Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.4; Lens Type: RED DIFFUSED; Height: 4.6 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
LIBRA Elektronik GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
A&K Electronics
Rotakorn
Bristol Electronics
Nova Conductors
Aztec Data Supply Inc.
$0.670
Modulus Dynamics
$0.765
$0.734
$0.704
Ampacity Inc.
$6.100
AZTECH Wire
$7.729
Semicontronic
$13.100
$12.772
$12.707
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Corphita
Perfect Parts
Cyclops Electronics Ltd (Excess)
Assy Fe
Visible LEDs LS3360-K attributes and parameters. Explore more Visible LEDs devices from Siemens
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
T-code:
Terminal Pitch:
Viewing Angle:
LS3360-K Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
Changzhou Starsea Electronics
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Taiwan Semiconductor
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
XHP35B-00-0000-0D0BD40E5
Wolfspeed
SINGLE COLOR LED;
SSL-LX5093XUSBC
Lumex
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
CMD17-21VGC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: CLEAR; Shape: RECTANGULAR;
LSA676-P2S1-1-Z
Osram Opto Semiconductors
LSA676-P2S1-1-Z by Osram Opto Semiconductors is a 2.4mm single color LED with peak wavelength of 645nm, ideal for applications requiring super red light emission. With a max forward current of 0.03A and viewing angle of 120°, it's suitable for surface mount installations in various electronic devices. Operating temperature ranges from -40 to 100 °C, making it versatile for different environments.
MLCAWT-H1-0000-0000E1
Wolfspeed's MLCAWT-H1-0000-0000E1 is a single color LED with max forward current of 0.35A and height of 1.2mm. It operates at up to 150°C, emits white light at 3.4V, ideal for applications requiring high luminous intensity like automotive lighting.
XHP35B-H0-0000-0D0BD40E2
XHP35B-00-0000-0D0BE240E
17-570231
Eao
HLMP4740
HLMP4740 by Cml Technologies & Kg is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.0075A and viewing angle of 35°. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
VLMU3500-385-060
Vishay Intertechnology
LST676-R1S1-1-Z
Osram Opto Semiconductors' LST676-R1S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 168.0mcd, making it suitable for various lighting solutions.
LGL29K-G2J1-24-0-2-R18-Z
Osram Opto Semiconductors' LGL29K-G2J1-24-0-2-R18-Z is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and viewing angle of 160°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 3.92mcd.
NSPW510DS
Nichia
SINGLE COLOR LED; Terminal Finish: SILVER; JESD-609 Code: e4;
TLMS1100-GS08
TLMS1100-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 645nm, ideal for applications requiring RED light emission. It has a max forward current of 0.03A and viewing angle of 160°, suitable for surface mount configurations in various electronic devices.
CLX6F-FKC-CNP1ST1E1BB7D3D3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 877.5/1405.0/267.5; Packing Method: TR, 13 INCH; Maximum Reverse Voltage: 5 V;
CMD17-21VGD/TR8
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: DIFFUSED; Height: 1.1 mm;
HLMP-3507-D0001
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SLR-342VR3F
ROHM
ROHM's SLR-342VR3F is a 3.1mm single color LED with peak wavelength of 650nm, diffused lens, and red color. It has 2 terminals with tin/silver/copper finish, T-1 code, and radial mount feature. Ideal for applications requiring visible LEDs in compact size like indicator lights or displays.
LTST-C170KRKT-5A
Lite-on Technology
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LS3336-T1U2-1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 495.0; Lens Type: COLORLESS CLEAR NONDIFFUSED; Terminal Finish: Tin (Sn);
LS3360-K
Infineon Technologies
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 5.6 mm; Maximum Operating Temperature: 100 Cel; Viewing Angle: 70 deg;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.15; Lens Type: DIFFUSED RED; Terminal Finish: Tin (Sn);
LS3360-KN
Siemens
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 28.15; Lens Type: RED DIFFUSED; Height: 4.6 mm;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Minimum Operating Temperature: -55 Cel; Color At Wavelength: Amber;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: DIFFUSED RED; Terminal Finish: Tin (Sn);
LS3380-J
LS3380-J by Infineon Technologies is a visible LED with a peak wavelength of 635nm and diffused lens type. It operates at temperatures ranging from -55°C to 100°C and has a max forward voltage of 2V. This LED is commonly used in applications that require red light emission with a wide viewing angle of 100°.
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: RED DIFFUSED; Packing Method: TR;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.8; Lens Type: DIFFUSED RED; Terminal Finish: Tin (Sn);
LS3360-HL
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.6 V; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e0;
LS3341-P
Visible LEDs; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: -55 Cel; Height: 4.5 mm;
LS3340-L
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.6 V; Viewing Angle: 50 deg; Maximum Operating Temperature: 100 Cel;
LS3336-S
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Height: 4.4 mm;
LS3340-LP
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 635; Color At Wavelength: Red;
LS3340-M
Visible LEDs; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel; Color At Wavelength: Red;
LS3336-R
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Height: 4.4 mm; Maximum Forward Voltage: 2.6 V; Maximum Forward Current: .03 A;
LS3336-T
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 50 deg; JESD-609 Code: e0; Maximum Forward Voltage: 2.6 V;
LS3340-N
LS3341-LP
Visible LEDs; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Color At Wavelength: Red; JESD-609 Code: e0;
LS3366-PE7504
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60; Lens Type: DIFFUSED RED; Terminal Pitch: 2.54 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved