: .05 A;
LM723H
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-5; Terminal Form: WIRE; Maximum Input-Output Voltage Differential: 38 V; Moisture Sensitivity Level (MSL): 1;
LM723H by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. Operating temperature ranges from -55°C to 150°C, making it suitable for various applications. With a max output current of 0.15A and adjustable output voltage up to 37V, it is ideal for power supply designs in different electronic devices.
LM723H/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-5; Terminal Form: WIRE; Technology: BIPOLAR; Maximum Output Current-1: .15 A;
LM723H/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. Operating temperature ranges from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.15A and adjustable output voltage up to 37V, this BIPOLAR technology regulator is ideal for power supply designs in industrial and automotive electronics.
LM723CN/NOPB
LM723CN/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. It operates at temperatures ranging from 0 to 70°C and has a max output current of 0.15A. This device, with a package style of in-line, is commonly used in applications requiring precise voltage regulation such as power supplies and battery chargers.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; Package Body Material: PLASTIC/EPOXY;
LM723CH/NOPB
LM723CH/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. Operating temperature ranges from 0 to 70°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.15A and adjustable output voltage up to 37V, this regulator is ideal for electronic devices that demand stable power supply.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-5; Terminal Form: WIRE; Package Body Material: METAL; Technology: BIPOLAR;
LM723CH
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-100; Terminal Form: WIRE; Maximum Output Voltage-1: 37 V; Minimum Input-Output Voltage Differential: 3 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-5; Terminal Form: WIRE; Maximum Time At Peak Reflow Temperature (s): 40; Operating Temperature (TJ-Max): 70 Cel;
LM723CH by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. Operating b/w 0-70°C, it offers a min output voltage of 2V and can handle up to 0.15A output current. Ideal for applications requiring precise voltage regulation in various electronic devices.
LM723J/883
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Output Voltage-1: 37 V; JESD-30 Code: R-GDIP-T14;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Package Equivalence Code: DIP14,.3; Peak Reflow Temperature (C): 260;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 10; Package Code: TO-5; Terminal Form: WIRE; Package Body Material: METAL; Maximum Load Regulation (%): .6 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved