Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LD1117AV18 by STMicroelectronics is a fixed positive LDO regulator with a nominal output voltage of 1.8 V and a max output current of 1 A. It operates efficiently within -40 °C to 125°C, featuring a max dropout voltage of 1.3 V. Ideal for powering sensitive electronics, it ensures stable performance with low line and load regulation.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Q Components
GES GmbH
Microchip USA
$4.161
IDEA Electronic Components Group
$7.007
$6.306
AZTECH Wire
$7.110
$6.830
$6.690
$6.560
MKK Technologies
$13.176
DigiPath Technology Company
Component Stockers USA
$99.990
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Vigor
Parana Technologies
$8.378
Perfect Parts
Cyclops Electronics Ltd (Excess)
Corphita
The durable plastic/epoxy package ensures reliability in various operating conditions.
A relatively low dropout voltage allows for efficient operation, maximizing battery life in portable applications.
High maximum operating temperature makes this LDO suitable for use in demanding environments.
Bipolar technology provides good performance, stability, and low noise, enhancing the overall efficiency.
The rectangular package shape is optimized for space efficiency on PCBs.
Through-hole terminals provide strong mechanical support and make soldering easier for robust applications.
The minimum operating temperature of 0 °C expands its applicability in various temperature-sensitive environments.
A minimum output voltage close to the nominal value ensures stable operation with minimal voltage drop.
A low voltage tolerance ensures the regulator maintains a consistent output voltage, crucial for sensitive electronics.
The nominal output voltage is suitable for a variety of electronic devices, especially in low-power applications.
The simple three-terminal configuration reduces complexity and requires less board space.
Flange mount design enhances heat dissipation and makes it easier to secure the regulator in place.
Fixed output voltage eliminates the need for additional external components, simplifying the design process.
A terminal pitch of 2.54 mm is standard, making this LDO compatible with a wide range of PCBs.
Extremely tight line regulation indicates stable performance across varying input voltages.
As a fixed positive single output LDO, it is ideal for supplying power to low-voltage digital circuits.
Single terminal position streamlines integration into circuit boards while maintaining ease of access.
The maximum output voltage provides flexibility for a range of devices with different voltage requirements.
Low load regulation ensures minimal variation in output voltage as load conditions change, enhancing performance.
The minimum input voltage requirement is compatible with many common power sources.
With a maximum output current of 1 A, this LDO can power a variety of applications reliably.
The nominal dropout voltage ensures effective regulation while maintaining operational efficiency.
The wide input voltage range accommodates various power supplies, enhancing application versatility.
The absolute maximum input voltage provides additional headroom for input voltage fluctuations.
Fixed Regulators - Positive Single Output LDO LD1117AV18 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from STMicroelectronics
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
LD1117AV18 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM2936DT-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
AP1117E33G-13
Diodes Incorporated
AP1117E33G-13 by Diodes Inc. is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates within an input voltage range of 4.8V to 12V, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TLV75518PDBVR
TLV75518PDBVR by Texas Instruments is a fixed positive single output LDO regulator with a maximum dropout voltage of 0.4V and an operating temperature range from -40 to 125 °C. It has a nominal output voltage of 1.8V and can handle a maximum output current of 0.5A. Its small package size and high voltage tolerance make it suitable for various applications.
LM2936MM-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LP2985AIM5-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
XC6220B331MR-G
Torex Semiconductor
XC6220B331MR-G by Torex Semiconductor is a 3.3V fixed positive single output LDO regulator with a max output current of 1A. Operating at an input voltage range of 1.6-6V, it features a low dropout voltage of 0.06V and load regulation of 0.045%. Ideal for applications requiring stable voltage supply in compact spaces due to its small outline package style and surface mount capability.
TLV70433DBVR
TLV70433DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max dropout voltage of 1.1 V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LP5912-3.3DRVT
LP5912-3.3DRVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount designs with limited space constraints.
SPX3819M5-L-3-3/TR
Exar
Exar's SPX3819M5-L-3-3/TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It features a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
NCP730ASN330T1G
NCP730ASN330T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.15A Max Output Current, and 38V Max Input Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline thin profile package style. Operating temperature range from -40°C to 125°C makes it suitable for various environments.
LT1764AEQ-1.5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.53 %;
ADP7118ACPZN5.0-R7
Analog Devices' ADP7118ACPZN5.0-R7 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.2A. It operates in an input voltage range from 6V to 20V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline package style.
LM2936M-5.0
LM2936M-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage regulation in a compact package. Operating temperature ranges from -40 to 150°C, making it versatile for various environments. This regulator has a max output current of 50mA and input voltage range of 6-60V, ideal for low-power electronic devices.
LM2936MP-5.0/NOPB
LM2936MP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM1117IMPX-3.3/NOPB
LM1117IMPX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
LP2951-50DRGR
LP2951-50DRGR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V, suitable for applications requiring stable voltage regulation. With a max output current of 0.1A and compact package style, it is ideal for space-constrained designs in various electronic devices. Operating efficiently within a wide temperature range from -40°C to 125°C, this regulator ensures reliable performance in diverse environments.
NCP511SN33T1G
NCP511SN33T1G by Onsemi is a 3.3V fixed positive LDO regulator with a max output current of 0.15A and dropout voltage of 0.2V, suitable for applications requiring stable voltage supply in compact designs. Operating temperature range from -40 to 125°C makes it versatile for various environments, while its small outline package with dual terminals ensures easy integration in space-constrained PCB layouts.
LM1117LDX-1.8/NOPB
LM1117LDX-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.8A. It operates b/w temperatures of 0 to 125°C, has a max dropout voltage of 1.3V, and is suitable for applications requiring stable voltage regulation in compact electronic devices.
NCV1117ST33T3G
NCV1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
TPS73733QDRBRQ1
TPS73733QDRBRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The package style is small outline with very thin profile, ideal for space-constrained designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LD1117V33C
LD1117V33C by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LD1117V33
LD1117V33 by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.3 A. It features a max dropout voltage of 1.2 V, making it suitable for applications requiring stable voltage regulation in a compact package. With an operating temperature range from 0 to 125°C, this regulator is ideal for various electronic devices where precise power management is essential.
LD1117DT33TR
STMicroelectronics LD1117DT33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It features a small outline package, operates b/w 0-125°C, and has a dropout voltage of 1.1V. Ideal for applications requiring stable voltage regulation in compact designs.
LD1117DT33CTR
STMicroelectronics LD1117DT33CTR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117S50TR
LD1117S50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.2V. It operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117AS33TR
STMicroelectronics LD1117AS33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1A max output current. It has a small outline package style, matte tin terminal finish, and operates b/w 0°C to 125°C. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LD1117DT50TR
LD1117DT50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1.3A. It operates in an input voltage range of 6.5V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
LD1117ADT33TR
LD1117ADT33TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in an input voltage range of 4.75V to 10V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in electronic devices where space is limited.
LD1117S12TR
LD1117S12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LD1117S50CTR
LD1117S50CTR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V, suitable for applications requiring stable 5V output voltage. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices in different environments. The package style is small outline with gull wing terminals, offering compact design and easy surface mount installation.
LD1117V50
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %;
LD1117DT12TR
LD1117DT12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max dropout voltage of 1.2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117DT50CTR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %;
LD1117DT25TR
LD1117D33TR
STMicroelectronics LD1117D33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It features a small outline package, operates b/w 0-125°C, and has a dropout voltage of 1.1V, making it ideal for various applications requiring stable voltage regulation in compact designs.
LD1117DT33C
LD1117DT33C by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LD1117V18
LD1117DT18
LD1117DT18 by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a nominal output voltage of 1.8V. It operates in an input voltage range from 3.3V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, ideal for space-constrained PCB layouts.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved