Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$5.335
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$2.782
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$3.840
Mouser Electronics
$6.830
$3.400
$3.020
DigiKey
$7.360
$3.913
$3.025
Verical
Digiode
$2.612
Vyrian
$2.750
Bristol Electronics
$5.508
$2.589
Flip Electronics
Dan-Mar Components
Corphita
$2.475
Advanced Electronics
$16.493
$15.009
$13.524
Peripheral Drivers SI82397AD-IS attributes and parameters. Explore more Peripheral Drivers devices from Silicon Labs
Built-in Protections:
Interface IC Type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
SI82397AD-IS Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Onsemi
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
NE555D
Transys Electronics
MIC2026-2YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TPS22919DCKR
Texas Instruments
TPS22919DCKR by Texas Instruments is a 6-terminal peripheral driver with built-in protections for transient, over current, and thermal issues. It has a max output peak current limit of 3A and operates in industrial temperature grade range (-40 to 105°C). This buffer/inverter-based driver is ideal for applications requiring sink output current flow direction.
VNP5N07-E
STMicroelectronics
VNP5N07-E by STMicroelectronics is a 3-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It has a turn-on time of 0.25 us and nominal output peak current limit of 5 A. This BUFFER OR INVERTER BASED IC is used in applications requiring sink output current flow direction.
MDC3105DMT1G
MDC3105DMT1G by Onsemi is a peripheral driver with 6 terminals, operating at -40 to 85°C. It has a max output current of 0.25A and built-in transient protection, suitable for industrial applications requiring a 5V supply voltage and sink output current flow direction.
VN808TR-E
STMicroelectronics' VN808TR-E is a peripheral driver with 8 functions, max supply voltage of 45V, and built-in protections. It is used as a buffer or inverter based peripheral driver for applications requiring a max output current of 0.5A and turn-on time of 100us.
TPS27082LDDCR
TPS27082LDDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V and a max output current of 3A. It is commonly used in automotive applications for its built-in transient protection and open-drain output characteristics.
MAX14913AKN+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
LMD18200T/LF14
LMD18200T/LF14 by Texas Instruments is a peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under voltage. It has a max output current of 6A and operates in automotive temperature grades. This HB-based peripheral driver with PWM is ideal for applications requiring high current sourcing and sinking capabilities.
FAN7388MX
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
TLE8444SLXUMA1
Infineon Technologies
TLE8444SLXUMA1 by Infineon Technologies is a half bridge based peripheral driver with a nominal output peak current limit of 2.4A. It features source and sink output current flow direction, making it suitable for applications requiring precise control of power delivery. This small outline package with 24 terminals is designed for surface mount assembly in various electronic systems.
IRS21850SPBF
International Rectifier
IRS2103PBF
IRS2103PBF by Infineon is a CMOS half-bridge peripheral driver with 15V nominal voltage. It offers built-in transient and under-voltage protections, operates b/w -40 to 125 °C, and has a turn-on time of 0.82 us. Widely used in automotive applications due to its compact IN-LINE package style and source/sink output current flow direction.
LM3525MX-H/NOPB
National Semiconductor
VN5E160MSTR-E
STMicroelectronics' VN5E160MSTR-E is a peripheral driver with 8-28V power supplies, 1A max output current, and built-in protections. Ideal for applications requiring buffer or inverter-based interface ICs, it offers sink output current flow direction and operates at supply voltages ranging from 4.5V to 28V.
VN751PT13TR
VN751PT13TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive applications, offering a nominal output peak current limit of 2.5A. With a small outline package style and gull wing terminal form, it is suitable for surface mount installations in various electronic systems.
MIC5842YN
MIC5842YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.
BTS621L1E3128ABUMA1
BTS621L1E3128ABUMA1 by Infineon is a MOS peripheral driver with 6 terminals, AEC-Q100 screening, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 34V and has a nominal output peak current limit of 4.4A. Ideal for automotive applications requiring sink output current flow direction in a compact small outline package style.
IRS2011SPBF
IRS2011SPBF by Infineon Technologies is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V, and built-in transient and under-voltage protections. It is designed for automotive applications, featuring a CMOS technology, small outline package style, and sink output current flow direction.
BTS3134N
BTS3134N by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It operates at a nominal voltage of 12V and has a max output peak current limit of 24A. This driver is commonly used as a buffer or inverter based peripheral driver in various applications.
TPS25221DBVR
TPS25221DBVR by Texas Instruments is a small outline, low profile peripheral driver with thermal protection. It operates in automotive temperature grades from -40 to 125°C. With turn-on time of 3000us and turn-off time of 700us, it's ideal for buffer or inverter based applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved