Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LD1117AV25 by STMicroelectronics is a fixed positive LDO regulator with a nominal output of 2.5 V and a max load current of 1 A. It operates b/w 0 °C to 125°C, featuring a max dropout voltage of 1.3 V. Ideal for powering sensitive electronics in compact designs.
Median Price
$0.890
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.360
1k+ parts
$0.278
10k+ parts
$0.416
Digiode
$0.846
-
Vyrian
Anansix
GES GmbH
ABC Electronics Ltd.
Corphita
$0.801
IDEA Electronic Components Group
$6.843
$6.159
Microchip USA
$7.314
MKK Technologies
$12.868
DigiPath Technology Company
Vigor
Perfect Parts
Parana Technologies
$8.182
The plastic/epoxy material ensures durability and protection against environmental factors, making it suitable for diverse applications.
A low dropout voltage allows for better efficiency when the input voltage is close to the output voltage, ensuring optimal performance in tight voltage conditions.
With a maximum operating temperature of 125 °C, this LDO can be used in high-temperature environments without compromising performance.
The bipolar technology provides high accuracy and stability, making it reliable for sensitive applications that require precise voltage regulation.
The rectangular package shape allows for efficient use of PCB space, facilitating easier integration into compact designs.
Through-hole terminals provide robust mechanical support and make it easy to solder the regulator onto various circuit boards, ensuring reliable connections.
The operational range starting from 0 °C means this LDO can function well in low-temperature environments, broadening its range of applications.
With a minimum output voltage of 2.4 V, it caters to devices that require moderate power supply levels without drop-outs.
The low voltage tolerance ensures that the output remains stable and reliable, minimizing the risk of damage to connected components.
A nominal output voltage of 2.5 V is ideal for many digital circuits, making this LDO versatile for a range of applications.
With three terminals, it simplifies design integration while maintaining functionality and efficiency.
The flange mount style provides additional mounting stability, which is beneficial in high-vibration applications.
The fixed adjustability simplifies the design process as it doesn’t require extra components for voltage setting, reducing overall board complexity.
The common terminal pitch of 2.54 mm ensures compatibility with standard PCBs and simplifies assembly.
Exceptional line regulation guarantees that changes in input voltage have minimal impact on output voltage, ensuring stable performance.
As a fixed positive single output LDO, it is tailored for simple applications requiring regulated voltage without the complexity of adjustments.
A single terminal position is straightforward for layout designs, enhancing ease of integration into various configurations.
The higher output voltage capability up to 2.6 V allows it to interface with a broader range of components while maintaining proper regulation.
High load regulation indicates that the output voltage remains consistent even with varying load currents, crucial for sensitive applications.
The minimum input voltage of 3.9 V provides flexibility in power supply design, accommodating various input sources.
A maximum output current of 1 A makes this LDO ideal for powering a range of devices and circuits, enhancing its application scope.
The nominal dropout voltage of 1.15 V ensures effective performance during operation close to the input/output voltage limits, extending the regulator's efficiency.
Supporting up to 8 V input voltage allows it to be used with a wider selection of power supplies, making it flexible for different systems.
The absolute maximum input voltage of 10 V provides a safety margin against accidental overvoltage conditions, thereby protecting devices.
Fixed Regulators - Positive Single Output LDO LD1117AV25 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from STMicroelectronics
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
LD1117AV25 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Taiwan Semiconductor
Bkc Semiconductors
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TLV70450DBVT
TLV70450DBVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM3480IM3-12/NOPB
LM3480IM3-12/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 12V and max dropout voltage of 1.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in limited footprint designs.
REG1117-3.3/2K5G4
The Texas Instruments REG1117-3.3/2K5G4 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LM2936MX-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LM2937IMP-5.0/NOPB
LM2937IMP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, has a dropout voltage of 1V, and offers excellent line/load regulation for various applications in electronics requiring stable power supply.
LM3480IM3-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM2937ES-3.3
LM2937ES-3.3 by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
LM3480IM3X-3.3/NOPB
LM2937IMP-3.3
LM2937IMP-3.3 by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.5A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
LM3480IM3X-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1.2V max dropout voltage, and 0.1A max output current. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
LT3032EDE#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; Moisture Sensitivity Level (MSL): 1;
LM2936MX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.05A max output current. It operates b/w -40 to 150°C, has a dropout voltage of 0.2V, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM2937IMP-5.0
LM2937IMP-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.5 A and an operating temperature range from -40 to 85°C. It has a nominal output voltage of 5 V, making it suitable for applications requiring stable voltage regulation in compact electronic devices.
LT3032EDE#TRPBF
Analog Devices
Analog Devices' LT3032EDE#TRPBF is a fixed positive single output LDO regulator with a max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in need of stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs requiring efficient heat dissipation.
LM2936MP-3.3/NOPB
LM2936MP-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.05A. It has a small outline package style, operates b/w -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
TPS76350QDBVRQ1
TPS76350QDBVRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
LM2931AD50R
LM2931AD50R by STMicroelectronics is a fixed positive single output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.6V and can handle up to 0.1A output current. Ideal for applications requiring stable voltage regulation in compact spaces.
TPS79333DBVREP
TPS79333DBVREP by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
LT1963AEST-3.3#PBF
Analog Devices' LT1963AEST-3.3#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It features a small outline package style, matte tin terminal finish, and operates within a temperature range of -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
ADP7118ACPZN-5.0-R7
ADP7118ACPZN-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with a max output current of 0.2 A and a dropout voltage of 0.45 V. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LD1117V33C
LD1117V33C by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LD1117V33
LD1117V33 by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.3 A. It features a max dropout voltage of 1.2 V, making it suitable for applications requiring stable voltage regulation in a compact package. With an operating temperature range from 0 to 125°C, this regulator is ideal for various electronic devices where precise power management is essential.
LD1117DT33TR
STMicroelectronics LD1117DT33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It features a small outline package, operates b/w 0-125°C, and has a dropout voltage of 1.1V. Ideal for applications requiring stable voltage regulation in compact designs.
LD1117DT33CTR
STMicroelectronics LD1117DT33CTR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117S50TR
LD1117S50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.2V. It operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117AS33TR
STMicroelectronics LD1117AS33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1A max output current. It has a small outline package style, matte tin terminal finish, and operates b/w 0°C to 125°C. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LD1117DT50TR
LD1117DT50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1.3A. It operates in an input voltage range of 6.5V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
LD1117ADT33TR
LD1117ADT33TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in an input voltage range of 4.75V to 10V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in electronic devices where space is limited.
LD1117S12TR
LD1117S12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LD1117S50CTR
LD1117S50CTR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V, suitable for applications requiring stable 5V output voltage. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices in different environments. The package style is small outline with gull wing terminals, offering compact design and easy surface mount installation.
LD1117V50
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %;
LD1117DT12TR
LD1117DT12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max dropout voltage of 1.2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117DT50CTR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %;
LD1117DT25TR
LD1117D33TR
STMicroelectronics LD1117D33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It features a small outline package, operates b/w 0-125°C, and has a dropout voltage of 1.1V, making it ideal for various applications requiring stable voltage regulation in compact designs.
LD1117DT33C
LD1117DT33C by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117V18
LD1117DT18
LD1117DT18 by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a nominal output voltage of 1.8V. It operates in an input voltage range from 3.3V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, ideal for space-constrained PCB layouts.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved