Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROCONTROLLER, RISC; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; No. of I/O Lines: 25;
Median Price
$5.386
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Arrow
1+ parts
$5.353
100+ parts
1k+ parts
10k+ parts
$4.544
Chip1Stop
$5.420
-
Digiode
$5.085
Vyrian
Flip Electronics
Ampacity Inc.
$4.550
Corphita
$4.818
Microcontrollers EZR32HG320F64R67G-C0 attributes and parameters. Explore more Microcontrollers devices from Silicon Labs
ADC Channels:
Address Bus Width:
Bit Size:
Boundary Scan:
CPU Family:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
Format:
Integrated Cache:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
Moisture Sensitivity Level (MSL):
No. of External Interrupts:
No. of I/O Lines:
No. of Serial I/Os:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
On Chip Program ROM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
RAM Bytes:
ROM Words:
ROM Programmability:
Maximum Seated Height:
Speed:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
Data EEPROM Size:
Connectivity:
Peripherals:
Analog To Digital Convertors:
Digital To Analog Convertors:
EZR32HG320F64R67G-C0 Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1554216004
Molex
WIRE AND CABLE;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
AT91SAM9G20B-CU
Microchip Technology
Microchip AT91SAM9G20B-CU is a 32-bit ARM9 microcontroller with 26-bit address bus and 8-bit data RAM. It features 217 terminals, operates at up to 50 MHz, and offers various peripherals like DMA, PWM, RTC. Ideal for industrial applications requiring low power consumption and high-speed processing.
MK60DN512VLL10
NXP Semiconductors
NXP Semiconductors' MK60DN512VLL10 is a 32-bit microcontroller with 1.8/3.3 V power supplies, featuring a Cortex-M4 CPU and 131072 bytes of RAM. It offers 33-Ch 16-Bit ADC channels, CAN(2), I2C(2), SPI(3), UART(5) connectivity, and operates at a max clock frequency of 32 MHz. Ideal for industrial applications requiring high-speed processing and multiple communication interfaces.
STM8S003F3U6TR
STMicroelectronics
STM8S003F3U6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-Ch 10-Bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
MSP430F5438AIPZR
MSP430F5438AIPZR by Texas Instruments is a 16-bit microcontroller with 262144 ROM words, 16 RAM words, and 16-Ch 12-Bit ADC channels. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities. Features include BOD, CRC, DMA(3), RTC, TIMER(15), WDT peripherals for versatile connectivity options.
ATMEGA88A-AUR
ATMEGA88A-AUR by Microchip: 8-bit RISC CPU, 20 MHz clock, 5.5 V max supply. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Contains 1024 RAM bytes, 512 EEPROM size, and peripherals like BOD and PWM(6).
PIC32MZ2048EFG100-I/PT
PIC32MZ2048EFG100-I/PT by Microchip: 32-bit microcontroller with 64MHz clock, 40 ADC channels, and 10 timers. Ideal for industrial applications requiring high-speed processing, extensive connectivity options, and low power consumption. Features include 524288 RAM bytes, FLASH ROM programmability, and boundary scan support.
STM32F746ZET6
STM32F746ZET6 by STMicroelectronics is a 32-bit microcontroller with 144 terminals, 114 I/O lines, and ADC/DMA channels. Operating at 216 rpm with a clock frequency of 26 MHz, it has an address bus width of 24 bits and external data bus width of 8 bits. Ideal for applications requiring high-speed processing and extensive I/O capabilities in a compact form factor.
ATMEGA644P-20AUR
ATMEGA644P-20AUR by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 20 MHz. It features 32 I/O lines, 4096 bytes of RAM, and 2048 bytes of data EEPROM. Ideal for industrial applications requiring low power consumption and connectivity via SPI, TWI, and USART interfaces.
MSP430G2553IPW20R
MSP430G2553IPW20R by Texas Instruments is a 16-bit microcontroller with 8KB ROM and 512B RAM. It operates at a max frequency of 16MHz, suitable for industrial applications requiring low power consumption. Features include 8 ADC channels, 2 timers, and connectivity options like I2C, SPI, UART.
STM32F437VIT6
STM32F437VIT6 by STMicroelectronics is a 32-bit microcontroller with 262144 bytes of RAM and 2097152 ROM words. It operates at a max clock frequency of 50 MHz, suitable for industrial applications requiring CAN, ETHERNET, USB connectivity. With ADC and DAC channels, it offers versatile analog-to-digital conversion capabilities.
STM32F103CBT6
STM32F103CBT6 by STMicroelectronics is a 32-bit microcontroller with 131072 ROM words and 20480 RAM bytes. It operates at a max clock frequency of 16 MHz, suitable for industrial applications requiring CAN, I2C, SPI, USART, and USB connectivity. With 10-Ch 12-Bit ADC channels and DMA support, it offers versatile peripheral options for efficient data processing.
ATXMEGA256A3-AUR
ATXMEGA256A3-AUR by Microchip Technology is a 16-bit microcontroller with 131072 ROM words and 16384 RAM bytes. It features 16-Ch 12-Bit ADC channels, 2-Ch 12-Bit DAC channels, and connectivity options like SPI(3), TWI(2), USART(7). Ideal for industrial applications requiring low power mode, it operates b/w -40 to +85 °C with a max clock frequency of 16 MHz.
STM32F756IGT6
STM32F756IGT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, 140 I/O lines, and 26 MHz clock frequency. It features ADC and DMA channels, suitable for applications requiring high-speed data processing and control systems. With a low profile flatpack package style, it is ideal for compact electronic designs.
ATTINY13A-SSUR
ATTINY13A-SSUR by Microchip: 8-bit RISC CPU, 512 ROM words, 64B RAM. Ideal for industrial applications with 20MHz clock speed, 4-Ch ADCs, and low power mode. Package style: small outline, suitable for surface mount assembly.
ATTINY2313-20SU
ATTINY2313-20SU by Microchip: 8-bit RISC CPU, 128B EEPROM, 128B RAM, 1024 ROM words. Ideal for industrial applications with SPI and USART connectivity, PWM support, low power mode, and operating temperature range of -40 to 85°C. Package style: small outline rectangular shape with dual terminals.
ATMEGA644PA-AUR
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
ATMEGA8535-16AU
ATMEGA8535-16AU by Microchip: 8-bit RISC CPU, 512B EEPROM, 512B RAM, 4096 ROM words. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Operates at max 16MHz clock frequency in -40 to 85°C temperature range.
STM32F373C8T6
STM32F373C8T6 by STMicroelectronics is a 32-bit microcontroller with 3.6V max supply voltage, -40 to 85°C operating temp, and 36 I/O lines. It features 9-Ch ADC, 3-Ch DAC, and 75.7mA max supply current. Ideal for industrial applications requiring high-speed processing and connectivity via CAN, HDMI-CEC, USB, and more.
ATMEGA328P-AN
ATMEGA328P-AN by Microchip: 8-bit RISC CPU, 20 MHz clock, 2/5 V supply. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Contains BOD, comparator, POR, PWM(6), timer(3), WDT peripherals for versatile use.
STM32F429VIT6
STM32F429VIT6 by STMicroelectronics is a 32-bit microcontroller with 262144 RAM bytes, 2097152 ROM words, and 16-Ch 12-Bit ADC channels. Ideal for industrial applications, it offers connectivity options like CAN(2), ETHERNET, and USB along with peripherals such as BOD and RTC. Operating at a max clock frequency of 50 MHz, this Cortex-M4F CPU family chip supports up to 17 timers and DMA channels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved