Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$3.800
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
TME
1+ parts
100+ parts
$2.630
1k+ parts
-
10k+ parts
Digiode
Vyrian
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Corphita
Microcontrollers C8051F304-GS attributes and parameters. Explore more Microcontrollers devices from Silicon Labs
ADC Channels:
Address Bus Width:
Bit Size:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
No. of I/O Lines:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
ROM Programmability:
Speed:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
C8051F304-GS Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Motorola
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Formosa Microsemi
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
EU2B-YS3203F
Idec
ROTARY SWITCH;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
STM32G071RBT6
MICROCONTROLLER, RISC; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
STM32F446VET6
STM32F446VET6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 524288 ROM words, and 131072 RAM bytes. It features 16-Ch 12-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like BOD, DMA(2), LCD. Ideal for industrial applications requiring high-speed processing and connectivity via CAN(2), I2C(4), SPI(4).
STM32C011J6M6
MICROCONTROLLER, RISC;
ATMEGA328PB-AUVAO
Microchip Technology
ATMEGA328PB-AUVAO by Microchip Technology is an 8-bit microcontroller with 32 terminals, operating at a max frequency of 16 MHz. It features 2048 bytes of RAM, 1024 bytes of EEPROM, and 16384 ROM words. Ideal for applications requiring low power consumption and connectivity via I2C, SPI, and USART interfaces.
STM32F437VIT6TR
STM32F437VIT6TR by STMicroelectronics is a 32-bit microcontroller with a max clock frequency of 26 MHz. It has DAC and ADC channels, as well as DMA channels for efficient data transfer. This microcontroller is commonly used in industrial applications due to its temperature grade and moisture sensitivity level.
ATMEGA32-16AUR
ATMEGA32-16AUR by Microchip: 8-bit RISC CPU, 5V supply, 16MHz clock freq. Ideal for industrial applications with SPI, TWI, USART connectivity and BOD, POR peripherals. Features 3 timers, 8 ADC channels, and low power mode for efficient performance.
STM32F769BIT6
STM32F769BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 16 DMA channels, and 24-Ch 12-Bit ADC. It has a max clock frequency of 50 MHz and operates in industrial temperature range. Ideal for applications requiring high-speed processing, multiple peripherals like CAN, I2C, SPI, USB connectivity, and low power mode support.
STM32F429VIT6
STM32F429VIT6 by STMicroelectronics is a 32-bit microcontroller with 262144 RAM bytes, 2097152 ROM words, and 16-Ch 12-Bit ADC channels. Ideal for industrial applications, it offers connectivity options like CAN(2), ETHERNET, and USB along with peripherals such as BOD and RTC. Operating at a max clock frequency of 50 MHz, this Cortex-M4F CPU family chip supports up to 17 timers and DMA channels.
STM32U575VIT6Q
MSP430F5342IRGZR
MSP430F5342IRGZR by Texas Instruments is a 16-bit microcontroller with 131072 ROM words, 10 RAM words, and 9-Ch 12-Bit ADC channels. Ideal for industrial applications requiring low power consumption, it features 3 DMA channels, 19 timers, and various peripherals like BOR and CRC.
STM32F072CBT6
STM32F072CBT6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 32 MHz. It features 12-bit DAC and ADC channels, along with various peripherals like timers, DMA, and USB connectivity. Ideal for industrial applications requiring high-speed processing and multiple I/O lines in a compact form factor.
STM32F446ZEH6
STM32F446ZEH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 144 terminals, and 131072 bytes of RAM. It operates at up to 16 MHz, has 24 ADC channels, and supports various peripherals like DMA, RTC, and timers. Ideal for industrial applications requiring high-speed processing and extensive I/O capabilities.
STM32F207IGH6
STM32F207IGH6 by STMicroelectronics is a 32-bit microcontroller with 24-bit address bus width, 176 terminals, and 131072 bytes of RAM. It features 2 DAC channels, 24 ADC channels, and operates at a max clock frequency of 26 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral support like BOD, DMA(2), RTC, and USB connectivity.
ATMEGA168PA-AUR
ATMEGA168PA-AUR by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 20 MHz. It features 8 ADC channels, 1024 RAM bytes, and 512 data EEPROM size. Ideal for industrial applications requiring low power mode, it offers SPI, TWI, and USART connectivity along with PWM channels for precise control.
STM32F427VGT6TR
STM32F427VGT6TR by STMicroelectronics is a 32-bit microcontroller with Cortex-M4 CPU, offering 16 external interrupts and 15 timers. It features 2-channel 12-bit DACs, 16-channel 12-bit ADCs, and connectivity options like CAN, I2C, SPI, UART, USB. Ideal for industrial applications requiring high-speed processing up to 26 MHz in a compact package with low power mode.
PIC18F46K22-I/PT
PIC18F46K22-I/PT by Microchip: 64MHz clock, 5V supply, 44 terminals. Ideal for industrial applications with ADC/DAC channels, PWM/Timers, SPI/I2C connectivity, and low power mode. Compact size of 10mm x 10mm with CMOS technology and FLASH ROM programmability.
TM4C1230H6PMI
TM4C1230H6PMI by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It operates at a max clock frequency of 25 MHz and has 64 terminals, suitable for industrial applications requiring high-speed processing and low power consumption. With features like ADC and DMA channels, it offers versatile functionality in compact dimensions (10mm x 10mm).
MCHC11F1CFNE4
Freescale Semiconductor
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE;
MK70FN1M0VMJ15R
NXP Semiconductors
NXP Semiconductors' MK70FN1M0VMJ15R is a 32-bit microcontroller with 256 terminals, operating at up to 60 MHz. It features 2 DAC and 4 ADC channels, suitable for applications requiring high-speed data processing and precision analog-to-digital conversion. With a wide range of peripherals including CAN, Ethernet, and UART, it is ideal for industrial automation and communication systems.
ATMEGA8535-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C8051F864-C-GSR
Silicon Labs
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
C8051F864-C-GS
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved