Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LD29150PT15R from STMicroelectronics is a fixed positive LDO regulator with a nominal output of 1.5V and max current of 1.5A, ideal for compact applications. It operates b/w -40 °C to 125 °C, ensuring reliability in diverse environments. With excellent line regulation at just 0.0075%, it’s perfect for sensitive electronics.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
LWI Electronics Inc
IDEA Electronic Components Group
$8.999
$8.099
Microchip USA
$11.313
MKK Technologies
$16.923
DigiPath Technology Company
AZTECH Wire
$19.920
Authorized Procurement Solutions
Parana Technologies
$10.760
Vigor
Corphita
The use of plastic/epoxy provides cost-effectiveness and excellent insulation properties, ensuring durability in various applications.
Surface mount technology allows for compact designs and ease of assembly, making it suitable for modern PCB designs.
A maximum operating temperature of 125 °C indicates robust thermal performance, ensuring reliability in high-temperature environments.
Bipolar technology enables higher performance for low dropout, making it effective for efficiency in voltage regulation.
The rectangular package shape facilitates efficient space utilization on PCB and allows for better thermal management.
Gull wing terminals offer reliable soldering and can accommodate a variety of manufacturing processes, enhancing assembly reliability.
Operating down to -40 °C ensures this product maintains performance in extreme conditions, suitable for automotive and industrial applications.
Tape and reel packing improves handling and automatic insertion in production, promoting efficient manufacturing processes.
A low minimum output voltage allows for compatibility with low-voltage circuit applications, enhancing versatility.
A voltage tolerance of 2% ensures high precision in output voltage, making it reliable for sensitive electronic circuits.
The nominal output voltage of 1.5 V is ideal for powering numerous digital devices while keeping energy consumption low.
Four terminals provide a compact yet effective design, allowing for stable connections and simpler PCB layout.
The small outline package style supports high-density layouts, perfect for miniaturized electronic designs.
A fixed output eliminates the need for external adjustment components, simplifying the design and reducing board space.
A terminal pitch of 1.27 mm allows for a tight packaging configuration, optimizing the use of board space.
Exceptional line regulation ensures output voltage remains stable despite variations in input voltage, critical for reliable performance.
This type of LDO regulator is designed for simple applications requiring a stable voltage output, enhancing ease of use.
Matte tin terminal finish provides reliable solderability and corrosion resistance, ensuring longer component lifespan.
Single terminal position simplifies board layout and assembly, leading to increased manufacturing efficiency.
The slightly higher maximum output voltage capability provides flexibility in handling various load requirements without compromising safety.
A low seated height helps in maintaining a low profile for devices, making them suitable for compact applications.
A narrow width allows for efficient use of space on the PCB, ideal for designs with limited area.
Low load regulation ensures that the output voltage remains consistent even with varying load conditions, which is vital for sensitive circuits.
A minimum input voltage of 3 V allows for compatibility with a wide range of power supplies, adding versatility to the design.
Support for 1.5 A output current signifies the ability to drive moderate loads efficiently, making it suitable for many applications.
A maximum reflow time of 30 seconds helps in achieving optimal solder joint quality during assembly without damaging the device.
Withstanding up to 260 °C during reflow soldering ensures compatibility with lead-free solder processes, meeting modern manufacturing standards.
A nominal dropout voltage of 1.5 V makes this LDO efficient even in low-voltage applications, ensuring minimal energy loss.
The length of 6.5 mm is suitable for compact devices while providing a stable connection, which is essential for reliable performance.
A maximum input voltage of 13 V expands design versatility across various electronic applications while ensuring safety margins.
The absolute maximum input voltage of 30 V provides an added safety buffer against unexpected voltage spikes, protecting the circuit.
Fixed Regulators - Positive Single Output LDO LD29150PT15R attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LD29150PT15R Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Multicomp Pro
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LL4148
Surge Components
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
MIC5219-3.3YM5-TR
Microchip Technology
MIC5219-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, suitable for applications requiring low dropout voltage and precise voltage regulation in the temperature range of -40 to 125°C.
MAX8878EZK28-T
Maxim Integrated
MAX8878EZK28-T by Maxim Integrated is a fixed positive single output LDO regulator with 2.8V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style and operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM2931Z-5.0
Motorola
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Minimum Input Voltage: 6 V;
TPS76833QPWPRG4
Texas Instruments
TPS76833QPWPRG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for efficient mounting on PCBs.
TPS79633DCQR
TPS79633DCQR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It features a small outline package style, operates in temperatures ranging from -40°C to 125°C, and has a max dropout voltage of 0.325V. Ideal for applications requiring stable power supply in compact electronic devices.
LM1086ILD-3.3/NOPB
LM1086ILD-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With its small outline package style and surface mount capability, this regulator is ideal for space-constrained electronic devices where precise voltage control is essential.
MIC5365-1.8YC5-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Moisture Sensitivity Level (MSL): 1;
MIC5205-5.0YM5-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Package Body Material: PLASTIC/EPOXY;
TPS73733DCQR
TPS73733DCQR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS71733DCKR
TPS71733DCKR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.3V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require a stable and regulated power supply, such as consumer electronics and industrial equipment.
LM1086ISX-3.3/NOPB
LM1086ISX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and dropout voltage of 1.3V, ideal for applications requiring stable voltage regulation in a compact package. Operating temperature ranges from -40°C to 125°C, making it suitable for various electronic devices needing reliable power supply solutions. With surface mount capability and small outline package style, it offers flexibility in design while ensuring efficient performance with low line and load regulations.
ADM7172ACPZ-2.5-R7
Analog Devices
ADM7172ACPZ-2.5-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 2A max output current, 2.5V nominal output voltage, and 1.5% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its very thin profile chip carrier package style.
NCP1117ST33T3G
NCP1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
REG1117-3.3/2K5
The Texas Instruments REG1117-3.3/2K5 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly processes.
LT1763CS8-3.3#TRPBF
Analog Devices' LT1763CS8-3.3#TRPBF is a fixed positive single output LDO regulator with a 3.3V nominal output voltage and 0.5A max output current. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
SPX3819M5-L-3-3/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Nominal Output Voltage-1: 3.3 V;
LD39050PU33R
STMicroelectronics
LD39050PU33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 0.5 A. It has a nominal output voltage of 3.3 V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LP2985IM5X-3.3/NOPB
LP2985IM5X-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.15 A and a dropout voltage of 0.28 V. It is commonly used in applications requiring stable voltage regulation, such as portable electronics and battery-powered devices.
MCP1703T-3302E/CBVAO
MCP1703T-3302E/CBVAO by Microchip Technology is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in automotive electronics or industrial equipment.
ADP3338AKCZ-3.3
ADP3338AKCZ-3.3 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LD29150DT33R
LD29150DT33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LD2985BM50R
STMicroelectronics LD2985BM50R is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.15A. It operates in an input voltage range from 2.5V to 16V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
LD29150DT50R
STMicroelectronics LD29150DT50R is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LD2980ABM33TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.5 %;
LD2985BM33R
STMicroelectronics LD2985BM33R is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring low dropout voltage and precise voltage regulation.
LD2981ABU33TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.5 %;
LD2980CM50TR
LD2980CM50TR by STMicroelectronics is a fixed positive single output LDO regulator with a max dropout voltage of 0.225V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LD2980CM33TR
STMicroelectronics LD2980CM33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.05A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LD29150PT50R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LD2980ABM50TR
LD2981CM33TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LD29080DT33R
STMicroelectronics' LD29080DT33R is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs with limited space constraints.
LD2979M30TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;
LD2981ABM50TR
STMicroelectronics LD2981ABM50TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.
LD2981ABU50TR
STMicroelectronics LD2981ABU50TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature range from -40°C to 125°C makes it ideal for various electronic devices.
LD2985BM30R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LD29150DT18R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LD2981ABM33TR
LD29080PT15R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Maximum Output Voltage-1: 1.537 V;
LD29080PT18
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Pitch: 1.27 mm; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved