Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ECMF4-40A100N10 by STMicroelectronics is a surface mount data line filter with 4 functions and 10 terminals. It operates b/w -55 °C to 125 °C, featuring a capacitance of 0.25 µF and an output impedance of 50 Ω. Ideal for high-frequency signal integrity in electronic applications.
Median Price
$0.254
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$0.459
100+ parts
$0.309
1k+ parts
$0.269
10k+ parts
-
Mouser Electronics
$0.640
$0.414
$0.300
$0.251
Chip1Stop
Arrow
$0.229
Verical
Avnet
Digiode
$0.656
Vyrian
Anansix
Corphita
$0.621
IDEA Electronic Components Group
$2.622
$2.360
MKK Technologies
$4.930
DigiPath Technology Company
Glotronic Ltd.
Parana Technologies
$3.135
Northwest PG Solutions
Native Components
Compliant with international IEC standards, ensuring quality and reliability.
Offers versatile functionality which enhances applications in various electronic devices.
Provides ample connectivity options to accommodate multiple wiring configurations.
Specifically designed to filter noise on data lines, enhancing signal integrity and performance.
Capable of operating under high temperatures, making it suitable for demanding applications.
Functions well in extreme cold, ensuring reliability in harsh environments.
Compact size allows for space-saving designs in tight layouts.
Short length contributes to a minimal footprint, ideal for miniaturized applications.
Standard impedance ensures compatibility with a wide range of RF applications.
Tape and reel packing enhances convenience for automated assembly processes.
Facilitates easy integration into modern PCB designs, providing a reliable connection.
Slim profile allows for high-density circuit layouts without sacrificing performance.
Optimal capacitance value aids in effective filtering of unwanted signals, ensuring clean data transmission.
Data Line Filters ECMF4-40A100N10 attributes and parameters. Explore more Data Line Filters devices from STMicroelectronics
Approvals (V):
Capacitance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Width (mm):
ECMF4-40A100N10 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
1552200168
Molex
WIRE AND CABLE;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BLM41PG750SN1
Murata Manufacturing
Murata Manufacturing's BLM41PG750SN1 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L4.5XB1.6XH1.6 (mm), it operates b/w -55 to 125 °C, offering an output impedance of 75 OHM. Ideal for data line filtering in surface mount applications due to its low DC resistance of 0.025 ohm and compact size.
CM2021Y330R-10
Laird Technologies
CM2021Y330R-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0008 ohm and an output impedance of 33 ohm. This surface mount filter is suitable for applications requiring a rated current of 15 A.
FBMJ3216HS800-TV
Taiyo Yuden
FBMJ3216HS800-TV by Taiyo Yuden is a ferrite chip data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L3.2XB1.6XH1.1 (mm) and is suitable for applications requiring an output impedance of 80 ohms and a rated current of 4A.
4400-076
Cts
4400-076 by Cts is a Data Line Filter with FEED THROUGH CAPACITOR type, rated at 200V and 10A. It offers a max insertion loss of 28dB, operating b/w -55°C to 125°C. Ideal for panel mounting applications due to its silver terminal finish and capacitance of 100uF.
SRF3216-102Y
Bourns
Bourns SRF3216-102Y is a data line filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has min insulation resistance of 10 Mohm and DC resistance of 1 ohm. Ideal for applications requiring filtering in compact spaces with surface mounting type.
MMZ2012Y152BT000
TDK
MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
TPD6F003DQDR
Texas Instruments
TPD6F003DQDR by Texas Instruments is a data line filter with 6 functions and 12 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L2.6xB1.45xH0.8 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces like consumer electronics or industrial equipment.
PA4339.701NLT
Pulse Electronics
PA4339.701NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 5uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with 4A rated current and output impedance of 700 ohm.
AWCU00453228201XTE
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Voltage: 50 V; Additional Features: IMPEDANCE AT 10 MHZ; Inductance: 200 uH; Screening Level: AEC-Q200;
744823220
Wuerth Elektronik & Kg
Wurth Elektronik 744823220 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 20000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 mm. Ideal for applications requiring noise suppression in data lines at a max current of 1.5A.
BK2125LM182-TV
BK2125LM182-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.3A current. With dimensions of L2.0XB1.25XH1.25 (mm), it has an output impedance of 1800 OHM and max DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM21BD601SN1D
Murata's BLM21BD601SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line filtering. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.35 ohm at 100 MHz frequency. This ferrite chip has dimensions L2.0xB1.25xH0.85 mm and rated current of 0.2 A, suitable for surface mount applications in various electronic devices.
NUF4401MNT1G
NUF4401MNT1G by Onsemi is a data line filter with 4 functions and a rated voltage of 5V. It has a max attenuation frequency of 900MHz and can operate at temperatures ranging from -40 to 85°C. This surface mount device is commonly used for filtering data lines in various electronic applications.
IP4256CZ5-W,115
NXP Semiconductors' IP4256CZ5-W,115 is a 5-terminal data line filter with max operating temp of 85°C and min of -40°C. It features surface mounting type, tin terminal finish, and plastic package material. Ideal for applications requiring noise suppression in data lines.
BLM21AG471SN1D
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
74279228260
Wurth Elektronik's 74279228260 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C, DC resistance of 0.008 ohm, and output impedance of 26Ω. Ideal for applications requiring surface mount filters with a rated current of 6.5A.
CM3421Y600R-10
The Laird Technologies CM3421Y600R-10 is a Data Line Filter with 2 functions and 4 terminals. It operates b/w -40°C to 125°C, has a DC resistance of 0.0008 ohm, and an output impedance of 60 ohm. Ideal for surface mount applications, it offers a rated current of 15A and compact dimensions of L8.68xB5.6xH2.85 mm.
NFM3DCC221R1H3L
Murata Manufacturing's NFM3DCC221R1H3L is a data line filter with 220uF capacitance, 50V rated voltage, and 0.3A rated current. It features feed through capacitor type and is ideal for applications requiring noise filtering in electronic circuits.
ILHB0603120+/-25%
Vishay Intertechnology
Vishay Intertechnology's ILHB0603120+/-25% is a FERRITE CHIP filter with 120 OHM output impedance, suitable for data line applications. With dimensions of L1.6xB0.8xH0.8 mm and rated current of 2A, it operates b/w -55 to 125 °C, making it ideal for surface mount installations requiring low DC resistance (0.1 ohm).
35F0121-0SR-10
Steward
DATA LINE FILTER; Construction: Chip Bead; Maximum DC Resistance: .0007 ohm; Maximum Frequency: 10 MHz; Material: Ferrite; Rated Current: 10 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ECMF02-2AMX6
STMicroelectronics ECMF02-2AMX6 is a DATA LINE FILTER with 2 functions and 6 terminals. It has approvals from UL and IEC, operates b/w -40 to 85°C, with max DC resistance of 2.5 ohm. This surface mount filter is compact at L1.75xB1.55xH0.55 mm, ideal for data line filtering applications.
ECMF02-4CMX8
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
ECMF4-20A42N10
ECMF4-20A42N10 by STMicroelectronics is a data line filter with 4 functions and 10 terminals. It operates in temperatures ranging from -55°C to 125°C and has dimensions of 2.25mm x 1.4mm x 0.5mm. It is commonly used for IEC-approved applications requiring surface mounting type.
ECMF06-6HSM16
DATA LINE FILTER; Length: 4.1 mm; Minimum Operating Temperature: -40 Cel; Packing Method: TR; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT;
ECMF02-2HSMX6
STMicroelectronics ECMF02-2HSMX6 is a 2-function data line filter with 6 terminals. It has a max operating temperature of 125°C and DC resistance of 9 ohm. Ideal for applications requiring UL and IEC approvals, it is a surface mount filter with dimensions of 1.4mm x 1.65mm x 0.55mm, rated at 0.1A current.
ECMF4-2450A17M10
DATA LINE FILTER; Minimum Operating Temperature: -40 Cel; No. of Functions: 4; No. of Terminals: 10; Width (mm): 1.4; Height: .55 mm;
ECMF2-40A100N6
DATA LINE FILTER; Height: .5 mm; Terminal Finish: NICKEL PALLADIUM GOLD; Approvals (V): IEC; No. of Functions: 2; Packing Method: TR;
ECMF04-4HSWM10
DATA LINE FILTER; Maximum Operating Temperature: 125 Cel; Approvals (V): IEC; UL; Length: 2.65 mm; No. of Functions: 4; Height: .55 mm;
ECMF02-2BF3
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; No. of Terminals: 5; Length: 1.23 mm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH;
ECMF02-3F3
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Packing Method: TAPE AND REEL; JESD-609 Code: e1; Dimensions: L1.33XB0.83XH0.5 (mm)/L0.052XB0.033XH0.02 (inch); Height: .5 mm;
ECMF02-3HSM6
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 1.65 mm;
ECMF04-4AMX12
DATA LINE FILTER; Maximum DC Resistance: 2.5 ohm; Mounting Type: SURFACE MOUNT; Height: .6 mm; Dimensions: L3.35XB1.55XH0.6 (mm)/L0.132XB0.061XH0.024 (inch); Maximum Operating Temperature: 85 Cel;
ECMF04-4HSM10
STMicroelectronics ECMF04-4HSM10 is a DATA LINE FILTER with 4 functions, rated at 0.1A. It operates b/w -40 to 85°C and has dimensions of L2.65xB1.4xH0.55 mm. Ideal for surface mount applications in data line filtering.
ECMF04-4HSM10Y
DATA LINE FILTER; No. of Functions: 4; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Length: 2.65 mm; Screening Level: AEC-Q101;
ECMF04-4HSWM10Y
DATA LINE FILTER; Length: 2.65 mm; Height: .8 mm; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel; Approvals (V): IEC; UL;
ECMF2-0730V12M12
DATA LINE FILTER; No. of Functions: 2; Packing Method: TR; Length: 2.65 mm; Height: .55 mm; Mounting Type: SURFACE MOUNT;
ECMF4-2450A60N10
STMicroelectronics ECMF4-2450A60N10 is a 4-function data line filter with 10 terminals. It operates b/w -55°C to 125°C, suitable for IEC-approved applications. With dimensions of 1.4mm x 2.25mm x 0.5mm, it's designed for surface mount installation in various electronic devices.
ECMF4-2459A6M10Y
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Length: 2.65 mm; No. of Functions: 4; Approvals (V): IEC; UL; Packing Method: TR, 7 INCH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved