Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 531BB125M000DG is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, 125 MHz frequency, and 20% stability. Ideal for applications requiring precise timing like telecommunications equipment and networking devices.
Median Price
$14.468
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$13.300
100+ parts
$10.040
1k+ parts
$9.180
10k+ parts
-
DigiKey
$13.830
$10.451
$9.188
Arrow
$15.105
$13.622
$13.371
Verical
Richardson RFPD
$9.870
Chip1Stop
$16.200
Digiode
$11.286
VNN
Vyrian
Nova Conductors
Prism Electronics
Aztec Data Supply Inc.
$3.372
Corohmni
$9.438
Semicontronic
$10.100
$9.848
$9.797
Ampacity Inc.
Corphita
$10.692
GreenTree Electronics
Bastille Electronics
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Formix International (Excess)
EMSNET (Excess)
The plastic/epoxy material provides durability and resistance to environmental factors, making this oscillator suitable for a wide range of applications.
The 20% frequency stability ensures reliable and accurate performance, making it ideal for applications where precise timing is crucial.
With a maximum supply voltage of 3.63V, this oscillator can operate efficiently within standard voltage ranges found in electronic devices.
The low maximum supply current of 98mA helps in minimizing power consumption and heat generation, making it energy-efficient.
The 3.3V nominal supply voltage is commonly used in electronic systems, ensuring compatibility and ease of integration.
The LVDS oscillator type offers high-speed data transmission and low power consumption, making it suitable for demanding applications.
The compact size of 7.0mm x 5.0mm x 1.85mm allows for easy integration into tight spaces or densely populated PCBs.
The high maximum operating temperature of 85°C ensures reliable performance even in harsh environmental conditions.
The low minimum operating temperature of -40°C allows the oscillator to function in cold environments without experiencing performance issues.
The gold terminal finish with a nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term reliability.
The 125MHz nominal operating frequency offers a balance between speed and power consumption, making it suitable for various applications.
The surface mount design simplifies the assembly process and allows for automated placement, reducing production costs and time.
With a high maximum operating frequency of 945MHz, this oscillator is capable of handling high-speed data processing and communication tasks.
XO Clock Oscillators 531BB125M000DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
Taiwan Semiconductor
564AAAA002021BBG
Silicon Labs
Silicon Labs' 564AAAA002021BBG XO Clock Oscillator features LVPECL type, 3.465V max supply voltage, and 50 OHM output load. Ideal for applications requiring precise timing at frequencies ranging from 0.2 MHz to 3000 MHz in a compact 5mm x 3.2mm x 1.33mm package.
S1613B-24.5760
Diodes Incorporated
Diodes Inc.'s S1613B-24.5760 is a ceramic XO Clock Oscillator with 24.576 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in temperature range of -10 to 70°C, it operates at supply voltage of 2.97-3.63V with CMOS oscillator type and surface mounting feature.
SIT1532AC-J5-DCC-32.768S
Sitime
SIT1532AC-J5-DCC-32.768S by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 75% Frequency Stability, 3.63V Max Supply Voltage, and LVCMOS Technology. Ideal for applications requiring precise timing in compact spaces like IoT devices, wearables, and consumer electronics.
CSX-750FCC20000000T
Citizen Electronics
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 5 V;
ASE-18.432MHZ-L-C-T
Abracon
Abracon's ASE-18.432MHZ-L-C-T is a CMOS XO Clock Oscillator with 18.432 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 1.0mm package, operating b/w -40 to 85 °C temperature range.
ASEMB-16.000MHZ-LC-T
ASEMB-16.000MHZ-LC-T by Abracon is a 16 MHz XO Clock Oscillator with a frequency stability of 50%. It has a max operating temperature of 85°C and is suitable for surface mount applications.
570BBC000121DG
Silicon Labs' 570BBC000121DG is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 10-1417.5 MHz. It has a max supply voltage of 3.63 V and output load of 100 ohms. Ideal for applications requiring precise timing in electronics with stringent frequency requirements.
ASG2-LJ-156.250MHZ-513282-T
Abracon's ASG2-LJ-156.250MHZ-513282-T XO Clock Oscillator operates at 156.25 MHz with LVPECL type, 35% frequency stability, and 3.465 V max supply voltage. Ideal for applications requiring precise timing in compact designs with surface mounting feature.
AX7DAF1-106.2500C
Abracon's AX7DAF1-106.2500C is a 106.25 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a nominal voltage of 3.3 V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively, making it ideal for high-speed digital circuits in temperature-sensitive environments up to 85°C.
511BBA106M250BAG
Skyworks Solutions
LVDS; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
ACO-25.000MHZ-EK
Abracon's ACO-25.000MHZ-EK XO Clock Oscillator operates at 25MHz with 30% frequency stability. It has a max supply voltage of 5.5V and output load of 10 TTL, 15pF. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
ASFLMB-100.000MHZ-XY-T
Abracon's ASFLMB-100.000MHZ-XY-T is a 100MHz XO Clock Oscillator with 10% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 105°C.
LTC6905IS5-133#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF;
LTC6995CS6-1#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 2.4 ns;
FXO-HC536R-24.576
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45; Maximum Fall Time: 3 ns;
SG-210STF25.0000ML0
Seiko Epson
Seiko Epson's SG-210STF25.0000ML0 is a 25 MHz XO Clock Oscillator with 50% Frequency Stability, CMOS type, and 15 pF Output Load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and communication systems.
ASEMB-50.000MHZ-LC-T
Abracon's ASEMB-50.000MHZ-LC-T is a 50MHz CMOS XO Clock Oscillator with 3.3V supply voltage, suitable for applications requiring precise timing in a compact 3.2mm x 2.5mm x 0.85mm package. Operating temperature ranges from -40°C to 85°C, making it ideal for various electronic devices and systems.
ECS-2200B-049
Ecs International
ECS-2200B-049 by Ecs International is a XO Clock Oscillator with 4.9152 MHz frequency, HCMOS/TTL type, and 50% stability. Ideal for applications requiring precise timing in environments with temperatures ranging from 0 to 70°C.
ASE-50.000MHZ-L-R-T
Abracon's ASE-50.000MHZ-L-R-T is a 50MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and communication equipment.
ASAK-32.768KHZ-L-R-S-T
Abracon's ASAK-32.768KHZ-L-R-S-T XO Clock Oscillator operates at 0.032768 MHz with 25% frequency stability, LVCMOS type, and 15 pF output load. Ideal for applications requiring precise timing in a compact 2.0mm x 1.6mm x 0.7mm package, with operating temperatures ranging from -40 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
531BC125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 945 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .35 ns;
531BB300M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TAPE AND REEL;
531BB125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
531BB125M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125 MHz;
531BB100M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.85mm;
531BA312M500DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e4; Package Equivalence Code: DILCC6,.2;
531BA80M0000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 3.3;
531BC120M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.85mm;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
531BA200M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
531BA200M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
531BC200M000DG
531BB125M829DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125.829 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved