Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs C8051F393-A-GM microcontroller operates at 50 MHz with 16384 ROM words and 1024 RAM bytes. It features peripherals like RTC, UART, and SPI for applications in embedded systems requiring high-speed processing and connectivity.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Ampacity Inc.
$3.000
AZTECH Wire
$21.440
Microchip USA
$26.780
Corohmni
$51.506
Advanced Electronics
$63.218
Argo Parts USA
Corphita
Continental Prestige Electronics
Robosynatics
Lucentia Tech
$13.184
$12.208
Aranea Global
Surface mount capability allows for easy and efficient PCB assembly, saving time and effort during manufacturing.
Higher maximum supply voltage tolerance provides flexibility in power supply options and compatibility with a wide range of applications.
Square package shape helps in optimizing board space, allowing for efficient layout and compact design.
Having 20 terminals provides ample connectivity for various peripherals and interfaces, enhancing the versatility of the microcontroller.
These package styles offer good thermal management and efficient heat dissipation, ensuring stable performance even under high temperature conditions.
Low minimum supply voltage requirement enables energy-efficient operation and extends battery life in power-constrained applications.
High maximum operating temperature tolerance ensures reliable performance in harsh environmental conditions and industrial applications.
C8051 CPU family is known for its low power consumption, high performance, and rich set of features, making it a reliable choice for various embedded applications.
Wide minimum operating temperature range allows the microcontroller to operate in extreme cold environments without compromising performance.
Matte tin terminal finish provides good solderability and corrosion resistance, ensuring robust connections and long-term reliability.
Integrated ADC channels enable analog signal processing, facilitating sensor interfacing and data acquisition in a wide range of applications.
Quad terminal position allows for easy and secure mounting on the PCB, ensuring reliable connections and mechanical stability.
Large ROM memory capacity of 16384 words accommodates complex firmware and application code, enabling feature-rich functionality and performance optimization.
Compact width dimension saves board space and enables compact product design, ideal for space-constrained applications.
Rich set of peripherals including comparator, power-on reset, real-time clock, timers, and watchdog timer enhance the microcontroller's functionality and versatility for diverse applications.
High maximum clock frequency of 50 MHz provides fast processing speed and responsiveness, suitable for real-time control and high-speed applications.
Adequate time at peak reflow temperature allows for reliable soldering and assembly, ensuring strong mechanical connections and long-term product durability.
High peak reflow temperature tolerance ensures robust solder joints and reliable assembly, suitable for lead-free and RoHS-compliant manufacturing processes.
Compact length dimension saves board space and enables compact product design, ideal for miniaturized applications and space-constrained environments.
Being a microcontroller, it offers integrated processing, memory, and I/O capabilities in a single chip, simplifying system design and reducing component count.
Generous RAM capacity of 1024 bytes allows for efficient data storage and manipulation, supporting multitasking operations and data-intensive applications.
CMOS technology offers low power consumption, high noise immunity, and improved reliability, making the microcontroller suitable for battery-powered and noise-sensitive applications.
No-lead terminal form enhances thermal performance, improves solder joint reliability, and enables RoHS compliance, ensuring eco-friendly manufacturing.
Stable nominal supply voltage simplifies power management and compatibility with standard power sources, enhancing ease of integration and overall system reliability.
Integrated PWM channels enable precise control of analog signals, supporting motor control, LED dimming, and power management applications with high accuracy.
Versatile connectivity options including SMBus, SPI, and UART allow for easy interfacing with external devices, sensors, and communication networks, enhancing system flexibility and compatibility.
Flash ROM programmability allows for easy firmware updates, code modifications, and in-system programming, enabling rapid prototyping and iterative development cycles.
Fine terminal pitch of 0.5 mm provides high-density mounting capability, enabling compact PCB layout and space-efficient product designs, ideal for miniaturized applications.
Operational speed of 50 rpm ensures fast data processing and responsiveness, suitable for real-time control, high-speed communication, and time-critical applications.
On-chip program ROM width of 8 bits allows for efficient data storage and retrieval, supporting a wide range of instructions and code execution optimization for enhanced performance.
Adequate number of I/O lines provide versatile interfacing options for sensors, actuators, peripherals, and external devices, enabling seamless integration and flexibility in system design.
Microcontrollers C8051F393-A-GM attributes and parameters. Explore more Microcontrollers devices from Silicon Labs
ADC Channels:
Address Bus Width:
CPU Family:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of I/O Lines:
No. of Terminals:
On Chip Program ROM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
RAM Bytes:
ROM Words:
ROM Programmability:
Speed:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
Data EEPROM Size:
Connectivity:
Peripherals:
C8051F393-A-GM Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - C8051F39x/37x 10/Nov/2020
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ATTINY85V-10SU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TMS320F28379DZWTS
Texas Instruments
TMS320F28379DZWTS by Texas Instruments is a 32-bit microcontroller with 3 DAC channels, 12 ADC channels, and 6 timers. Ideal for automotive applications, it operates at up to 100 MHz with low power mode support. Featuring a max supply voltage of 1.26 V and package style in grid array form.
MC68332ACEH25
Freescale Semiconductor
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 132; Package Code: BQFP; Package Shape: SQUARE;
STM32H725ZGT6
STMicroelectronics
STM32H725ZGT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 24 timers, and 28-Ch 16-Bit ADC. It features Ethernet, CAN, and USB connectivity for industrial applications requiring high-speed data processing at up to 50 MHz clock frequency. With low power mode and integrated cache, it's ideal for IoT devices needing efficient performance in a compact package.
STM32F767NIH6
STM32F767NIH6 by STMicroelectronics is a 32-bit microcontroller with 26-bit address bus width and 216 terminals. It features 2 DAC channels, 24 ADC channels, and operates at a max clock frequency of 26 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral support like CAN, Ethernet, I2C, SPI, UART, USB.
STM32F746NGH6
STM32F746NGH6 by STMicroelectronics is a 32-bit microcontroller with 216 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, suitable for industrial applications requiring high-speed processing and precision analog-to-digital conversion. With a wide temperature range from -40°C to 85°C, it is ideal for demanding environments.
STM32F030C6T6
STM32F030C6T6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M0 CPU, 48 I/O lines, and 12 ADC channels. Operating at up to 32 MHz, it offers DMA support and peripherals like RTC and timers. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
MC9S12DP512CPVER
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 112; Package Code: LQFP; Package Shape: SQUARE;
TM4C123GH6PZI7
TM4C123GH6PZI7 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family, offering 22-Ch 12-Bit ADC channels and 32 DMA channels. Ideal for industrial applications, it features a max clock frequency of 25 MHz, low power mode, and peripherals like CAN(2), I2C(6), UART(8).
STM32F405RGT6W
STM32F405RGT6W by STMicroelectronics is a 32-bit microcontroller with 64 terminals, 51 I/O lines, and 3.3V nominal voltage. It features ADC and DMA channels, suitable for applications requiring a max clock frequency of 16MHz such as industrial automation and IoT devices.
STM32F107VCT6TR
STM32F107VCT6TR by STMicroelectronics is a 32-bit microcontroller with 262144 ROM words, 65536 RAM bytes, and 16-Ch 12-Bit ADC channels. It operates at a max clock frequency of 50 MHz and features connectivity options like CAN(2), ETHERNET, I2C, SPI(3), USART(5), USB. Ideal for industrial applications requiring high-speed processing and multiple communication interfaces.
STM32L432KBU6
STM32L432KBU6 by STMicroelectronics is a 32-bit microcontroller with 131072 ROM words and 65536 RAM bytes. It features 10-Ch 12-Bit ADC channels, 2-Ch 12-Bit DAC channels, and operates at a max clock frequency of 48 MHz. Ideal for applications requiring high-speed data processing, precision analog-to-digital conversion, and versatile connectivity options such as CAN, I2C, SPI, USART, and USB.
ATTINY2313-20SUR
Microchip Technology
ATTINY2313-20SUR by Microchip: 8-bit RISC CPU, 128B EEPROM, 20MHz clock freq. Ideal for industrial applications with SPI & USART connectivity, low power mode, and Flash ROM programmability.
STM32F769NIH6
STM32F769NIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 26-bit address bus, and 544768 bytes of RAM. It features 24-Ch 12-Bit ADCs, 2-Ch 12-Bit DACs, and supports various peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and connectivity at temperatures ranging from -40 to +85 °C.
MK20DX256VLH7
NXP Semiconductors' MK20DX256VLH7 is a 32-bit microcontroller with 64 terminals, operating at up to 50 MHz. It features DAC and ADC channels, DMA support, and 65536 bytes of RAM. Ideal for industrial applications requiring a powerful Cortex-M4 CPU, this microcontroller offers versatile PWM functionality and FLASH ROM programmability.
STM32F429IIT6
STM32F429IIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 262144 bytes RAM, and 2097152 ROM words. It features 24-Ch 12-Bit ADC, 2-Ch 12-Bit DAC, and peripherals like BOD, CAMERA, DMA(2), POR. Ideal for industrial applications requiring high-speed processing up to 50 MHz with connectivity options including CAN(2), ETHERNET, I2C(3).
MK64FX512VLL12
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE;
STM32F446RCT6
STM32F446RCT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 262144 ROM words, and 131072 RAM bytes. It features 16 ADC channels, 2 DACs, and peripherals like BOD, DMA(2), LCD, RTC. Ideal for industrial applications requiring high-speed processing and connectivity via CAN(2), I2C(4), SPI(4), USB interfaces.
MSP430FR5739IRHAT
MSP430FR5739IRHAT by Texas Instruments is a 16-bit microcontroller with 1024 bytes of RAM and 16384 ROM words. It features 14-Ch 10-Bit ADC channels, 3 DMA channels, and operates at a max clock frequency of 24 MHz. Ideal for industrial applications requiring low power consumption and connectivity options like I2C, IRDA, SCI, SPI, and UART.
ATMEGA64-16AU
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C8051F120-GQR
Silicon Labs
Silicon Labs' C8051F120-GQR is an 8-bit microcontroller with 16-bit address bus, operating at up to 100 MHz. Ideal for industrial applications, it features DAC and ADC channels, flash ROM programmability, and 64 I/O lines for versatile connectivity.
C8051F340-GQR
C8051F340-GQR by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 40 I/O lines, PWM channels, and ADC channels. Ideal for industrial applications requiring high-speed processing and precise control in a compact form factor.
C8051F120-GQ
C8051F120-GQ by Silicon Labs is an 8051 microcontroller with 8-bit architecture, operating at up to 100 MHz. It features 64 I/O lines, DAC and ADC channels for versatile applications in industrial settings. With a supply voltage range of 3-3.6 V and compact dimensions (14mm x 14mm), it's suitable for various embedded systems requiring high-speed processing capabilities.
C8051F340-GQ
C8051F340-GQ by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 40 I/O lines, 4352 bytes of RAM, and PWM channels for industrial applications. With a package style of flatpack and thin profile, it operates in temperatures ranging from -40 to 85°C.
C8051F380-GQR
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
C8051F330-GM
C8051F330-GM by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 25 MHz. It features 16-Ch 10-Bit ADC channels and 1-Ch 10-Bit DAC channels, making it suitable for industrial applications requiring I2C, SPI, and UART connectivity. With a package style of CHIP CARRIER and very thin profile, this microcontroller operates in temperatures ranging from -40 to 85 °C.
C8051F040-GQ
C8051F040-GQ by Silicon Labs is an 8-bit microcontroller with 16-bit address bus, operating at up to 25 MHz. It features DAC and ADC channels, suitable for industrial applications requiring a max supply voltage of 3.6 V and temperature range from -40°C to 85°C.
C8051F342-GQ
C8051F342-GQ by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 48 MHz, suitable for industrial applications. It features 25 I/O lines, 4352 bytes of RAM, and flash ROM programmability. With a package style of flatpack and low profile, it operates within a temperature range of -40 to 85°C.
C8051F560-IQ
C8051F560-IQ by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 50 MHz, suitable for automotive applications. It features 25 I/O lines, PWM channels, and ADC channels, operating at temperatures up to 125°C. With a compact square package style and low profile design, it offers high performance in a small form factor.
C8051F330-GMR
C8051F330-GMR by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 25 MHz. It has ADC and DAC channels, making it suitable for industrial applications requiring precise analog-to-digital and digital-to-analog conversions. With a compact size of 4mm x 4mm, it is ideal for space-constrained designs.
C8051F580-IQ
MICROCONTROLLER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
C8051F580-IQR
C8051F580-IQR by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 50 MHz. It has 40 I/O lines and can operate in automotive temperature grades. This microcontroller is commonly used in applications such as automotive systems, industrial control, and consumer electronics.
C8051F300-GM
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 11; Package Code: VQCCN; Package Shape: SQUARE;
C8051F123-GQ
C8051F123-GQ by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 100 MHz. It has 32 I/O lines and can operate in industrial temperature conditions. This microcontroller is commonly used in applications that require high-speed processing and extensive input/output capabilities.
C8051F005DK
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
C8051F040-GQR
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
C8051F380-GQ
C8051F022-GQ
Silicon Labs C8051F022-GQ microcontroller features 16-bit address bus, 8-bit CPU, and 3 DAC channels. Ideal for industrial applications with a temperature range of -40 to 85°C. Package style: flatpack, thin profile, fine pitch.
C8051F130-GQR
C8051F130-GQR by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 100 MHz. It features 64 I/O lines, flash ROM programmability, and PWM channels. Ideal for industrial applications requiring a compact design and high-speed processing capabilities.
C8051F508-IM
C8051F508-IM by Silicon Labs is an 8-bit microcontroller with 40 terminals, operating at up to 30 MHz. It features 32-Ch 12-Bit ADCs and Flash ROM programmability, suitable for automotive applications requiring high-speed data processing and connectivity via SMBUS, SPI, and UART interfaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved