Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
Other Function Interface ICs SI8710AC-ASR attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
SI8710AC-ASR Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Brightking
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Fagor Electronica S Coop
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Eic Semiconductor
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Bourns
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ADUM5240ARZ
ADUM5240ARZ by Analog Devices is an 8-terminal interface IC with a supply voltage range of 4.5V to 5.5V, operating temperature from -40°C to 105°C. It is used in industrial applications requiring small outline surface-mount packages for signal isolation and data communication.
NCV7240BDPR2G
NCV7240BDPR2G by Onsemi is a 24-terminal interface IC with a supply voltage of 3.3V, suitable for automotive applications due to AEC-Q100 screening. It features a small outline package style, gull wing terminal form, and nickel palladium gold finish, making it ideal for surface mount designs in compact spaces.
6ES7131-6BH01-0BA0
Siemens
Digital I/P Module;
NCP1094MNRG
NCP1094MNRG by Onsemi is a small outline, heat sink interface IC with 10 terminals. It operates b/w -40 to 85°C and supports a max supply voltage of 57V. Ideal for industrial applications requiring very thin profile components.
ADUM5401ARWZ-RL
ADUM5401ARWZ-RL by Analog Devices is a 16-terminal IC with supply voltage range of 3V to 5.5V, operating temperature from -40°C to 105°C. It is used as an interface circuit in industrial applications due to its small outline package and dual terminal position.
ISO6721RBQDRQ1
ISO6721RBQDRQ1 by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -40 to 125 °C, with supply voltage range of 1.71V to 5.5V. Suitable for automotive applications due to AEC-Q100 screening and small outline package style.
SI8602AC-B-IS
Silicon Labs
SI8602AC-B-IS by Silicon Labs is an interface IC with 1 function, operating at a voltage range of 3-5.5V. It is suitable for automotive applications and has a small outline package style with dimensions of 4.9mm x 3.9mm.
TXS0108EPWR
TXS0108EPWR by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1.2-3.6V, ideal for industrial applications. It features a small outline package with dual terminals and operates b/w -40 to 85°C. With a low supply current of 0.008mA, it offers 3-state output characteristics for versatile usage in various electronic systems.
ADUM2402BRWZ
ADUM2402BRWZ by Analog Devices is a 16-terminal IC with supply voltage range of 2.7V to 5.5V, operating temperature from -40°C to 105°C. It features CMOS technology and matte tin terminal finish, suitable for industrial applications requiring small outline interface circuits in surface mount packages.
FXMA2102L8X
Fairchild Semiconductor
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE;
MAX3869EHJ+
MAX3869EHJ+ by Analog Devices is a 32-terminal interface IC with a supply voltage range of 3.14V to 5.5V. It operates in industrial temperatures from -40°C to 85°C, making it suitable for various applications requiring high-performance signal processing and control functions. The package style includes flatpack, heat sink/slug, thin profile, and fine pitch options for versatile integration in electronic systems.
ISOW7841DWER
ISOW7841DWER by Texas Instruments is a digital isolator with 4 channels, operating at a supply voltage range of 3V to 5.5V. It features a small outline package style, dual terminal position, and automotive temperature grade suitability. This IC is ideal for applications requiring high isolation levels in harsh environments.
SI8662BC-B-IS1R
SI8662BC-B-IS1R by Silicon Labs is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features a small outline package style, CMOS technology, and dual terminal position suitable for high-temperature environments up to 125°C.
ISO7220CD
ISO7220CD by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 2.8V to 5V and small outline package style, it offers reliable performance in various electronic systems.
ISO7141CCDBQR
ISO7141CCDBQR by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -40 to 125°C. It has a supply voltage range of 2.7V to 5V and is ideal for automotive applications due to its small outline package and dual terminal position. With gull wing terminals and nickel palladium gold finish, it offers reliable interface circuitry in compact dimensions.
TXB0108NMER
TXB0108NMER by Texas Instruments is an 8-bit interface IC with 3-STATE output. It operates b/w -40 to 85°C, with a supply voltage range of 1.2V to 3.6V. This industrial-grade IC in a rectangular package is ideal for applications requiring fine pitch and low power consumption.
SN6505DQDBVTQ1
SN6505DQDBVTQ1 by Texas Instruments is a small outline, low profile interface IC with 6 terminals and 1.5A output current. Operating b/w -40 to 125°C, it's AEC-Q100 compliant for automotive applications. With a supply voltage range of 2.25V to 5.5V, it's ideal for various function interface requirements in automotive electronics.
ADUM1200CRZ
ADUM1200CRZ by Analog Devices is an Interface IC with 2 functions, operating at a supply voltage range of 2.7V to 5.5V. It has a small outline package style and can withstand industrial temperature grades from -40°C to 105°C. Ideal for applications requiring reliable signal isolation in harsh environments.
XISO6741FDWR
XISO6741FDWR by Texas Instruments is a digital isolator with 4 functions, operating at temperatures from -40 to 125°C. It has a supply voltage range of 1.71V to 5.5V and comes in a small outline package suitable for automotive applications. With CMOS technology and gull wing terminals, it offers reliable isolation for up to 4 channels.
ISO7720FQDQ1
ISO7720FQDQ1 by Texas Instruments is a CMOS digital isolator with 2 channels, AEC-Q100 screening for automotive applications. It operates b/w -40 to 125 °C with supply voltage range of 2.25-5.5 V, featuring small outline package style and dual terminal position.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved