Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 530FB100M000DG is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, operating at 10-945 MHz freq range. It has 20% stability, 2.25-2.75 V supply voltage, and -40 to 85°C temp range. Ideal for applications requiring precise timing in communication systems and high-speed data processing.
Median Price
$13.820
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Element14
1+ parts
$13.220
100+ parts
$12.740
1k+ parts
-
10k+ parts
Mouser Electronics
$13.810
$10.450
$9.470
DigiKey
$13.830
$10.451
$9.188
Newark
$14.350
$7.280
Digiode
$11.276
Vyrian
$11.870
Nova Conductors
VNN
Ampacity Inc.
$10.090
Corphita
$10.683
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Perfect Parts
The plastic/epoxy package body material provides durability and protects the internal components of the oscillator, ensuring a long lifespan.
The 20% frequency stability ensures reliable and accurate timing for various applications, making this oscillator a dependable choice.
With a maximum supply voltage of 2.75 V, this oscillator can operate efficiently within a safe voltage range, reducing the risk of damage.
The low maximum supply current of 98 mA helps in minimizing power consumption and heat generation, making this oscillator energy-efficient.
The 2.5 V nominal supply voltage ensures stable and consistent performance of the oscillator in various operating conditions.
The LVDS oscillator type offers high-speed data transmission and noise immunity, making it ideal for applications requiring precise timing and robust communication.
With a maximum operating temperature of 85°C, this oscillator can withstand high-temperature environments, enhancing its reliability in diverse applications.
The wide operating temperature range of -40 to 85°C ensures the oscillator can function effectively in extreme cold or hot conditions, making it suitable for a variety of environments.
The 100 MHz nominal operating frequency provides precise timing accuracy, making this oscillator suitable for applications requiring stable clock signals.
With a maximum operating frequency of 945 MHz, this oscillator can support high-speed data transmission and processing, making it ideal for advanced electronic devices.
XO Clock Oscillators 530FB100M000DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
531FC25M0000DGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.85mm;
511FBA200M000BAG
Silicon Labs
LVDS; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
ASFLMB-8.000MHZ-LC-T
Abracon
Abracon's ASFLMB-8.000MHZ-LC-T is a 4-terminal XO Clock Oscillator with 8MHz frequency, 50% stability, and CMOS technology. Ideal for applications requiring precise timing in temperature range of -40 to 85°C. Package size of 5.0mm x 3.2mm x 0.85mm makes it suitable for surface mount installations.
570BBC000121DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
570CAC000149DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
SIT9102AI-243N25E200.00000X
Sitime
SIT9102AI-243N25E200.00000X by Sitime is a LVDS XO Clock Oscillator with 50% Frequency Stability, 200 MHz Nominal Operating Frequency, and MIL-STD-883 Screening Level. Ideal for applications requiring precise timing in harsh environments like aerospace and defense due to its small size (7mm x 5mm x 0.9mm) and wide temperature range (-40°C to 85°C).
ASDMB-10.000MHZ-XY-T
ASDMB-10.000MHZ-XY-T by Abracon is a 10 MHz XO Clock Oscillator with a frequency stability of 10%. It operates at a nominal voltage of 3.3V and has a small physical dimension of 2.5mm x 2.0mm x 0.85mm, making it suitable for surface mount applications.
ASDMB-3.6864MHZ-XY-T
Abracon's ASDMB-3.6864MHZ-XY-T is a 3.3V CMOS XO Clock Oscillator with 10% frequency stability, suitable for applications requiring precise timing. It operates at 3.6864 MHz with a max rise time of 2 ms and features a compact size of 2.5mm x 2.0mm x 0.85mm, making it ideal for surface mount installations in temperature-sensitive environments.
545BAA100M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
ECS-1612MV-080-CN-TR
Ecs International
XO, Clock;
7X-12.000MBB-T
Txc
7X-12.000MBB-T XO Clock Oscillator by Txc operates at 12MHz with a frequency stability of 50%. It has a CMOS oscillator type, 15pF output load, and requires 3.3V nominal voltage. Ideal for applications requiring precise timing in compact electronic devices due to its small physical dimensions and surface mounting feature.
SG-210STF25.0000ML
Seiko Epson
SG-210STF25.0000ML by Seiko Epson is a 25 MHz XO Clock Oscillator with 50% frequency stability and CMOS oscillator type. It operates at voltages of 1.6V to 3.6V, has a max operating temperature of 85°C, and is ideal for surface mount applications requiring precise timing control.
ECX-L33BN-212.500
ECX-L33BN-212.500 by Ecs International is a LVDS XO Clock Oscillator with 212.5 MHz frequency, 50% stability, and 3.465 V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range and compact size of 3.2mm x 2.5mm x 0.9mm.
EH3600ETTS-52.4288MTR
Abracon's EH3600ETTS-52.4288MTR XO Clock Oscillator operates at 52.4288 MHz with LVCMOS type, ensuring 100% frequency stability. It has a compact size of 3.2mm x 5.0mm x 1.3mm and is ideal for applications requiring precise timing in temperature-sensitive environments up to 85°C, making it suitable for various electronic devices and systems.
ECS-2100AX-049
ECS-2100AX-049 by Ecs International is a XO Clock Oscillator with 4.9MHz frequency, HCMOS/TTL type, and 100% stability. Ideal for applications requiring precise timing in environments with temperatures ranging from 0 to 70°C.
DSC1001AI1-025.0000T
Microchip Technology
DSC1001AI1-025.0000T by Microchip: 25MHz XO Clock Oscillator with 50% stability, 3.3V supply, CMOS type. Ideal for applications requiring precise timing in a compact form factor.
SG-8018CA123.456789M-TJHSA0
SG-8018CA123.456789M-TJHSA0 by Seiko Epson is a CMOS XO Clock Oscillator with a frequency stability of 50%. It operates at a nominal frequency of 123.456789 MHz and has a max supply voltage of 3.63 V. This oscillator is suitable for surface mount applications requiring precise timing.
534GB000559DGR
534GB000559DGR by Silicon Labs is a CMOS XO Clock Oscillator with 20% frequency stability, operating from -40 to 85°C. It has a max supply voltage of 2.75V and can handle up to 15pF output load. Ideal for applications requiring precise timing in harsh environments like military and aerospace systems.
DSC1001CI1-050.0000
DSC1001CI1-050.0000 by Microchip Tech is a 50MHz CMOS XO Clock Oscillator with 3.3V supply, 10KOHM load, and 15pF output. Ideal for applications requiring precise timing in a compact form factor, it operates b/w -40 to 85 °C and offers fast rise/fall times for efficient signal processing.
LTC6995HS6-1#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 2.4 ns;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
530FB125M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
530FB200M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC6,.2;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
530FB125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 2.5;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
530FC125M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
530FB100M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRAY;
530FB121M109DG
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Frequency: 10 MHz; Minimum Operating Temperature: -40 Cel; Nominal Operating Frequency: 121.109 MHz;
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Supply Current: 98 mA; Minimum Operating Frequency: 10 MHz; Minimum Operating Temperature: -40 Cel;
530FB121M109DGR
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Frequency: 10 MHz; Minimum Operating Temperature: -40 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Qualification: Not Qualified; Package Equivalence Code: DILCC6,.2; Maximum Supply Current: 98 mA;
530FC106M250DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Frequency: 10 MHz; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Power Supplies (V): 2.5;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Supply Voltage: 2.5 V; Manufacturer Series: SI530; Package Body Material: PLASTIC/EPOXY;
530FC156M250DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Frequency: 10 MHz; Nominal Operating Frequency: 156.25 MHz; Package Body Material: PLASTIC/EPOXY;
530FC156M250DGR
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 2.5 V; JESD-609 Code: e4;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Qualification: Not Qualified; Power Supplies (V): 2.5; Maximum Operating Temperature: 85 Cel;
530FB100M000DGR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved