Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
Median Price
$0.420
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.224
1k+ parts
$0.189
10k+ parts
-
Mouser Electronics
$0.225
$0.190
Newark
$0.422
$0.244
$0.202
Element14
$0.707
$0.428
$0.331
Verical
$0.150
Farnell
$0.253
$0.197
$0.168
Nova Conductors
$0.216
Chip Stock
Vyrian
NAC Semi
$0.277
Semicontronic
$0.128
$0.125
$0.124
Ampacity Inc.
Argo Parts USA
$0.210
Continental Prestige Electronics
$0.520
$0.268
$0.175
Microchip USA
$1.209
Advanced Electronics
$2.797
$2.658
Corohmni
$3.762
Modulus Dynamics
$7.395
Aztec Data Supply Inc.
$8.420
Lixinc
Fixed Regulators - Positive Single Output Standard ZXTR2012FF-7 attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Diodes Incorporated
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Regulator Type:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
ZXTR2012FF-7 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Sangdest Microelectronics (Nanjing)
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ZSR500GTA
Zetex Plc
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
SG7805AK/883B
Microsemi
SG7805AK/883B by Microsemi is a MIL-STD-883 Class B compliant fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. Operating temperature ranges from -55 to 150°C, making it suitable for rugged environments in military and aerospace applications. With a package style of flange mount and terminal finish of tin lead, this bipolar technology regulator offers precise voltage regulation for critical systems.
L78L05ACD13TR
STMicroelectronics
L78L05ACD13TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.07A. It operates within a temperature range of 0-125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78L05ACP
Rochester Electronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 4 %;
DI78L24ZAB
Diotec Semiconductor Ag
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 3;
LP3990QTLX-2.8Q1
LP3990QTLX-2.8Q1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 2.8V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation in a compact grid array package.
NCV78L05ABDR2G
NCV78L05ABDR2G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
L7805AC-D2TR
STMicroelectronics L7805AC-D2TR is a fixed positive single output standard regulator with 5V nominal output voltage and 1A max output current. It operates b/w 0-150°C, suitable for various applications requiring stable voltage supply in compact designs. The package is surface mountable, making it ideal for space-constrained electronic devices.
MC78M05CDT
MC78M05CDT by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It has a package style of small outline, operates b/w 0-125°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
UA78L06ACLPR
UA78L06ACLPR by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 6.2V, max load regulation of 0.08%, and can handle a max output current of 0.1A. Ideal for applications requiring stable voltage regulation in electronic circuits.
MC78L12ACDG
MC78L12ACDG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage, 0.1A max output current, and 4.16% max voltage tolerance. It is used in applications requiring stable power supply such as consumer electronics and industrial equipment.
MC7805CT
Vishay Semiconductors
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Output Voltage-1: 4.85 V; Qualification Status: Not Qualified;
UA78L12ACLP
UA78L12ACLP by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 12V and max load regulation of 0.1%. It operates within a temperature range of 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package.
L7805ACV
L7805ACV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and a max output current of 1A. It operates within a temperature range of 0 to 125°C and is commonly used in applications requiring stable voltage regulation, such as power supplies and electronic devices.
MC78L24ACPRA
MC78L24ACPRA by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 24V and max load regulation of 0.2%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
AS78L05CZTR-E1
Diodes Incorporated
AS78L05CZTR-E1 by Diodes Inc. is a fixed positive single output standard regulator with 5V nominal output voltage and 0.1A max output current. It operates b/w -40 to 125 °C, has a max input voltage of 36V, and offers low line/load regulation making it ideal for various electronic applications.
L78L05CD13TR
STMicroelectronics L78L05CD13TR is a fixed positive single output standard regulator with 5V nominal output voltage. It operates at an input voltage range of 7-20V, providing a max output current of 0.07A. With a compact rectangular package style and Gull Wing terminal form, it's ideal for surface mount applications in various electronic devices.
MC78M12CTG
MC78M12CTG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage, 0.5A max output current, and 2% max voltage tolerance. It operates b/w 0-125°C making it suitable for various applications requiring stable power supply in electronic devices.
LM340MPX-5.0
LM340MPX-5.0 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage supply in compact spaces due to its small outline package style.
LM140H-5.0/883
LM140H-5.0/883 by Texas Instruments is a MIL-STD-883 compliant fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -55 to 125 °C and is suitable for applications requiring stable voltage regulation in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ZXTR2005ZQ-13
ZXTR2005ZQ-13 by Diodes Inc. is a fixed positive single output standard regulator with 5V nominal output voltage, 0.1A max output current, and 10% voltage tolerance. It's ideal for applications requiring stable power supply in automotive electronics due to AEC-Q101 screening and -40°C to 125°C operating temperature range.
ZXTR2012Z-7
ZXTR2012Z-7 by Diodes Inc. is a fixed positive single output standard regulator with 12V nominal output voltage, 10% voltage tolerance, and 0.03A max output current. It is ideal for applications requiring a compact solution with an operating temperature range from -40 to 125°C, such as automotive electronics or industrial control systems.
ZXTR2012P5-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
ZXTR2005Z-13
ZXTR2005Z-13 by Diodes Inc. is a fixed positive LDO regulator with 5V output voltage, 0.1A max current, and 10% voltage tolerance. It operates b/w -40 to 125°C, suitable for applications requiring stable low power supply in compact designs with SMD packaging.
ZXTR2005Z-7
ZXTR2005Z-7 by Diodes Inc. is a fixed positive LDO regulator with 5V output voltage, 0.1A max current, and 10% voltage tolerance. Ideal for applications requiring stable power supply in temperature range of -40 to 125°C, it comes in a surface-mount package suitable for various electronic devices.
ZXTR2012Z-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 100 V; Maximum Voltage Tolerance: 10 %;
ZXTR2105F-7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Package Style (Meter): SMALL OUTLINE;
ZXTR2012K-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
ZXTR2105FFQ-7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
ZXTR2105FF-7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOF; Terminal Form: FLAT; Maximum Voltage Tolerance: 5 %; Screening Level: AEC-Q100;
ZXTR2105FQ-7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %;
ZXTR2112F-7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 10 %; Maximum Output Current-1: .015 A;
ZXTR1005K4-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; JESD-609 Code: e3;
ZXTR2005K-13
FIXED POSITIVE LDO REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 100 V; Maximum Voltage Tolerance: 10 %; Packing Method: TR; Maximum Line Regulation: .3 %;
ZXTR2112FQ-7
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
ZXTR2008K-13
FIXED POSITIVE LDO REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 100 V; Maximum Voltage Tolerance: 10 %; Moisture Sensitivity Level (MSL): 1; Surface Mount: YES;
ZXTR2005P5-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOF; Terminal Form: FLAT; Maximum Voltage Tolerance: 10 %; Minimum Output Voltage-1: 4.5 V;
ZXTR2008P5-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOF; Terminal Form: FLAT; Maximum Voltage Tolerance: 10 %; Nominal Output Voltage-1: 8.2 V;
ZXTR1005PD8-13
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved