Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics ECMF06-6HSM16 is a data line filter with 6 functions and 16 terminals. It operates b/w -40°C to 85°C, suitable for IEC and UL approvals. With dimensions of 1.35mm x 4.1mm x 0.55mm, it is ideal for surface mount applications in various electronic devices.
Median Price
$0.198
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Chip Stock
Digiode
Anansix
Argo Parts USA
$0.192
Continental Prestige Electronics
$0.194
Corohmni
Semicontronic
$0.400
$0.390
$0.388
IDEA Electronic Components Group
$1.076
$0.969
Aztec Data Supply Inc.
$2.000
MKK Technologies
$2.024
DigiPath Technology Company
Ampacity Inc.
$4.400
AZTECH Wire
$9.425
Parana Technologies
$1.287
Corphita
Netroflash
$0.188
$0.184
Having both IEC and UL approvals ensures the product meets international safety and performance standards.
With 6 functions, this data line filter can effectively reduce interference and noise in data transmissions.
The 16 terminals provide a secure and stable connection for efficient filtering of data signals.
Specifically designed for data line filtering, ensuring optimal performance in filtering out unwanted signals.
Capable of operating at high temperatures, making it suitable for a wide range of environments and applications.
Capable of operating in cold temperatures, ensuring reliability in various conditions.
Compact and slim design allows for easy integration into existing systems or circuit boards.
Optimal length for efficient filtering while maintaining a small footprint in the overall design.
Tray packing method ensures safe and organized storage and transportation of the product.
Surface mount design allows for easy and secure installation on circuit boards or devices.
Low-profile height enables the data line filter to be used in applications with limited space.
Data Line Filters ECMF06-6HSM16 attributes and parameters. Explore more Data Line Filters devices from STMicroelectronics
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Width (mm):
ECMF06-6HSM16 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Dev OBS 27/Mar/2019
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Sensitron Semiconductor
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Renesas Electronics
Excel (Suzhou) Semiconductor
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NZF220DFT1G
NZF220DFT1G by Onsemi is a Data Line Filter with 2 functions and 5 terminals. Featuring FERRITE CHIP filter type, it has a width of 1.35mm and max DC resistance of 110 ohm. Ideal for applications requiring a compact surface mount solution with an output impedance of 50 OHM.
742792663
Wuerth Elektronik & Kg
Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
74279263
Wurth Elektronik 74279263 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and a max frequency of 350 MHz, it offers an output impedance of 220 ohm and can handle up to 1A rated current. Ideal for surface mount installations in electronic devices requiring noise suppression on data lines.
HZ1206E601R-10
Laird Technologies
Laird Technologies' HZ1206E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers an output impedance of 600 OHM and a max frequency of 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a DC resistance of 0.3 ohm and rated current of 0.5 A.
ACM2012D-900-2P-T00
TDK
TDK's ACM2012D-900-2P-T00 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 20V rated voltage, and 0.3A rated current. Ideal for data line applications due to its compact dimensions of L2.0xB1.2xH1.2 (mm) and surface mounting type.
DLW31SN222SQ2L
Murata Manufacturing
Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.
HI1206T161R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .018 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
AWCU00453228201XTE
Yageo AWCU00453228201XTE is a Data Line Filter with 2 functions, AEC-Q200 screening. Features 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and -40 to 125 °C Operating Temp. Ideal for automotive applications requiring noise suppression in data lines.
744822222
Wurth Elektronik 744822222 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 2200uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.07 ohm. Ideal for applications requiring noise suppression in data lines.
MI0805K400R-10
MI0805K400R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 40 OHM. Ideal for surface mount applications in various electronic devices requiring noise suppression and signal filtering capabilities.
BLM21PG600SN1B
Murata Manufacturing's BLM21PG600SN1B is an 0805 chip bead data line filter with 2 terminals. Featuring a ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a DC resistance of 0.025 ohm and output impedance of 60 ohm, suitable for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz with a rated current of 3A.
74270032
Wurth Elektronik 74270032 is a FERRITE BEAD Data Line Filter with 255 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with dimensions of D11.5xH25.0 mm. Ideal for noise suppression in electronic circuits and signal filtering applications.
DLP11TB800UL2L
Murata Manufacturing's DLP11TB800UL2L is a Data Line Filter with 2 functions, rated at 5V. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring filtering in data lines with dimensions of L1.25xB1.0xH0.3mm.
74279265
Wurth Elektronik 74279265 is a 0603 multi-layer FERRITE CHIP filter with dimensions of L1.6xB0.8xH0.8 mm. It has a max operating temp of 125°C, min freq of 100 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mounting type and ferrite material construction.
742792662
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
MMZ2012Y102BT000
MMZ2012Y102BT000 by TDK is a chip bead data line filter with 2 terminals, rated current of 0.5A, and max DC resistance of 0.3 ohm. It is used for filtering in electronic circuits due to its ferrite construction and output impedance of 1000 ohm. Operating temperatures range from -55 to 125 °C.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BKP1608HS101-T
Taiyo Yuden
BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.
SRF4532-101Y
Bourns
Bourns SRF4532-101Y is a Data Line Filter with 100uH inductance, 10 Mohm insulation resistance, and rated voltage of 50V. Ideal for applications requiring noise suppression in data lines, it operates b/w -40°C to 125°C and has a max DC resistance of 8.9 ohm.
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ECMF02-2AMX6
STMicroelectronics ECMF02-2AMX6 is a DATA LINE FILTER with 2 functions and 6 terminals. It has approvals from UL and IEC, operates b/w -40 to 85°C, with max DC resistance of 2.5 ohm. This surface mount filter is compact at L1.75xB1.55xH0.55 mm, ideal for data line filtering applications.
ECMF02-4CMX8
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
ECMF4-20A42N10
ECMF4-20A42N10 by STMicroelectronics is a data line filter with 4 functions and 10 terminals. It operates in temperatures ranging from -55°C to 125°C and has dimensions of 2.25mm x 1.4mm x 0.5mm. It is commonly used for IEC-approved applications requiring surface mounting type.
ECMF02-2HSMX6
STMicroelectronics ECMF02-2HSMX6 is a 2-function data line filter with 6 terminals. It has a max operating temperature of 125°C and DC resistance of 9 ohm. Ideal for applications requiring UL and IEC approvals, it is a surface mount filter with dimensions of 1.4mm x 1.65mm x 0.55mm, rated at 0.1A current.
ECMF4-2450A17M10
DATA LINE FILTER; Minimum Operating Temperature: -40 Cel; No. of Functions: 4; No. of Terminals: 10; Width (mm): 1.4; Height: .55 mm;
ECMF2-40A100N6
DATA LINE FILTER; Height: .5 mm; Terminal Finish: NICKEL PALLADIUM GOLD; Approvals (V): IEC; No. of Functions: 2; Packing Method: TR;
ECMF04-4HSWM10
DATA LINE FILTER; Maximum Operating Temperature: 125 Cel; Approvals (V): IEC; UL; Length: 2.65 mm; No. of Functions: 4; Height: .55 mm;
ECMF02-2BF3
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; No. of Terminals: 5; Length: 1.23 mm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH;
ECMF02-3F3
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Packing Method: TAPE AND REEL; JESD-609 Code: e1; Dimensions: L1.33XB0.83XH0.5 (mm)/L0.052XB0.033XH0.02 (inch); Height: .5 mm;
ECMF02-3HSM6
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 1.65 mm;
ECMF04-4AMX12
DATA LINE FILTER; Maximum DC Resistance: 2.5 ohm; Mounting Type: SURFACE MOUNT; Height: .6 mm; Dimensions: L3.35XB1.55XH0.6 (mm)/L0.132XB0.061XH0.024 (inch); Maximum Operating Temperature: 85 Cel;
ECMF04-4HSM10
STMicroelectronics ECMF04-4HSM10 is a DATA LINE FILTER with 4 functions, rated at 0.1A. It operates b/w -40 to 85°C and has dimensions of L2.65xB1.4xH0.55 mm. Ideal for surface mount applications in data line filtering.
ECMF04-4HSM10Y
DATA LINE FILTER; No. of Functions: 4; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Length: 2.65 mm; Screening Level: AEC-Q101;
ECMF04-4HSWM10Y
DATA LINE FILTER; Length: 2.65 mm; Height: .8 mm; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel; Approvals (V): IEC; UL;
ECMF2-0730V12M12
DATA LINE FILTER; No. of Functions: 2; Packing Method: TR; Length: 2.65 mm; Height: .55 mm; Mounting Type: SURFACE MOUNT;
ECMF4-2450A60N10
STMicroelectronics ECMF4-2450A60N10 is a 4-function data line filter with 10 terminals. It operates b/w -55°C to 125°C, suitable for IEC-approved applications. With dimensions of 1.4mm x 2.25mm x 0.5mm, it's designed for surface mount installation in various electronic devices.
ECMF4-2459A6M10Y
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Length: 2.65 mm; No. of Functions: 4; Approvals (V): IEC; UL; Packing Method: TR, 7 INCH;
ECMF4-40A100N10
DATA LINE FILTER; Minimum Operating Temperature: -55 Cel; Width (mm): 1.4; Approvals (V): IEC; Height: .5 mm; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved