Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L4976D013TR by STMicroelectronics is a switching regulator with 2.5A output current and 300kHz max switching frequency. It operates in buck configuration, uses pulse width modulation control technique, and has a voltage-mode control mode. This IC is ideal for applications requiring efficient power conversion in compact spaces.
Median Price
$5.710
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$3.650
1k+ parts
$3.280
10k+ parts
-
Nova Conductors
$3.330
Digiode
$5.415
Chip Stock
Anansix
Bristol Electronics
Vyrian
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
Continental Prestige Electronics
$3.263
Argo Parts USA
Netroflash
$3.163
$3.097
Vigor
$4.610
Ampacity Inc.
$4.960
Corphita
$5.130
Aztec Data Supply Inc.
$8.477
IDEA Electronic Components Group
$13.564
$12.208
AZTECH Wire
$15.350
$14.740
$14.450
$14.160
Microchip USA
$20.340
$20.220
$20.150
$20.090
MKK Technologies
$25.507
DigiPath Technology Company
iodParts Technologies Inc.
Perfect Parts
RC Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Authorized Procurement Solutions
Lixinc
Futuretech Components
Parana Technologies
$16.218
Kepictronics
The use of plastic/epoxy material ensures durability and reliability of the product, making it suitable for long-term use.
The surface mount feature allows for easy installation on a circuit board, saving space and making it suitable for compact designs.
Having 16 terminals provides flexibility in connectivity and allows for a variety of input and output configurations.
The high maximum output current of 2.5 A enables the product to handle a wide range of loads effectively.
Pulse width modulation allows for precise control of the output voltage, resulting in efficient power conversion and regulation.
Switching Regulators & Controllers L4976D013TR attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
L4976D013TR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - CRP/14/8400 20/Mar/2014
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3GEY0R00V
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Taitron Components
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
TPS63001DRCR
TPS63001DRCR by Texas Instruments is a switching regulator with a max output current of 2A and min output voltage of 3.3V, ideal for industrial applications. It operates b/w -40 to 85°C, uses pulse width modulation control technique, and has a compact square package style.
LM2596S-ADJ
First Components International
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LT8641IUDC#PBF
Analog Devices
Analog Devices' LT8641IUDC#PBF is a current-mode switching regulator with 9.9A output current, 3000kHz max switching frequency, and 6-65V input voltage range. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
UCC28C45DGK
UCC28C45DGK by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. The IC features a small outline package with dual terminals and Gull Wing form, ideal for compact designs requiring efficient pulse width modulation control.
LM2672M-ADJ
LM2672M-ADJ by Texas Instruments is a voltage-mode switching regulator with 1A output current, 1.23V min and 37V max output voltage. Ideal for automotive applications, it operates b/w -40°C to 125°C temperature range and supports pulse width modulation control technique.
LM3478MM
LM3478MM by Texas Instruments is a switching controller with current-mode control technique. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output voltage of 500V and output current of 1A, it uses pulse width modulation at a frequency of up to 1000 kHz for buck-boost configurations.
LM5118Q1MHX/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ31530RLGT
LMZ31530RLGT by Texas Instruments is a 30A BUCK switching regulator with a voltage-mode control mode. It operates b/w -40 to 85°C, has a max output voltage of 3.6V, and a min input voltage of 3V. Ideal for industrial applications requiring high efficiency power conversion in compact spaces.
LM2674M-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2670S-ADJ/NOPB
LM2670S-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output of 37V and 3A current. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its small outline package and pulse width modulation control technique. With a wide input range of 6.5-40V, this buck switcher offers efficient power conversion up to 400kHz frequency.
LM2674MX-ADJ/NOPB
LMZ31707RVQR
LMZ31707RVQR by Texas Instruments is a switching regulator with a max output current of 7A and a max input voltage of 17V. It operates in a temperature range of -40 to 85°C and is commonly used in industrial applications.
IR1155STRPBF
International Rectifier
POWER FACTOR CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Current (Isup): 13 mA;
TPS560430YFDBVR
TPS560430YFDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and max output voltage of 24V, ideal for automotive applications. It operates b/w -40 to 125°C, supports a wide input voltage range from 4-36V, and uses pulse width modulation control technique.
LMZ14203EXTTZ/NOPB
LMZ14203EXTTZ/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for military applications due to its MIL-TEMP grade, it operates b/w -55°C to 125°C and has a compact package style suitable for space-constrained designs.
LM5145QRGYRQ1
Texas Instruments LM5145QRGYRQ1 is a 20-terminal switching controller with voltage-mode control, operating b/w -40 to 150°C. It features a buck switcher configuration, supporting input voltages from 5.5V to 75V and output voltages ranging from 0.8V to 60V. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
AP3012KTR-G1
Diodes Inc.'s AP3012KTR-G1 is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports boost configuration with a max frequency of 1900 kHz. Ideal for industrial applications requiring a nominal input voltage of 3V and output voltage of 24V.
TPS54140DGQR
TPS54140DGQR by Texas Instruments is a switching regulator with a max output current of 1.5A and max operating temp of 150°C. Ideal for automotive applications, it operates in buck configuration with PWM control mode and supports input voltages from 3.5V to 42V.
SG3525AN
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
L5970D013TR
L5970D013TR by STMicroelectronics is a voltage-mode switching regulator with a max output current of 2.25A and a max switching frequency of 280kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 4.4V to 36V, and features pulse frequency modulation control technique.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT3437EDD#PBF
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
L4978D013TR
L4978D013TR by STMicroelectronics is a switching regulator with 16 terminals, voltage-mode control, and BCDMOS technology. It operates at a max output current of 3.5A and a switching frequency of 300kHz. Ideal for applications requiring efficient power conversion in compact spaces.
L4971D
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G16;
L4971D013TR
L4971D013TR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, BCDMOS technology, and a max output current of 3A. It operates in buck configuration at a max switching frequency of 300kHz, suitable for applications requiring efficient power conversion in compact spaces.
L4971
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Seated Height: 5.08 mm;
L4978
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Supply Current (Isup): 6 mA;
L4973D3.3-013TR
L4973D3.3-013TR by STMicroelectronics is a switching regulator with a max output current of 5.5 A and a max switching frequency of 300 kHz. It is commonly used in applications requiring voltage-mode control, such as power supplies and battery chargers.
L4970A
L4970A by STMicroelectronics is a switching regulator with a max output current of 15 A and a max switching frequency of 500 kHz. It is commonly used in applications requiring voltage-mode control, such as buck converters, with an input voltage range of 15 V to 50 V.
L4974A
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: BCDMOS;
L4978D
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Current (Isup): 6 mA;
L4973V3.3
SWITCHING REGULATOR; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
L4975A
L4975A by STMicroelectronics is a 15-terminal switching regulator with a max output current of 7.5 A and a max switching frequency of 500 kHz. It operates in buck configuration, suitable for applications requiring a nominal input voltage of 35 V and nominal output voltage of 5.1 V.
L4973D3.3
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
L4973D5.1
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 55 V;
L4972A
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Input Voltage: 35 V;
L4973D5.1-013TR
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
L4972AD
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Technology: BCDMOS;
L4973V3
SWITCHING REGULATOR; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
L4972AD013TR
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 12.8 mm;
L4973V5
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved