Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
530BB100M000DGR by Silicon Labs is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, LVDS Oscillator Type, and 3.63V Max Supply Voltage. Ideal for applications requiring precise timing such as telecommunications equipment, networking devices, and industrial automation systems.
Median Price
$9.254
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
1k+ parts
$9.952
10k+ parts
Arrow
Verical
Rochester
$9.200
$8.230
$7.740
Vyrian
$7.500
Digiode
$11.153
Flip Electronics
ComSIT Distribution GmbH
Nova Conductors
VNN
Corohmni
$3.034
Ampacity Inc.
$8.460
Corphita
$10.566
Perfect Parts
Continental Prestige Electronics
Aranea Global
Argo Parts USA
The use of plastic/epoxy material makes the clock oscillator lightweight and durable, suitable for various applications.
The 20% frequency stability ensures reliable and accurate timing in different operating conditions.
With a high maximum supply voltage, this clock oscillator can handle higher voltage levels without any damage.
The low maximum supply current of 98 mA helps in reducing power consumption and dissipating less heat.
The 3.3V nominal supply voltage is a common voltage level that can be easily regulated for stable operation.
The 3.3V power supply is efficient and commonly available, making it easy to integrate into electronic systems.
The LVDS oscillator type offers low voltage differential signaling for high-speed and reliable data transmission.
The 6 terminals provide a secure connection and easy integration into circuit boards.
The fast rise time of 0.35 ms ensures quick signal transitions for time-critical applications.
The compact size of 7.0mm x 5.0mm x 1.85mm allows for space-saving installation in devices with limited space.
The low minimum supply voltage ensures compatibility with a wide range of power sources.
The high maximum operating temperature of 85°C allows the clock oscillator to function reliably in various environments.
The low minimum operating temperature of -40°C ensures the clock oscillator can operate in extreme cold conditions.
The gold terminal finish with a nickel barrier provides excellent conductivity and corrosion resistance for long-term reliability.
The 100MHz nominal operating frequency is suitable for a wide range of applications requiring precise timing.
The fast fall time of 0.35 ns ensures quick signal transitions for high-speed digital communication.
The 55/45 maximum symmetry ratio ensures balanced signal transitions for stable clock output.
The 10MHz minimum operating frequency allows for flexibility in applications that require lower timing frequencies.
The surface mounting feature allows for easy and secure installation on PCBs, saving space and simplifying assembly.
The high maximum operating frequency of 945 MHz enables the clock oscillator to support high-speed data processing and communication.
XO Clock Oscillators 530BB100M000DGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Semitronics
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Diotec Electronics
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Onsemi
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
SG3225VAN200.000000M-KEGA3
Seiko Epson
SG3225VAN200.000000M-KEGA3 by Seiko Epson is a 200 MHz XO Clock Oscillator with LVDS oscillator type and 30% frequency stability. It has a compact physical dimension of 3.2mm x 2.5mm x 1.05mm, making it suitable for surface mount applications in various electronic devices.
ASDMB-2.000MHZ-XY-T
Abracon
Abracon's ASDMB-2.000MHZ-XY-T is a 2MHz XO Clock Oscillator with 10% frequency stability, ideal for applications requiring precise timing. With a compact size of 2.5mm x 2.0mm x 0.85mm and CMOS oscillator type, it operates at temperatures from -40°C to 105°C, making it suitable for various electronic devices. Its surface mount feature and low supply current of 15mA make it efficient for modern PCB designs.
ASEMDLP-L-R
ASEMDLP-L-R by Abracon is a LVPECL XO Clock Oscillator with a frequency stability of 25%. It operates at a max supply voltage of 3.6V and has an output load of 50Ω. This surface mount oscillator is suitable for applications requiring precise timing in the range of 10MHz to 460MHz.
ASFL1-29.4912MHZ-L-T
Abracon's ASFL1-29.4912MHZ-L-T is a 29.4912 MHz XO Clock Oscillator with 100% frequency stability, HCMOS/TTL type, and 3.63V max supply voltage. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, with surface mounting feature.
CB3-3C-20M0000
Cts
CB3-3C-20M0000 by Cts is a ceramic XO Clock Oscillator with 20 MHz frequency, HCMOS/TTL type, and 50% stability. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its high accuracy and low jitter performance.
ASE-1.8432MHZ-L-C-T
Abracon's ASE-1.8432MHZ-L-C-T is a 1.8432 MHz XO Clock Oscillator with 50% frequency stability, ideal for applications requiring precise timing. Operating at a max supply voltage of 3.465 V, it offers a CMOS oscillator type and compact dimensions of 3.2mm x 2.5mm x 1.0mm for surface mount installations in temperature-sensitive environments up to 85°C.
AMPMEFC-20.0000T
Abracon's AMPMEFC-20.0000T is a 20 MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 5 pF output load. Ideal for applications requiring precise timing in electronics, it operates b/w -40°C to 85°C with a supply voltage range of 1.71V to 3.63V.
534GB000559DGR
Silicon Labs
534GB000559DGR by Silicon Labs is a CMOS XO Clock Oscillator with 20% frequency stability, operating from -40 to 85°C. It has a max supply voltage of 2.75V and can handle up to 15pF output load. Ideal for applications requiring precise timing in harsh environments like military and aerospace systems.
DSC1123CE1-125.0000
Ael Crystals
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 70 Cel;
ECS-1612MV-080-CN-TR
Ecs International
XO, Clock;
ASFLMB-12.288MHZ-LC-T
Abracon's ASFLMB-12.288MHZ-LC-T is a 12.288MHz XO Clock Oscillator with 50% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication equipment.
SG-8018CA12.345678M-TJHPA0
SG-8018CA12.345678M-TJHPA0 by Seiko Epson is a CMOS XO Clock Oscillator with 12.345678 MHz frequency, 50% stability, and 15 pF load. Ideal for applications requiring precise timing in a wide temperature range from -40 to 105 °C, with compact dimensions of 7.0mm x 5.0mm x 1.3mm for surface mount installation.
545BAA312M500BBGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
DSC1004DI2-016.0000
Microchip Technology
DSC1004DI2-016.0000 by Microchip is a CMOS XO Clock Oscillator with 16MHz frequency, 25% stability, and 3.3V supply voltage. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high performance.
ECX-L33BN-33.000
ECX-L33BN-33.000 by Ecs International is a LVDS XO Clock Oscillator with 33 MHz frequency, 50% stability, and 3.465 V max supply voltage. Ideal for applications requiring precise timing in a compact form factor, such as telecommunications equipment or industrial automation systems.
632L3I008M00000
The Cts 632L3I008M00000 is a XO Clock Oscillator with a frequency stability of 50%, max supply voltage of 3.63V, and output load of 15pF. It is commonly used in applications requiring precise timing and synchronization, such as telecommunications, networking, and industrial automation.
ASFLMB-40.000MHZ-LC-T
Abracon's ASFLMB-40.000MHZ-LC-T is a 40 MHz XO Clock Oscillator with CMOS technology, 50% frequency stability, and 15 pF output load. It operates at temperatures from -40 to 85 °C and has a compact size of 5.0mm x 3.2mm x 0.85mm, making it ideal for surface mount applications in various electronic devices.
MXO45-3C-4M9152
MXO45-3C-4M9152 by Cts is a 4.9152 MHz XO Clock Oscillator with HCMOS/TTL type, 50% frequency stability, and 5.5V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
LTC6995MPS6-2#PBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION;
DSC1121AI2-162.0000T
DSC1121AI2-162.0000T by Microchip: 162MHz XO Clock Oscillator with 25% Stability, 3.6V Max Supply Voltage, and 15pF Output Load. Ideal for applications requiring precise timing in a compact form factor.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
530BC156M250DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
530BC156M250DGR by Silicon Labs is a LVDS XO Clock Oscillator with 7% frequency stability, operating at 156.25 MHz. It has a max supply voltage of 3.63 V and output load of 100 ohms. Ideal for applications requiring precise timing in electronic devices.
530BC156M250DG
530BC156M250DG by Silicon Labs is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, 6 terminals, and 3.3V supply voltage. Operating from -40 to 85 °C, it has a frequency range of 10-945 MHz. Ideal for applications requiring precise timing in electronic devices.
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Supply Current: 98 mA; Maximum Operating Frequency: 945 MHz; Nominal Operating Frequency: 156.25 MHz;
530BB125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
Silicon Labs' 530BB125M000DG is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, LVDS type, and 125 MHz Nominal Operating Frequency. Ideal for applications requiring precise timing such as telecommunications equipment and networking devices.
530BB125M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 3.3;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC6,.2;
530BC250M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 250 MHz;
530BA125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
530BA12M2700DGR
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; JESD-609 Code: e4; Package Equivalence Code: DILCC6,.2; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; JESD-609 Code: e4; Package Equivalence Code: DILCC6,.2; Power Supplies (V): 3.3;
530BA125M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
530BC50M0000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 50 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
530BB100M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.85mm;
530BB100M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved