Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.950
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.541
1k+ parts
$0.470
10k+ parts
-
Adafruit Industries
$13.761
$13.073
Verical
$0.794
Avnet
TME
$0.601
$0.477
$0.432
$0.413
Bristol Electronics
$0.931
$0.344
$0.242
Ozdisan Elektronik
$1.001
IBS Electronics
$1.227
$0.463
Nova Conductors
$1.351
Vyrian
Chip Stock
NAC Semi
$0.613
Micros sp.j. W. Kędra i J. Lic
$0.316
Micros
$0.323
Sensible Micro Corp
Partservice
$0.312
Rutronik
$0.529
Dan-Mar Components
ComSIT Distribution GmbH
ComSIT USA
SOS electronic
$0.174
$0.165
$0.159
A&K Electronics
Rotakorn
Cyclops Electronics Ltd
Mil-Aero Solutions, Inc.
Component Stockers USA
$0.220
$0.170
$0.120
Argo Parts USA
Continental Prestige Electronics
$1.324
Netroflash
$1.283
$1.256
Vigor
$2.250
Microchip USA
$3.171
Aztec Data Supply Inc.
$8.184
Advanced Electronics
GreenTree Electronics
iodParts Technologies Inc.
$0.203
Perfect Parts
Metaverse IC Inc.
RC Electronics
$1.380
$1.260
$1.220
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Futuretech Components
Technoshack Inc. (Excess)
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Glotronic Ltd.
S.R.D Solutions
Robosynatics
$0.933
Lucentia Tech
ChipstoGo Electronic ltd
Line Drivers & Receivers SP3485EN-L/TR attributes and parameters. Explore more Line Drivers & Receivers devices from Sipex
Additional Features:
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
SP3485EN-L/TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
NE555/D
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LTC2858HMS-1#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ST1480ABDR
ST1480ABDR by STMicroelectronics is a Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has a max supply current of 2.2mA, and offers differential output. Ideal for industrial applications requiring fast data transmission with low power consumption.
DS89C21TM/NOPB
Texas Instruments
DS89C21TM/NOPB by Texas Instruments is a Line Transceiver with 5V supply, 10ns max transmit delay, and 30ns max receive delay. Ideal for industrial applications requiring differential output and EIA-422-A interface standard compliance.
MAX3221CAE+
Analog Devices
Analog Devices' MAX3221CAE+ is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features a CMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for applications requiring inverted output polarity and 3-state output characteristics in commercial temperature grades.
MAX3232EUE+T
MAX3232EUE+T by Analog Devices is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature range of -40 to 85°C, and EIA-232/EIA-562 interface standard. It features Schmitt trigger input characteristics, dual terminal position, and Gull Wing terminal form. Ideal for industrial applications requiring reliable communication over short distances.
SN65C1168EPWR
SN65C1168EPWR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features EIA-422-B, TIA-422-B, V.11 interface standard and differential output for industrial applications. With a max supply voltage of 5.5V and transmit delay of 16ns, it offers reliable performance in various communication systems.
MAX3232EUE
Maxim Integrated
MAX3232EUE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features EIA-232 and EIA-562 interface standards, SCHMITT TRIGGER input characteristics, and GULL WING terminal form. Ideal for industrial applications requiring reliable communication over long distances.
SP3072EEN-L
Exar
Exar SP3072EEN-L is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1A max output low current and 1500ns transmit delay. Ideal for industrial applications requiring reliable differential signal transmission in harsh environments.
MAX3232ESE
MAX3232ESE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature of -40 to 85 °C. It has EIA-232 and EIA-562 interface standards, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable communication over long distances.
LTC2855HDE#PBF
LTC2855HDE#PBF by Analog Devices is an EIA-485-A/TIA-485-A line transceiver with differential output and Schmitt trigger input characteristics. It operates in automotive-grade temperatures (-40 to 125 °C) with a supply voltage range of 3V to 3.6V. Ideal for applications requiring fast data transmission, it offers a max transmit delay of 50ns and receive delay of 70ns.
AD2428WCCSZ01
AD2428WCCSZ01 by Analog Devices is a Line Transceiver with DMOS technology. It operates at -40 to 105°C, with a supply voltage range of 1.7-1.98V and output current up to 1.5A. Ideal for industrial applications requiring open-drain output characteristics in a compact chip carrier package.
MAX232AESE+
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX232AEWE
MAX232AEWE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E interfaces for communication applications.
LTC2870HUFD#PBF
LTC2870HUFD#PBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 125 °C. It features a max supply voltage of 5.5 V, max transmit delay of 70 ns, and differential output for EIA-232, EIA-422, EIA-485 interfaces. Ideal for automotive applications due to its technology and terminal finish in Matte Tin (Sn).
MAX3221EIPWR
MAX3221EIPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 3.6V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its Schmitt trigger input characteristics and inverted output polarity.
THVD1500DR
THVD1500DR by Texas Instruments is a line driver & receiver with 8 terminals, operating at -40 to 125 °C. It has a max supply voltage of 5.5 V and differential output for EIA-422; EIA-485 interfaces. Ideal for automotive applications due to its small outline package and low supply current of 0.66 mA.
ST485BDR
ST485BDR by STMicroelectronics is a Line Driver & Receiver with 5V supply, 60ns max transmit delay, and EIA-422/EIA-485 interface. Ideal for industrial applications, it operates b/w -40 to 85°C and features a small outline package with dual terminals for surface mount assembly.
MAX3232EIPWRE4
MAX3232EIPWRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F, TIA-232-F, V.28 interface standards. Ideal for industrial applications requiring reliable data transmission over long distances.
ICL3221EIAZ-T
Renesas Electronics
Renesas Electronics' ICL3221EIAZ-T is a CMOS line transceiver with 16 terminals, operating b/w -40 to 85°C. It supports EIA-232, TIA-232, V.24, and V.28 interfaces with Schmitt trigger input characteristics. Ideal for industrial applications requiring a small outline package with dual terminal position and matte tin finish.
MAX22025AWA+
LINE TRANSCEIVER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP3485EN-L/TR
Exar SP3485EN-L/TR is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for industrial applications requiring reliable communication over short distances.
Maxlinear
SP3485EN-L
Sipex
Exar's SP3485EN-L is a BICMOS line transceiver with EIA-422/EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it is ideal for industrial applications requiring reliable communication over short distances.
SP3485CN-L/TR
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SP3485CN-L
SP3490EN-L/TR
SP3491EN-L/TR
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SP3490EN-L
SP3485EP-L
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved