Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LD1086V by STMicroelectronics is an adjustable positive LDO regulator with a max dropout voltage of 1.5V and operates b/w -40 °C to 125 °C. It delivers up to 1.5A output current, ensuring stable performance in various applications. Ideal for powering sensitive electronics, it features low line and load regulation for reliable operation.
Median Price
$3.340
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
$3.000
100+ parts
$1.860
1k+ parts
$1.125
10k+ parts
-
Forefront Electronics and Design
$3.680
Vyrian
Digiode
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Anansix
ComSIT Distribution GmbH
Ack Elektronik San.Tic.Ltd.Sti
Dan-Mar Components
Zilex Electronics Inc.
J2 Sourcing AB
Rebound Electronics
Cyclops Electronics Ltd
Microfarads
Microchip USA
$1.884
IDEA Electronic Components Group
$2.021
$1.819
MKK Technologies
$3.801
DigiPath Technology Company
AZTECH Wire
$15.690
Component Stockers USA
$99.990
RC Electronics
Authorized Procurement Solutions
A-Z Elektronik GmbH
Kepictronics
Vigor
Alle Elektronik GmbH
Perfect Parts
Infinite Electronics LLP (Excess)
Parana Technologies
$2.417
Corphita
Assy Fe
The relatively low maximum dropout voltage allows for efficient operation even in low input-output voltage scenarios, making this LDO a suitable choice for battery-powered applications.
A high maximum operating temperature ensures reliable performance and longevity in demanding environments, making it ideal for automotive and industrial applications.
Bipolar technology enhances the linearity and performance of the regulator, ensuring stable output voltage over varying load conditions.
The rectangular package shape is space-efficient and can be easily integrated into various circuit board layouts.
Through-hole mounting provides robust mechanical stability and is suitable for applications requiring high durability.
The ability to operate at low temperatures allows for deployment in extreme environmental conditions, making it versatile across various applications.
A low minimum output voltage provides flexibility in design, accommodating low-voltage microcontrollers and other components.
Three terminals simplify circuit design, allowing easy integration into both simple and complex electronic systems.
Excellent line regulation ensures the output voltage remains stable despite variations in input voltage, enhancing system reliability.
Flange mount style facilitates easy heat dissipation and improves thermal management in high-load applications.
The adjustable feature offers designers the flexibility to set the output voltage to a precise level, catering to various application requirements.
Strong load regulation minimizes output voltage variations under different load conditions, ensuring consistent performance.
A standard terminal pitch of 2.54 mm makes it compatible with a wide range of circuit board layouts and simplifies assembly.
As an adjustable positive single output LDO, it suits a wide range of applications requiring stable and reliable power management.
The matte tin terminal finish provides resistance against corrosion, ensuring long-term reliability in various environments.
Single terminal position aids in seamless integration into circuits without complex layout considerations.
A maximum output voltage close to 1.3 V supports a wide range of low-voltage applications, particularly in logic and interface circuits.
This LDO can deliver sufficient output current for many applications, making it suitable for powering microcontrollers and other devices.
A nominal dropout voltage of 1.3 V allows for effective voltage regulation even with small differences between input and output voltages.
Adjustable Regulators - Positive Single Output LDO LD1086V attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from STMicroelectronics
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
LD1086V Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Nte Electronics
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LT3080EMS8E#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; Maximum Output Voltage-1: 36 V;
TPS7A1901DRBT
Texas Instruments
TPS7A1901DRBT by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 18V and a max output current of 0.45A. It is commonly used in applications that require precise voltage regulation, such as power management systems in electronic devices.
LT1763CS8#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Surface Mount: YES;
LT3042MPDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Operating Temperature (TJ-Max): 150 Cel; Package Body Material: PLASTIC/EPOXY;
TPS78101DDCR
TPS78101DDCR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.15A and a min input voltage of 2.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs where efficient power management is crucial.
TPS7A8001DRBR
TPS7A8001DRBR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 6.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style is small outline with a very thin profile, ideal for space-constrained designs.
LT1129CQ#TRPBF
Analog Devices
LT1129CQ#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.7A and a max dropout voltage of 0.7V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS7A8400ARGRR
TPS7A8400ARGRR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A. It has a wide operating temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation. Its compact package style and surface mount capability make it easy to integrate into electronic designs.
LT3012HFE#TRPBF
LT3012HFE#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 60V and a max output current of 0.25A. It operates in temperatures ranging from -40°C to 140°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs.
AP2205-W5-7
Diodes Inc. AP2205-W5-7 is an adjustable positive single output LDO regulator with a max output voltage of 22V and dropout voltage of 0.5V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices needing stable power supply. Package style is small outline, low profile, shrink pitch with gull wing terminals for surface mount assembly.
LM2941S
LM2941S by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 26V. It is commonly used in applications that require voltage regulation, such as power supplies and battery chargers.
TPS7A2401DBVR
TPS7A2401DBVR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.2 A and a min input voltage of 2.4 V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces. With an operating temperature range from -40 to 125°C, this regulator is ideal for various electronic devices where stable power supply is crucial.
LT3014BES5#PBF
LT3014BES5#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 60V and a dropout voltage of 0.57V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3085EDCB#TRMPBF
LT3085EDCB#TRMPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS73101DBVT
TPS73101DBVT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.15A and a max dropout voltage of 0.1V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices where space and thermal management are critical factors.
LP38798SD-ADJ/NOPB
LP38798SD-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a max input voltage of 20V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, very thin profile, ideal for surface mount designs.
LT1761ES5-BYP#TRMPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
LP3965EMP-ADJ/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: SOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Packing Method: TR;
TPS73201DBVT
TPS73201DBVT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.25A and a max dropout voltage of 0.15V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM2941LD/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Length: 4 mm; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LD1086D2MTR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Max): 125 Cel;
LD1086BV-DG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; Package Body Material: UNSPECIFIED; Technology: BIPOLAR;
LD1085V
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Body Material: UNSPECIFIED; JESD-609 Code: e3;
LD1085CDT-R
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Package Style (Meter): SMALL OUTLINE;
LD1085D2T-R
LD1085D2T-R by STMicroelectronics is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 1.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style is small outline (SO) with gull wing terminals, ideal for surface mount assembly processes.
LD1085P
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Technology: BIPOLAR; Packing Method: TUBE;
LD1085D2M-R
LD1085D2M-R by STMicroelectronics is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 1.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LD1084V
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): .4 %;
LD1086PUR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: 1.25 V; Moisture Sensitivity Level (MSL): 1;
LD1085DT
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; JESD-609 Code: e0; Length: 6.5 mm;
LD1085DT-R
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Length: 6.5 mm;
LD1085DTTR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Surface Mount: YES; Maximum Dropout Voltage-1: 1.3 V;
LD1085D2TTR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Operating Temperature (TJ-Min): -40 Cel;
LD1085CDT
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; No. of Functions: 1;
LD1084D2T
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Package Body Material: PLASTIC/EPOXY;
LD1085CP
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Line Regulation (%/V): .014; JESD-30 Code: R-PSFM-T3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LD1084D2M-R
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Technology: BIPOLAR; Maximum Seated Height: 4.83 mm;
LD1084D2T-R
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Peak Reflow Temperature (C): 245; Adjustability: ADJUSTABLE;
LD1085D2M
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Terminal Pitch: 2.54 mm; Moisture Sensitivity Level (MSL): 1;
LD1084D2TTR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Operating Temperature (TJ-Max): 125 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved