Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L7809CF by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 9V and max current of 1.5A. It operates within a temperature range of 0-150°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Nova Conductors
Corohmni
$3.354
Semicontronic
$3.500
$3.412
$3.395
Aztec Data Supply Inc.
$4.870
Microchip USA
$6.082
AZTECH Wire
$7.707
IDEA Electronic Components Group
$8.730
$7.857
Ampacity Inc.
$15.500
MKK Technologies
$16.416
DigiPath Technology Company
Component Stockers USA
$99.990
Continental Prestige Electronics
Argo Parts USA
Corphita
Vigor
Parana Technologies
$10.438
Bastille Electronics
Durable and lightweight material for compact and reliable design.
Allows for operation in high temperature environments without risk of malfunction.
Provides stable and accurate regulation of voltage output.
Provides a steady output voltage for consistent performance.
Ease of installation and secure connection for stable operation.
Capable of delivering sufficient current for various applications.
Wide input voltage range for versatile compatibility with different power sources.
Fixed Regulators - Positive Single Output Standard L7809CF attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
L7809CF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Telefunken Microelectronics
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Mde Semiconductor
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Synsemi
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
SG7805AK
Linfinity Microelectronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 3 %; Package Body Material: METAL;
MC78L05ABD
Motorola
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
UA78L05AIDRE4
UA78L05AIDRE4 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates within a temperature range of -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline (SOIC) with surface mount capability, ideal for PCB integration in consumer electronics and industrial devices.
MC78L05ACDX
Rochester Electronics
ZSR330GTA
Zetex Plc
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
L78L15ACD
STMicroelectronics
STMicroelectronics' L78L15ACD is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in electronic devices.
1839
Nte Electronics
The Nte Electronics 1839 is a fixed positive single output standard regulator with 5 terminals in a rectangular plastic/epoxy package. It features through-hole terminal form and flange mount package style. Ideal for voltage regulation in electronic circuits, power supplies, and industrial applications.
LM140H-5.0/883
LM140H-5.0/883 by Texas Instruments is a MIL-STD-883 compliant fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -55 to 125 °C and is suitable for applications requiring stable voltage regulation in harsh environments.
LM78L12ACZ/LFT4
LM78L12ACZ/LFT4 by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0-125°C. It offers a nominal output voltage of 12V, max load regulation of 0.1%, and max input voltage of 30V. Ideal for applications requiring stable power supply in various electronic devices.
L78L12CD13TR
STMicroelectronics' L78L12CD13TR is a fixed positive single output standard regulator with an output voltage of 12V and max load regulation of 0.1%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage outputs in compact designs.
UA78M05CKVURG3
UA78M05CKVURG3 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. With surface mount capability and small outline design, it is ideal for space-constrained PCB layouts where reliable power delivery is essential.
LM78M05CDTX
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
5962-8778201UA
International Rectifier Hirel Products
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: PIN/PEG; Maximum Voltage Tolerance: 6 %; JESD-30 Code: R-XSFM-P3; Maximum Input Voltage: 25 V;
MC78L24ACPRA
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY;
LM109H/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 8 %; Maximum Load Regulation: .05 %;
UA78L09ACD
The Texas Instruments UA78L09ACD is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The device comes in a small outline package with gull wing terminals for surface mount assembly.
MC7818ACTG
MC7818ACTG by Onsemi is a fixed positive single output standard regulator with 18V nominal output voltage and 1A max output current. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The device features a bipolar technology, through-hole terminal form, and matte tin finish for reliable performance.
L7815ACD2T-TR
L7815ACD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. It operates within a temperature range of 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7805BD2TG
MC7805BD2TG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w -40 to 125°C, suitable for various applications requiring stable voltage supply in compact designs. The package is small outline with gull wing terminals, ideal for surface mount assembly.
LP3990QTLX-2.8Q1
LP3990QTLX-2.8Q1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 2.8V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation in a compact grid array package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
L7805ABD2T-TR
L7805ABD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with 5V nominal output voltage, 1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact form factor, such as consumer electronics and industrial control systems.
L7805ACV
L7805ACV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and a max output current of 1A. It operates within a temperature range of 0 to 125°C and is commonly used in applications requiring stable voltage regulation, such as power supplies and electronic devices.
L7805CP
L7805CP by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, making it easy to integrate into PCB designs.
L7805ABV
L7805ABV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse environments.
L7805CV-DG
L7805CV-DG by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability.
L7805ACD2T-TR
L7805ACD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L7805CD2T-TR
L7805CD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L7805CDT-TR
L7805CDT-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates within a temperature range of 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient power management solutions.
L7805ABV-DG
L7805ABV-DG by STMicroelectronics is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 1.5A and can handle input voltages from 7.5V to 25V. This regulator is commonly used in applications that require a stable 5V power supply.
L7805ABP
STMicroelectronics L7805ABP is a BIPOLAR technology fixed positive single output standard regulator with 3 terminals. It has an output voltage of 5V, max current of 1A, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
L7809CV
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
L7805ACP
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 2 %;
L7808CV
L7805ACV-DG
L7805ACV-DG by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals for easy installation.
L7805CT
STMicroelectronics L7805CT is a BIPOLAR technology fixed regulator with 3 PIN/PEG terminals. It has a nominal output voltage of 5V, max output current of 1.5A, and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring a reliable fixed positive single output standard regulator with precise voltage regulation.
L7805CD2T
L7805CD2T by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates within a temperature range of 0-150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L7806CV
L7806CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 6V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse circuit designs.
L7805C-D2TR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7809CV-DG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved