Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L4972AD by STMicroelectronics is a switching regulator with 3.5A output current and 200kHz max switching frequency. It features voltage-mode control, BCDMOS technology, and pulse width modulation technique. Ideal for applications requiring efficient power management in compact spaces.
Median Price
$3.505
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
$2.943
10k+ parts
$2.914
Verical
$3.731
$2.945
$2.915
Chip1Stop
$3.610
$3.240
Rochester
$3.400
$3.040
$2.860
Digiode
$3.600
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
Anansix
ComSIT Distribution GmbH
Sinequanon
Zilex Electronics Inc.
Huijzer Components
LittleDiode
Corphita
$3.411
Vigor
$5.020
AZTECH Wire
$6.120
$5.880
$5.760
$5.640
IDEA Electronic Components Group
$9.904
$8.913
MKK Technologies
$18.623
DigiPath Technology Company
A-Z Elektronik GmbH
Perfect Parts
Microchip USA
Alle Elektronik GmbH
Kepictronics
Assy Fe
Cyclops Electronics Ltd (Excess)
Parana Technologies
$11.842
iodParts Technologies Inc.
This material is lightweight and durable, making the product easy to handle and resistant to damage.
Being surface mountable allows for easy and efficient installation on circuit boards.
Voltage-mode control provides accurate regulation of output voltage, ensuring stable performance.
With a high maximum output current, this product can support power-hungry applications.
The buck configuration allows for efficient step-down voltage conversion, making this product energy-efficient.
Switching Regulators & Controllers L4972AD attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
L4972AD Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Bkc Semiconductors
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Comchip Technology
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LMR16006YDDCR
LMR16006YDDCR by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range from 4V to 60V.
AP3012KTR-G1
Diodes Incorporated
Diodes Inc.'s AP3012KTR-G1 is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports boost configuration with a max frequency of 1900 kHz. Ideal for industrial applications requiring a nominal input voltage of 3V and output voltage of 24V.
TPS55340RTET
TPS55340RTET by Texas Instruments is a switching regulator with a 3-38V output voltage range, ideal for automotive applications. Operating b/w -40 to 150°C, it features a 1200kHz switching frequency and current-mode control technique. With a compact chip carrier package style, it offers high efficiency in power management solutions.
LMR54406FDBVR
LMR54406FDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125 °C. It has a max output voltage of 28 V and current of 0.6 A, suitable for applications requiring a compact design and efficient power management in various electronic devices.
TPS61222DCKR
TPS61222DCKR by Texas Instruments is a switching regulator with max output current of 0.4A and max operating temp of 85°C. Ideal for battery charge control applications, it operates in boost configuration with min input voltage of 0.7V and nominal output voltage of 5V.
LM5146RGYR
LM5146RGYR by Texas Instruments is a switching controller with a max output voltage of 60V and max output current of 20A. Operating in voltage-mode control technique, it has a wide input voltage range from 5.5V to 100V, making it suitable for automotive applications requiring high power efficiency. With a compact chip carrier package style and very thin profile, this regulator is ideal for space-constrained designs in automotive electronics.
LMR14206XMK/NOPB
LMR14206XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.765V to 34V. It is designed for automotive applications, featuring a compact rectangular package with very thin profile suitable for surface mount assembly. The control mode is current-mode PWM with max output current of 0.6A and switching frequency up to 1500kHz.
LTM4644IY-1#PBF
Analog Devices
Analog Devices' LTM4644IY-1#PBF is a switching regulator with 77 terminals, operating b/w -40 to 125°C. It features a buck switcher config, PWM control mode, and supports input voltages from 4V to 14V. Ideal for automotive applications due to its high switching frequency of 1300 kHz and compact size of 15x9mm.
MC34063AD
MC34063AD by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at 0-70°C. It has a 5V nominal input voltage, 1.25-40V output voltage range, and supports up to 100 kHz switching frequency. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package and dual terminal position.
LTC3646HDE-1#PBF
LTC3646HDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating from -40 to 150°C. It has a buck configuration, supporting input voltages from 4V to 40V and output at 5V. Ideal for automotive applications due to its small size (4x3mm) and high max switching frequency of 3kHz.
LM5118MHX/NOPB
LM5118MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output voltage of 70V and max output current of 10A. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its buck-boost switcher configuration and pulse width modulation control technique. This small outline IC has a package style with heat sink, making it suitable for compact designs requiring high efficiency.
LM25011AQ1MYX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
LMZ14202HTZX/NOPB
LMZ14202HTZX/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact size of 10.16mm x 9.85mm x 4.82mm.
LTM8055IY#PBF
Analog Devices LTM8055IY#PBF is a switching regulator with 121 terminals, operating temp. range -40 to 125°C. It uses current-mode control technique, supports input voltage of 5-36V, and has a buck-boost switcher config. Ideal for automotive applications due to its moisture sensitivity level of MSL3 and compact square package design (15x15mm).
LMR51420YFDDCR
LMR51420YFDDCR by Texas Instruments is a current-mode switching regulator with max output voltage of 34.2V and max output current of 2A. Ideal for applications requiring pulse width modulation control technique, such as small outline, thin profile designs in automotive electronics.
LM2664M6/NOPB
LM2664M6/NOPB by Texas Instruments is a small outline, low profile switched capacitor converter with 6 terminals. It operates at -40 to 85°C, providing -5.5V output voltage from a 1.8-5.5V input range. With a max output current of 0.04A and switching frequency of 80kHz, it's ideal for industrial applications requiring efficient voltage conversion in compact spaces.
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
A8498SLJTR-T
Allegro MicroSystems
Allegro MicroSystems' A8498SLJTR-T is a switching regulator with 5A output current, 1.2kHz max frequency, and 42V nominal input voltage. Ideal for applications requiring current-mode control, such as low-profile electronic devices needing efficient power management in a small outline package.
LMR54410FDBVR
LMR54410FDBVR by Texas Instruments is a switching regulator with a 1A output current and 1100 kHz max switching frequency. It operates b/w -40 to 125°C, suitable for various applications requiring a compact design and efficient power management in the voltage range of 4-36V.
LM2594MX-3.3/NOPB
LM2594MX-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V output, suitable for automotive applications. It operates b/w -40 to 125°C, handles up to 0.5A output current, and supports input voltages from 4.5V to 40V. This small outline IC uses pulse width modulation control technique at a max frequency of 173kHz for efficient buck conversion.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L4972AD013TR
ST Micro
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 12.8 mm;
L4978D013TR
L4978D013TR by STMicroelectronics is a switching regulator with 16 terminals, voltage-mode control, and BCDMOS technology. It operates at a max output current of 3.5A and a switching frequency of 300kHz. Ideal for applications requiring efficient power conversion in compact spaces.
L4971D
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G16;
L4971D013TR
L4971D013TR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, BCDMOS technology, and a max output current of 3A. It operates in buck configuration at a max switching frequency of 300kHz, suitable for applications requiring efficient power conversion in compact spaces.
L4971
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Seated Height: 5.08 mm;
L4978
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Supply Current (Isup): 6 mA;
L4973D3.3-013TR
L4973D3.3-013TR by STMicroelectronics is a switching regulator with a max output current of 5.5 A and a max switching frequency of 300 kHz. It is commonly used in applications requiring voltage-mode control, such as power supplies and battery chargers.
L4970A
L4970A by STMicroelectronics is a switching regulator with a max output current of 15 A and a max switching frequency of 500 kHz. It is commonly used in applications requiring voltage-mode control, such as buck converters, with an input voltage range of 15 V to 50 V.
L4974A
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: BCDMOS;
L4978D
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Current (Isup): 6 mA;
L4973V3.3
SWITCHING REGULATOR; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
L4975A
L4975A by STMicroelectronics is a 15-terminal switching regulator with a max output current of 7.5 A and a max switching frequency of 500 kHz. It operates in buck configuration, suitable for applications requiring a nominal input voltage of 35 V and nominal output voltage of 5.1 V.
L4976D013TR
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
L4973D3.3
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
L4973D5.1
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 55 V;
L4972A
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Input Voltage: 35 V;
L4973D5.1-013TR
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
L4973V3
SWITCHING REGULATOR; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
L4973V5
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved