Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LD1117S50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.2V. It operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Median Price
$0.258
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Newark
1+ parts
$0.412
100+ parts
$0.229
1k+ parts
$0.191
10k+ parts
-
DigiKey
$0.450
$0.241
$0.204
Mouser Electronics
$0.189
Distrelec
$0.634
$0.306
Farnell
$0.183
$0.155
Element14
$0.234
Avnet
Chip1Stop
$0.120
Arrow
Verical
$0.154
EBV Elektronik
Future Electronics
$0.146
RS (Exports)
$0.368
$0.308
$0.294
Maritex
$0.255
$0.130
$0.105
Nova Conductors
$0.262
Digiode
$0.332
TME
$0.380
$0.193
$0.170
$0.158
Bristol Electronics
$0.675
$0.338
$0.135
$0.101
Component Electronics Inc.
$1.540
$1.150
$1.000
ComSIT Distribution GmbH
Chip Stock
Cyclops Electronics Ltd
IBS Electronics
$0.351
Vyrian
ComSIT USA
MISTER SPROCKETS
Dan-Mar Components
Partservice
$0.127
$0.122
Micros sp.j. W. Kędra i J. Lic
$0.136
$0.131
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Micros
LWI Electronics Inc
Anansix
Rebound Electronics
Speed Components Ltd
Flex Direct, LLC
Holdelec - ElecDif-Pro
Inventory MP
Semtec, LLC
Semicontronic
$0.054
$0.053
$0.052
Ampacity Inc.
Argo Parts USA
$0.257
$0.249
Modulus Dynamics
$0.275
Corohmni
Advanced Electronics
$0.283
$0.269
Corphita
$0.315
Vigor
$0.460
Continental Prestige Electronics
$0.625
$0.324
$0.212
IDEA Electronic Components Group
$3.624
$3.261
Aztec Data Supply Inc.
$6.120
MKK Technologies
$6.814
DigiPath Technology Company
Perfect Parts
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Epart123
GreenTree Electronics
Kepictronics
iodParts Technologies Inc.
Robosynatics
Lucentia Tech
$0.270
$0.264
Futuretech Components
S.R.D Solutions
A-Z Elektronik GmbH
Assy Fe
Lixinc
Alle Elektronik GmbH
Cyclops Electronics Ltd (Excess)
Netroflash
$0.244
Parana Technologies
$4.333
Ashlea Components Ltd (Excess)
The plastic/epoxy material used for the package body provides durability and protection for the internal components of the fixed regulator, ensuring a longer lifespan.
With a low maximum dropout voltage of 1.2V, this fixed regulator can provide a stable output voltage even when the input voltage is close to the output voltage, making it suitable for applications with tight voltage requirements.
The high operating temperature of 125°C allows this fixed regulator to function reliably in a wide range of environmental conditions, making it versatile for various applications.
The bipolar technology used in this fixed regulator ensures low noise and high stability in the output voltage, making it ideal for sensitive electronic devices.
The fixed output voltage of 5V provides a consistent power supply for connected components, ensuring reliable operation in the circuit.
With a high maximum output current of 1.3A, this fixed regulator can deliver sufficient power to support multiple components or devices in a circuit.
Fixed Regulators - Positive Single Output LDO LD1117S50TR attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from STMicroelectronics
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LD1117S50TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Back Metal Conversion 21/Jun/2016
PCN Assembly/Origin - New lead-frame 22/Sep/2021
PCN Packaging - Box Label Chg 28/Jul/2016 Mult Dev Carrier Tape Chg 2/Oct/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
National Semiconductor
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM2931ADT50R
LM2931ADT50R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It has a small outline package style, operates b/w -40 to 125°C, and is suitable for applications requiring stable voltage regulation in tight spaces.
LM2937IMP-12/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
MCP1700T-3302E/MB
MCP1700T-3302E/MB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.25 A and a nominal output voltage of 3.3 V. It is commonly used in applications requiring stable voltage regulation, such as automotive electronics and industrial control systems.
SPX5205M5-L-3-3/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Output Voltage-1: 3.366 V;
TLV1117LV28DCYR
TLV1117LV28DCYR by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and dropout voltage of 0.8V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM2936HVMAX-5.0/NOPB
LM2936HVMAX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 50mA. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
LT1764AEQ-1.5#TRPBF
Analog Devices
LT1764AEQ-1.5#TRPBF by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3A max output current, 0.66V dropout voltage, and 1.5V nominal output voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
TPS7A2033PDBVR
TPS7A2033PDBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It has a small outline, low profile package style with matte tin terminal finish, making it suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
MCP1702T-5002E/CB
MCP1702T-5002E/CB by Microchip Technology is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 0.65V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces with limited input voltage range.
LP2992AIM5-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4.5 %;
LM1084ISX-3.3/NOPB
LM1084ISX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 5.5A and an operating temperature range from -40°C to 125°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces such as portable electronic devices or automotive systems.
LP5951MF-1.8/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.5 %;
MIC37100-3.3WS-TR
MIC37100-3.3WS-TR by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments. With an operating temperature range from -40°C to 125°C, it offers reliable performance in various industrial settings.
LM2937ES-8.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
ADP7118ARDZ-5.0-R7
ADP7118ARDZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with a max output current of 0.2A and operating temperature range from -40 to 125°C. It features a small outline package style suitable for surface mount applications, making it ideal for various electronic devices requiring stable 5V power supply.
LM2937ESX-5.0/NOPB
LM2937ESX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
ADM7172ACPZ-5.0-R7
ADM7172ACPZ-5.0-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 2A Max Output Current, and 0.27V Max Dropout Voltage. Ideal for applications requiring stable voltage regulation in compact spaces due to its small package size and low dropout voltage.
LD29150DT33R
LD29150DT33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MC33269DTRK-3.3G
Onsemi
MC33269DTRK-3.3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. It has a small outline package style, operates b/w -40 to 150 °C, and offers low dropout voltage of 1.1V for applications requiring stable voltage regulation in compact designs.
NCV8664ST50T3G
NCV8664ST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.15 A and an operating temperature range from -40 to 125°C. It features a small outline package style, making it suitable for applications requiring precise voltage regulation in automotive electronics and other compact devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SPX1117M3-L-5-0/TR
Exar
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LD1117V33C
LD1117V33C by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LD1117V33
LD1117V33 by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.3 A. It features a max dropout voltage of 1.2 V, making it suitable for applications requiring stable voltage regulation in a compact package. With an operating temperature range from 0 to 125°C, this regulator is ideal for various electronic devices where precise power management is essential.
LD1117DT33TR
STMicroelectronics LD1117DT33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It features a small outline package, operates b/w 0-125°C, and has a dropout voltage of 1.1V. Ideal for applications requiring stable voltage regulation in compact designs.
LD1117DT33CTR
STMicroelectronics LD1117DT33CTR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117AS33TR
STMicroelectronics LD1117AS33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1A max output current. It has a small outline package style, matte tin terminal finish, and operates b/w 0°C to 125°C. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LD1117DT50TR
LD1117DT50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1.3A. It operates in an input voltage range of 6.5V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
LD1117ADT33TR
LD1117ADT33TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in an input voltage range of 4.75V to 10V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in electronic devices where space is limited.
LD1117S12TR
LD1117S12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LD1117S50CTR
LD1117S50CTR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V, suitable for applications requiring stable 5V output voltage. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices in different environments. The package style is small outline with gull wing terminals, offering compact design and easy surface mount installation.
LD1117V50
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %;
LD1117DT12TR
LD1117DT12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max dropout voltage of 1.2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117DT50CTR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %;
LD1117DT25TR
LD1117D33TR
STMicroelectronics LD1117D33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It features a small outline package, operates b/w 0-125°C, and has a dropout voltage of 1.1V, making it ideal for various applications requiring stable voltage regulation in compact designs.
LD1117DT33C
LD1117DT33C by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117V18
LD1117DT18
LD1117DT18 by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a nominal output voltage of 1.8V. It operates in an input voltage range from 3.3V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, ideal for space-constrained PCB layouts.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved