Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
$2.990
Lifecycle Status
Suppliers In-Stock
43
In-Stock Inventory
1k+
Arrow
1+ parts
$1.086
100+ parts
$1.006
1k+ parts
$0.928
10k+ parts
-
Adafruit Industries
$2.509
Farnell
$3.470
$2.120
$2.030
Element14
$5.550
$3.800
$3.160
Verical
Digiode
$1.032
Nova Conductors
$2.460
TME
$4.670
$3.070
American Microsemiconductor Inc.
$14.850
Zilex Electronics Inc.
Digital Electronic Gebert Verwaltungs UG
J & M Industries LLC
Anansix
Prism Electronics
LIBRA Elektronik GmbH
Flip Electronics
Vyrian
Schukat
$2.939
Halfin
EMSNET
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
Inventory MP
Rutronik
$1.820
Holdelec - ElecDif-Pro
Fibra_Brandt Electronic GMBH
Pegasus Components GmbH
MISTER SPROCKETS
LittleDiode
Huijzer Components
Ashlea Components Ltd
First Choice Components Inc.
Lakeland Logistics Inc
Mentor Electronics Marketing, LLC
Bristol Electronics
Electronic Expediters
Q Components
Elcom Components
ABC Electronics Ltd.
Cogito LLC
Sogenti Electronics
Corphita
$0.977
Aranea Global
$2.411
$2.314
Argo Parts USA
Advanced Electronics
Corohmni
$2.535
Continental Prestige Electronics
$2.920
$1.910
$1.320
AZTECH Wire
$2.950
$2.830
$2.780
$2.720
Vigor
$3.460
IDEA Electronic Components Group
$18.877
$16.989
Aztec Data Supply Inc.
$19.570
MKK Technologies
$35.496
DigiPath Technology Company
Kepictronics
Lixinc
Perfect Parts
GreenTree Electronics
Assy Fe
Eastek
A-Z Elektronik GmbH
Parana Technologies
$22.570
Authorized Procurement Solutions
Alle Elektronik GmbH
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
$4.199
A-Plus Industry Inc.
Motion Control ICs L6506 attributes and parameters. Explore more Motion Control ICs devices from Sgs-ates Componenti Electronici S P A
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
L6506 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-475-9165, 5962014759165
NIIN
014759165
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LM358N
Fairchild Semiconductor
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
PS22A74
Mitsubishi Electric
Mitsubishi Electric's PS22A74 is a Motion Control IC with 42 terminals, operating at 15V nominal voltage. It features a max output current of 30A and supports AC motor control applications. The IC comes in a rectangular package measuring 31mm x 79mm, suitable for microelectronic assembly with through-hole terminal form.
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
DRV8353RSRGZR
DRV8353RSRGZR by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au/Ag.
EMC2301-1-ACZL-TR
Microchip Technology
Microchip Technology's EMC2301-1-ACZL-TR is a Motion Control IC with 3.3V supply voltage, suitable for automotive applications. It features a small outline package, matte tin terminal finish, and operates b/w -40 to 125°C. Ideal for brush DC motor control with dual terminals and gull wing form factor.
MC33887APVW
Freescale Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8847SPWR
DRV8847SPWR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 18V, and max output current of 4A. Ideal for automotive applications, this stepper motor controller has a small outline package shape and can operate in temperatures ranging from -40°C to 125°C.
A3983SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3983SLPTR-T is a Motion Control IC with 24 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2A at supply voltages ranging from 3V to 5.5V. The compact rectangular package style with gull wing terminals makes it suitable for applications requiring precise motion control in tight spaces.
TMC2160A-TA-T
Trinamic Motion Control & Kg
TMC2160A-TA-T by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 10-50V. It features a temperature range of -40 to 125°C, suitable for automotive applications requiring precise stepper motor control in compact spaces.
STIPNS2M50T-H
STIPNS2M50T-H by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and max output current of 4A. It is designed for AC motor control applications in automotive environments, featuring a compact rectangular package style suitable for surface mount assembly.
DRV8350SRTVT
DRV8350SRTVT by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 9-75V, and max output current of 1A. It is ideal for automotive applications due to its high temp grade (125°C), compact size (5x5mm), and brushless DC motor control capabilities.
DRV8816PWPR
DRV8816PWPR by Texas Instruments is a Motion Control IC with 16 terminals and DMOS technology. It operates b/w -40 to 85°C, supporting a max output current of 2.8A for brush DC motor control applications. This small outline package with gull wing terminals is suitable for industrial use at voltages ranging from 8V to 38V.
IKCM30F60GDXKMA1
Infineon Technologies
IKCM30F60GDXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 60A. Ideal for AC motor control applications in industrial settings due to its temp range of -40°C to 100°C and compact rectangular package design (36mm x 21mm x 5.6mm).
FSB50550AS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
DRV8428RTER
DRV8428RTER by Texas Instruments is a Motion Control IC with a 24V supply voltage, suitable for automotive applications. It features a max output current of 0.01A and operates in temperatures ranging from -40 to 125°C. This stepper motor controller comes in a square-shaped chip carrier package with surface mount capability.
FSBB30CH60CT
FSBB30CH60CT by Onsemi is a Motion Control IC with 300V Vsup, 60A max output current, and 400V max supply voltage. Ideal for AC motor control applications due to its dual terminal position and flange mount package style.
DRV8872DDARQ1
DRV8872DDARQ1 by Texas Instruments is a Motion Control IC with 24V nominal voltage and 3.5A max output current. Ideal for automotive applications, it features AEC-Q100 screening level, -40 to 125°C operating temperature range, and GULL WING terminal form.
LB1938FA-BH
LB1938FA-BH by Onsemi is a motion control IC with a supply voltage range of 2.2V to 10V and a max output current of 0.8A. It is commonly used as a brushless DC motor controller in various applications.
DRV8332DKDR
Texas Instruments' DRV8332DKDR is a Motion Control IC with 36 terminals, suitable for Brush DC Motor Controller applications. It operates at a nominal voltage of 12V and can handle max output current of 13A. With a package style of Small Outline, it is designed for industrial use with an operating temperature range from -40 to 85°C.
FNB41060B2
FNB41060B2 by Onsemi is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 16.5V, and max output current of 15A. This AC MOTOR CONTROLLER has a rectangular package style with dimensions of 39mm x 23mm x 7.5mm, making it suitable for various motion control applications requiring precise voltage regulation and high current handling capabilities.
DRV8332DKD
Texas Instruments' DRV8332DKD is a Motion Control IC with 36 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at -40 to 85°C, with Vsup ranging from 10.8V to 52.5V and max output current of 13A. The package style is SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH in RECTANGULAR shape made of PLASTIC/EPOXY material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L6506D013TR
L6506D013TR by STMicroelectronics is a Motion Control IC with 20 terminals, operating at 4.5-7V. It features a small outline package, Gull Wing terminal form, and is ideal for stepper motor control applications. With dimensions of 12.8mm x 7.5mm x 2.65mm, it can withstand peak reflow temperatures up to 260°C.
L6506D
L6506D by STMicroelectronics is a Motion Control IC with 20 terminals, operating voltage of 5V, and small outline package. Ideal for stepper motor control applications, it has a temperature range of 0-70°C and uses bipolar technology. With surface mount capability and compact dimensions (12.8mm x 7.5mm x 2.65mm), it offers precise motion control in various commercial settings.
L6506
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
L6506D1
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sgs-ates Componenti Electronici S P A
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved