Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Sharp Corporation's PC713V0NSZXF is a SINGLE optocoupler with max forward current of 0.05A and min operating temp of -25°C. Ideal for applications requiring high collector-emitter breakdown voltage (80V) and max isolation voltage of 5000V, such as industrial control systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$10.880
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Kepictronics
Aranea Global
Single configuration makes it suitable for applications where only one channel is needed, reducing complexity and saving space.
The high maximum forward current allows for reliable operation with various loads, ensuring versatility in different circuit designs.
Transistor output optocoupler offers fast response times and high switching speeds, making it ideal for applications requiring quick and precise signal transmission.
With a high maximum operating temperature, this optocoupler can withstand elevated temperatures, increasing its reliability in harsh environments.
The low minimum operating temperature ensures reliable performance even in cold conditions, making it suitable for a wide range of applications.
The tin/copper terminal finish provides good conductivity and corrosion resistance, ensuring long-term reliability in various operating environments.
Low dark current helps in minimizing power consumption and improving the signal-to-noise ratio, resulting in more accurate signal transmission.
The high breakdown voltage ensures reliable isolation between input and output, safeguarding the connected circuitry from damage due to voltage spikes.
The nominal current transfer ratio indicates the efficiency of signal transmission, ensuring accurate reproduction of input signals at the output.
The high isolation voltage provides reliable protection against voltage surges, enhancing the safety of connected components and circuits.
Optocoupler Transistor Outputs PC713V0NSZXF attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Sharp Corporation
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
PC713V0NSZXF Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Sharp Corp is a Japan-based company that is principally engaged in producing and selling a broad range of consumer and industrial electronic products. The company's business segments consist of the consumer electronics segment, the energy solutions segment, the business solutions segment, the electronic components and devices segment, and the display devices segment. The company generates over half of its revenue from the consumer electronics segment and the display devices segment. It has a global business presence, with China, Japan, the Americas, and Europe its four largest markets.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Uniohm
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Silicon Standard
EU2B-YS2J03C
Idec
ROTARY SWITCH;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
H11G1SM
The Onsemi H11G1SM is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and an isolation voltage of 7500V. With a min operating temperature of -40°C and max of 100°C, it is ideal for applications requiring high current transfer ratio, such as industrial control systems and power supplies.
LTV-356T-C-G
Lite-on Technology
LTV-356T-C-G by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and min CTR of 200%. It operates b/w -55 to 110°C, has an isolation voltage of 3750V, and is ideal for applications requiring high-speed response times in surface mount configurations.
ACPL-217-56BE
Broadcom
ACPL-217-56BE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with high collector-emitter breakdown voltage and low dark current.
4N35
4N35 by Texas Instruments is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage up to 3550V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
CNY66
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 32 V; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Dark Current: 200 nA; Minimum Operating Temperature: -55 Cel;
4N35-X007T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 30 V; Minimum Operating Temperature: -55 Cel;
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Dark Current: .5 nA; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 5300 V;
MCT61
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 100 nA; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 6 %;
SFH6186-4T
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE; Nominal Current Transfer Ratio: 200 %; Minimum Collector-emitter Breakdown Voltage: 55 V;
SFH6156-3-X001
SFH6156-3-X001 by Infineon is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
TLP185(Y,SE
Toshiba
Toshiba's TLP185(Y,SE optocoupler features a single transistor output with max forward current of 0.05A and min transfer ratio of 50%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temperature range -55 to 110°C.
FOD2742BR2
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Current Transfer Ratio: 100 %; Maximum Operating Temperature: 85 Cel;
4N35M
4N35M by Onsemi is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C. With 7500V isolation voltage, it's ideal for applications requiring high reliability like industrial control systems and power supplies due to its fast response time of 0.00001s.
MOCD223R2VM
MOCD223R2VM by Onsemi is a 2-channel optocoupler with Darlington output. It has a max forward current of 0.06A, operating temp range of -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
PS2811-1-F3-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 40 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA;
4N25M
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -55 Cel;
CNY17F-2
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 45 %; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel;
MOCD223M
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 500 %; Maximum Forward Voltage: 1.3 V; Nominal Current Transfer Ratio: 1000 %;
CNY17-3
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A;
SFH6156-4
Vishay Intertechnology
Vishay Intertechnology's SFH6156-4 is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage up to 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PC715V
Sharp Corporation
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Nominal Current Transfer Ratio: 1600 %; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A;
PC713V0NSZX
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Collector-emitter Breakdown Voltage: 80 V; Additional Features: UL RECOGNIZED; JESD-609 Code: e0; Maximum Isolation Voltage: 5000 V;
PC713V0YSZX
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Nominal Current Transfer Ratio: 50 %; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V;
PC713V0YSZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Copper (Sn/Cu); Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED;
PC713V0NIPX
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 50 %; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .05 A;
PC713V0NIZX
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 100 Cel;
PC713V0YIPX
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Dark Current: 100 nA; Maximum Forward Current: .05 A;
PC713V0YIZX
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE; Additional Features: UL RECOGNIZED; No. of Elements: 1; Nominal Current Transfer Ratio: 50 %;
PC713V1NIPX
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .05 A; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel;
PC713V5NIZX
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Dark Current: 100 nA; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
PC713V6YIZX
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 130 %; No. of Elements: 1; Configuration: SINGLE;
PC713V8NIPX
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 80 %; Configuration: SINGLE; Maximum Dark Current: 100 nA; No. of Elements: 1; Maximum Isolation Voltage: 5000 V;
PC713V0NIPXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 50 %; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .05 A; Configuration: SINGLE;
PC713V0NIZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Maximum Forward Current: .05 A; Configuration: SINGLE; Additional Features: UL RECOGNIZED;
PC713V0YIPXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Isolation Voltage: 5000 V; JESD-609 Code: e6; No. of Elements: 1; Maximum Forward Current: .05 A;
PC713V0YIZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Configuration: SINGLE; Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e6; Maximum Operating Temperature: 100 Cel;
PC713V1NIZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
PC713V3YIZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 200 %; Configuration: SINGLE; No. of Elements: 1; Maximum Dark Current: 100 nA;
PC713V5YSZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 80 V;
PC713V6NIZXF
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel; Maximum Dark Current: 100 nA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved