Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMPLEX; Display Height: 3.7 mm; Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Fibra_Brandt Electronic GMBH
R&J Components
Modulus Dynamics
$0.786
$0.755
$0.723
AZTECH Wire
$11.874
Ampacity Inc.
$20.100
Continental Prestige Electronics
Argo Parts USA
Assy Fe
Bastille Electronics
Corphita
LED Displays HDSP2003LP attributes and parameters. Explore more LED Displays devices from Siemens
Additional Features:
Color:
Configuration:
Display Height:
JESD-609 Code:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
HDSP2003LP Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1554216004
Molex
WIRE AND CABLE;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
HCMS-3962
Broadcom
Broadcom's HCMS-3962 LED display features a 5x7 dot matrix configuration with peak wavelength of 641nm. With red-orange color and 4.57mm height, it operates b/w -40°C to 85°C. Ideal for applications requiring a complex display with up to 4 functions.
TIL392-6
TIL392-6 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has common cathode configuration, 6 characters, and red color at 3mm display height. With max operating temp of 85°C and min of -25°C, it's ideal for applications requiring high visibility and low power consumption.
GW5BNF15L00
Sharp Corporation
Sharp Corporation's GW5BNF15L00 is a complex LED display with single color white cluster. It has a max forward current of 0.72A and operates b/w -30 to 90°C. Ideal for applications requiring bright, energy-efficient lighting such as signage, displays, and indicators.
TIL840
TIL840 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It has a peak wavelength of 655nm and displays in red color. With a display height of 13mm, it operates b/w -25°C to 85°C, with a max forward voltage of 2V. Ideal for applications requiring compact numeric displays.
HDSP-A27C
Broadcom's HDSP-A27C LED display features 2 digits with decimal point, common cathode configuration, and a max forward current of 0.05A. Ideal for applications requiring a 16-segment alphanumeric display, it operates b/w -40°C to 105°C and has a display height of 13.8mm.
VSL-CC-15B-35-802
Dialight
Dialight's VSL-CC-15B-35-802 is a single color LED display cluster with cool white light. It operates b/w -40°C to 55°C, making it suitable for various applications. The terminal finish is Tin/Lead (Sn/Pb), ensuring reliable performance in diverse environments.
TIL311
Ams-taos Usa
LED Displays; Maximum Operating Temperature: 85 Cel; Color At Wavelength: Red; No. of Characters: 1; Configuration: N/A; Minimum Operating Temperature: 0 Cel;
HDSP-5521-GH000
Broadcom's HDSP-5521-GH000 LED display features 2 digits with decimal point, max forward current of 0.03A, and peak wavelength of 635nm. Ideal for applications requiring a smart/normal 7-segment numeric display with high efficiency red color output.
5082-7620
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Voltage: 2.5 V; Peak Wavelength (nm): 583; JESD-609 Code: e0;
LDS-HTC304RI
Lumex
Lumex LDS-HTC304RI is a red LED display with common cathode configuration. It features 7-segment numeric design, 0.03A max forward current, and 7.8mm display height. Ideal for applications requiring temperature range of -40 to 105°C such as digital clocks or timers.
TIL303A
TIL303A by Texas Instruments is a complex LED display with peak wavelength of 660nm. It has max forward current of 0.03A and max forward voltage of 3.8V. Ideal for smart/normal numeric displays, operating b/w 0-70°C, with red color at 6.9mm height.
SA56-11EWA
Kingbright Electronic
SA56-11EWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A Forward Current, emitting HIGH EFFICIENCY RED light at 625nm. Ideal for applications requiring a compact display solution with a height of 14.22mm, operating b/w -40°C to 85°C.
DSM7UA20101
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
HCMS-2961
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 583; Display Height: 5.08 mm; No. of Functions: 4; Color: YELLOW;
BA56-11GWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Maximum Forward Current: .025 A; Minimum Operating Temperature: -40 Cel; Display Height: 14.22 mm; Color: GREEN;
TDSR1350
Vishay Telefunken
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .01 A; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 13 mm; Maximum Operating Temperature: 85 Cel;
HDSP5621
Morrihan International
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; No. of Characters: 2; JESD-609 Code: e0; Color At Wavelength: Green;
SA23-12SRWA
SA23-12SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current. Featuring SUPER BRIGHT RED color, it operates b/w -40 to 85 °C and has a display height of 56.9mm. Ideal for applications requiring clear numeric displays in various temperature conditions.
HDLG-2416
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel; No. of Functions: 4; Peak Wavelength (nm): 568;
TIL704
TIL704 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 680nm and red color. It has a display height of 13mm, max forward voltage of 2V, and operates b/w -25°C to 85°C. Ideal for applications requiring clear numeric displays in various temperature conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDSP-2533
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 8; Display Height: 5 mm; Configuration: COMPLEX; Color At Wavelength: Green;
Agilent Technologies
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 568; Display Height: 5 mm;
HDSP-2533 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and features green color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
HDSP-2112
HDSP-2112 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -45°C to 85°C, featuring high efficiency red color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Display Height: 5.08 mm; No. of Functions: 8; Peak Wavelength (nm): 635;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Additional Features: CMOS COMPATIBLE; Configuration: COMPLEX; Color: HIGH EFFICIENCY RED;
HDSP-433G
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 105 Cel; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; No. of Characters: 5;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 105 Cel; No. of Characters: 5; Color At Wavelength: Green;
HDSP-U201
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Color At Wavelength: Red; Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN SILVER COPPER; Maximum Forward Current: .03 A; Minimum Operating Temperature: -25 Cel; No. of Characters: 1; Display Height: 8 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 90 Cel;
HDSP-2113
Broadcom's HDSP-2113 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It operates b/w -45°C to 85°C, featuring green color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -45 Cel; Color: HIGH PERFORMANCE GREEN; Additional Features: CMOS COMPATIBLE; Peak Wavelength (nm): 568;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Minimum Operating Temperature: -45 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0;
HDSP-2534
HDSP-2534 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 645nm. It has 8 functions, operates b/w -40°C to 85°C, and features red color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Copper (Sn/Cu); Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel; Color: RED; Display Height: 5 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 645;
HDSP-U101
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Display Height: 8 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Red; Maximum Operating Temperature: 90 Cel; Maximum Forward Current: .015 A;
HDSP-U101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It operates at temperatures from -20 to 90 °C and has a max forward current of 0.015A. Ideal for applications requiring a RED display with 8mm height, such as digital clocks or electronic meters.
Siemens
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved