Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Nominal Input Trigger Current: 2 mA; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1; Configuration: SINGLE;
Median Price
$3.460
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.184
100+ parts
$0.175
1k+ parts
10k+ parts
-
Chip1Stop
$2.190
$1.619
Mouser Electronics
$2.120
$1.750
$1.740
Newark
$3.560
$2.340
$2.140
$2.100
DigiKey
$3.910
$2.271
$1.916
$1.842
Farnell
$3.920
$1.908
$1.791
Element14
$4.250
$2.850
$2.760
Verical
$1.939
$1.652
Arrow
$1.932
$1.647
Digiode
Nova Conductors
$2.645
NAC Semi
$2.570
$2.370
ComSIT Distribution GmbH
ComSIT USA
Vyrian
IBS Electronics
$1.976
$1.911
Cyclops Electronics Ltd
R&J Components
MISTER SPROCKETS
Q Components
Semicontronic
$0.156
$0.152
$0.151
Corphita
$0.166
Advanced Electronics
Aztec Data Supply Inc.
$0.261
Modulus Dynamics
$0.279
$0.268
$0.257
Corohmni
$0.399
Continental Prestige Electronics
$2.500
$1.710
$1.640
Argo Parts USA
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Eastek
Robosynatics
$20.830
Lucentia Tech
Futuretech Components
Optocoupler Trigger Device Outputs IL4108 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Siemens
Configuration:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
No. of Elements:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
IL4108 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Rectron
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Diotec Electronics
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
MOC3021
Motorola
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 7500 V; Additional Features: UL RECOGNIZED, INTERFACING MICROPROCESSOR; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel;
MOC3020
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Operating Temperature: 85 Cel; Repetitive Off-state Voltage (Peak): 400 V;
FODM3023
The Onsemi FODM3023 is a single TRIAC output optocoupler with max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 to 100 °C, has isolation voltage of 3750V, and peak off-state voltage of 400V. Ideal for triggering devices in applications requiring high isolation levels and surface mounting feature.
BRT13H-X007
Siemens
TRIGGER OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE; No. of Elements: 1; Maximum On State Current: .3 A;
MOC3011
Thomson Consumer Electronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Maximum Input Trigger Current: .01 A; Maximum On State Voltage: 3 V; Repetitive Off-state Voltage (Peak): 250 V;
IL420-X009T
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Maximum On State Current: .3 A; No. of Elements: 1; Nominal Input Trigger Current: 1 mA; Additional Features: HIGH SENSITIVITY, UL RECOGNIZED;
IL4218-X016
Vishay Intertechnology
The Vishay Intertechnology IL4218-X016 is a single optocoupler with a max forward current of 0.06A and isolation voltage of 5300V. With a nominal input trigger current of 0.7mA, it operates b/w -55°C to 100°C. Ideal for applications requiring high isolation and reliable triggering in industrial electronics.
ASO242R
Crydom
The Crydom ASO242R is a SINGLE SCR OUTPUT OPTOCOUPLER with 2500V isolation voltage. Operating temperature ranges from -30°C to 80°C, making it suitable for various trigger device output applications. Its Tin (Sn) finish with Nickel (Ni) barrier ensures reliable performance in demanding environments.
BRT23H-X018T
Vishay Intertechnology's BRT23H-X018T is a single optocoupler with TRIAC output, featuring 0.06A max forward current and 800V min peak off-state voltage. With 2mA nominal input trigger current, it operates b/w -40°C to 100°C, offering high isolation at 5300V. Ideal for applications requiring precise triggering in harsh environments.
BRT13H-X017T
Vishay Intertechnology's BRT13H-X017T is a single TRIAC output optocoupler with max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40 to 100°C, ideal for triggering devices in high-voltage applications like industrial control systems and power supplies.
IL4217
TRIAC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; Nominal Input Trigger Current: 1.3 mA; Configuration: SINGLE; Minimum Peak Off-state Voltage: 700 V;
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; Nominal Input Trigger Current: 30 mA; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e0;
MOC3023
General Electric Solid State
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .005 A;
MOC3021TVM
MOC3021TVM by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high electrical isolation.
IL4217-X009
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH SENSITIVITY, UL APPROVED; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Nominal Input Trigger Current: .7 mA;
IL4208-X007T
TRIAC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1;
MOC3042TVM
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Peak Surge Current: 1 A; Maximum On State Voltage: 3 V; JESD-609 Code: e3;
Isocom Components
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; No. of Elements: 1; Nominal Input Trigger Current: 30 mA; Maximum On State Current: .1 A;
MOC3042VM
MOC3042VM by Onsemi is a single optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It features a triac output configuration, ideal for applications requiring high isolation voltages up to 7500V. With an operating temperature range from -40°C to 85°C, it is suitable for through-hole mounting in various electronic devices.
TLP762JF(D4,F)
Toshiba
Toshiba's TLP762JF(D4,F) optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 4000V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation in temperatures ranging from -25°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IL4108
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .3 A; No. of Elements: 1; Additional Features: UL RECOGNIZED, HIGH SENSITIVITY; Nominal Input Trigger Current: 2 mA;
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Isolation Voltage: 5300 V; Nominal Input Trigger Current: 2 mA; Maximum Operating Temperature: 100 Cel;
Telefunken Microelectronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Surge Current: 3 A; No. of Elements: 1; Maximum Input Trigger Current: .006 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .3 A; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3;
IL410
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Configuration: SINGLE; No. of Elements: 1; Nominal Input Trigger Current: 2 mA; Minimum Peak Off-state Voltage: 600 V; Maximum Isolation Voltage: 5300 V;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V;
The Vishay Intertechnology IL410 is a single optocoupler trigger device with a max forward current of 0.06A and a nominal input trigger current of 2mA. It features a triac output optocoupler with zero cross voltage for applications requiring high isolation voltages up to 5300V, making it suitable for use in industrial control systems and power management applications.
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum On State Current: .3 A;
IL4108-X007T
Vishay Intertechnology IL4108-X007T is a single optocoupler with 0.06A forward current, 2mA trigger current, and 800V peak off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 5300V, such as industrial control systems and power supplies.
IL4108-X007
IL4108-X007 by Vishay Intertechnology is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100°C, with a max isolation voltage of 5300V. Ideal for applications requiring optocoupler trigger devices in surface mount configurations.
IL4108-X009T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A; Maximum Forward Current: .06 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .3 A; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Forward Current: .06 A; Minimum Operating Temperature: -55 Cel; Nominal Input Trigger Current: 2 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5300 V;
IL4108-X009T by Vishay Intertechnology is a single optocoupler with triac output. It has a max forward current of 0.06A and isolation voltage of 5300V, making it suitable for high-voltage applications. With a nominal input trigger current of 2mA, it operates b/w -55°C to 100°C, ideal for various industrial control systems.
IL410-X007T
IL410-X007T by Vishay Intertechnology is a single optocoupler trigger device output with a max forward current of 0.06 A. It is a triac output optocoupler with zero CRSVR, operating at temperatures ranging from -55 to 100 °C. This component has applications in various industries requiring isolation and control of high voltage circuits.
IL410-X007
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Forward Current: .06 A; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: 2 mA; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .3 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH SENSITIVITY, UL APPROVED; Minimum Peak Off-state Voltage: 600 V; Maximum On State Current: .3 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, HIGH SENSITIVITY;
IL410-X009
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: 2 mA; JESD-609 Code: e3; Maximum Forward Current: .06 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved