Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Semitec's 103JT-025 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3435 K. Ideal for temperature sensing applications, it has a max operating temperature of 90°C and min of -50°C. Its radial terminal placement and rectangular package make it suitable for through hole mounting.
Median Price
$0.501
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
1k+ parts
$0.393
10k+ parts
$0.343
Nova Conductors
$0.556
Rapid Electronics
$1.663
$0.942
$0.831
Vyrian
Prism Electronics
Aztec Data Supply Inc.
$0.350
Continental Prestige Electronics
$0.545
Argo Parts USA
$0.539
Netroflash
$0.528
$0.517
AZTECH Wire
$10.022
RC Electronics
Assy Fe
SIE Connect GmbH (Excess)
This product is specifically designed for accurately sensing temperature changes, making it suitable for various temperature control applications.
Radial terminal placement allows for easy mounting and installation, making this product convenient to use in different circuits.
The rectangular package design helps in efficient PCB layout and space-saving integration, making this product ideal for compact electronic devices.
The high resistance value of 10000 ohm allows for precise temperature measurements and accurate control in temperature-sensitive applications.
The wire terminal shape provides a secure connection and easy soldering, ensuring stable performance and reliability in various circuit configurations.
With a maximum operating temperature of 90°C, this product can withstand high-temperature environments without compromising its performance.
The high thermal sensitivity index of 3435 K ensures accurate temperature readings and quick response to temperature changes, making this product highly efficient for temperature sensing applications.
The low minimum operating temperature of -50°C allows this product to function effectively in cold environments, making it versatile for a wide range of temperature sensing tasks.
Being an NTC (Negative Temperature Coefficient) thermistor, this product exhibits a decrease in resistance with an increase in temperature, offering precise temperature measurement capabilities.
With a tolerance of 1%, this product provides accurate and reliable temperature readings, ensuring consistent performance in temperature control systems.
The through hole mounting type facilitates easy installation on PCBs, enhancing the overall usability and compatibility of this product with different electronic circuits.
The low power dissipation rating of 0.0035 W ensures energy-efficient operation and prevents overheating, making this product a cost-effective and reliable choice for temperature sensing applications.
Non-linear Resistors 103JT-025 attributes and parameters. Explore more Non-linear Resistors devices from Semitec
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Sub-Category:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
103JT-025 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
EU2B-YS3203C
Surge Components
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Micropac Industries
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NTCLE100E3472HB0A
Vishay Intertechnology
Vishay Intertechnology's NTCLE100E3472HB0A is a 4700 ohm NTC thermistor with a thermal sensitivity index of 3977 K. It has a rated temperature range from -40 to 125 °C and is ideal for temperature sensing applications. The thermistor features radial terminal placement, matte tin finish, and through hole mounting.
B72214-S350-K101
TDK
The TDK B72214-S350-K101 is a VARISTOR with 10J energy capacity, 35V RMS voltage, and -40 to 85°C operating range. Ideal for surge protection in circuits with 45V operating voltage. RADIAL terminals and DISK PACKAGE make it suitable for THROUGH HOLE MOUNT applications.
NTC0805J5K0
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NTHS1206N01N1003JE
Vishay Intertechnology's NTHS1206N01N1003JE is a NTC thermistor with 100k ohm resistance, 5% tolerance, and 0.28W power dissipation. Ideal for temperature compensation applications, it operates b/w -40°C to 125°C with thermal sensitivity index of 3974K. This surface mount device features dual-ended terminals in a rectangular package.
RXEF185K
TE Connectivity's RXEF185K is a PTC thermistor with 0.19 ohm resistance and 72V operating voltage. It offers overload protection in applications, featuring radial terminal placement and disk package shape. With CSA, TUV, UL certifications, it operates b/w -40°C to 85°C temperatures.
NCP15XH103J03RC
Murata Manufacturing
Murata Manufacturing's NCP15XH103J03RC is a Non-linear Resistor with 10000 ohm resistance, 5% tolerance, and operating voltage of 5V. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type, -40 to 125 °C operating temperature range, and high thermal sensitivity index of 3380 K. The DUAL ENDED terminal placement and SMT package style make it suitable for SURFACE MOUNT installations in various electronic devices.
MF-GSMF300/36X-2
Bourns MF-GSMF300/36X-2 is a PTC resettable fuse with 0.01 ohm resistance, 36V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range of -40 to 85 °C and meets CUL, TUV, and UL standards.
B72520T0350K062
B72520T0350K062 by TDK is a VARISTOR with max. circuit RMS voltage of 35V and operating voltage of 45V. It has a max. energy absorption capacity of 0.4J, suitable for surge protection applications in electronics due to its dual-ended terminal placement and surface mounting type.
MF-USMF150-2
MF-USMF150-2 by Bourns is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
2920L200DR
Littelfuse
2920L200DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 15V, and max circuit DC voltage of 15V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and rectangular SMT package style.
RF1180-000
TE Connectivity's RF1180-000 is a PTC resettable fuse with 0.04 ohm resistance and 24V operating voltage. It features dual-ended terminals, SMT package style, and WRAPAROUND shape. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and rated power dissipation of 1W.
EZJZ1V220JA
The Panasonic EZJZ1V220JA is a VARISTOR resistor with DUAL ENDED terminals, suitable for SURFACE MOUNT applications. It has an operating voltage of 13V and can withstand temperatures from -40 to 85°C. The RECTANGULAR PACKAGE measures 1.6mm in length, 0.8mm in width and height, with TIN terminal finish.
1210L050YR
1210L050YR by Littelfuse is a PTC resettable fuse with resistance of 0.25 ohm, operating voltage of 13.2V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and rectangular package shape.
B57421V2103J062
The TDK B57421V2103J062 is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.21 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 3980 K and operating temperature range from -55 to 125 °C. The dual-ended rectangular package with SMT style makes it suitable for surface mount installations.
MINISMDC110F/24-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Height (Package): 1.46 mm;
PFMF.020.2
Schurter Ag
Schurter Ag's PFMF.020.2 is a PTC resettable fuse with resistance of 0.4 ohm, rated AC voltage of 30V, and operating temperature range from -40 to 85 °C. It is used for temperature sensing applications in surface mount installations with dual-ended terminals and wraparound shape.
NCP15XH103F03RC
Murata Manufacturing's NCP15XH103F03RC is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in RECTANGULAR PACKAGE.
RXEF110-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 0.15-0.25 OHMS AT 20 DEG CEL; Rated AC Voltage (URac): 72 V; Minimum Operating Temperature: -40 Cel;
1812L150/12DR
1812L150/12DR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, dual-ended terminals, and SMT package style. It is designed for overcurrent protection applications with a max operating temperature of 85°C and min of -40°C. This rectangular package thermistor has a compact size of 4.73mm x 3.41mm x 1.25mm for surface mounting method.
MF-SM100/33-2-99
The Bourns MF-SM100/33-2-99 is a PTC resettable fuse with 33V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in surface mount applications with dual-ended terminals in a rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
103JT-050
Semitec
The Semitec 103JT-050 is a non-linear resistor with a resistance of 10000 ohm and a thermal sensitivity index of 3435 K. It is used for temperature sensing applications, with a max operating temperature of 90°C and a min operating temperature of -50°C.
103JT-075
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .0035 W; Maximum Operating Temperature: 90 Cel; Tolerance: 1 %;
103JT-100
Semitec's 103JT-100 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3435 K. Ideal for temperature sensing applications, it has a max operating temp of 90°C and min of -50°C. Its radial terminal placement and rectangular package make it suitable for through hole mounting.
103JG1K
Us Sensor
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .002 W; Tolerance: 10 %; Packing Method: TR;
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 10 %; Thermal Sensitivity Index: 3892 K;
103JG1F
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 1 %; Diameter (Package): 1.905 mm;
103JF1F
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 1 %; Thermal Sensitivity Index: 3892 K;
103JF1G
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 2 %; Diameter (Package): 1.65 mm;
103JF1J
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 5 %; Thermal Sensitivity Index: 3892 K;
103JF1K
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 10 %; Thermistor Application: TEMPERATURE SENSING;
103JG1G
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 2 %; Diameter (Package): 1.905 mm;
103JG1J
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 5 %; Terminal Finish: TIN;
103JG1KE
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Tolerance: 10 %; Package Style (Meter): Axial;
103JL1A
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; JESD-609 Code: e3; Diameter (Package): 1.905 mm;
103JM1A
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 300 Cel; Terminal Placement: AXIAL; Diameter (Package): 1.905 mm;
103JT-025A
103JT-050A
103JT-075A
103JT-100A
103JT-V-020
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .008 W; Maximum Operating Temperature: 90 Cel; Tolerance: 1 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved