Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Supply Voltage: 2.5 V; Maximum Symmetry (%): 55/45; Power Supplies (V): 2.5;
Median Price
$7.560
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
1k+ parts
10k+ parts
Ampacity Inc.
$13.990
-
Perfect Parts
Fixed Clock SAW Oscillators EG-2121CA200.0000M-PHPAB attributes and parameters. Explore more Fixed Clock SAW Oscillators devices from Seiko Epson
Additional Features:
Maximum Fall Time:
Frequency Tolerance:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Compatibility:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Since its inception, Epson has passed down and expanded on its traditional strengths as a manufacturing company. Refining the company's super-microprocessing and precision processing technologies in the development of its watches and then expanding those technologies into other fields led to rapid progress. The breakthrough came with the launch of the EP-101 (Electronic Printer), a popular and groundbreaking product that opened up new markets. It was in the hope of sending future "sons" of this EP out into the world that the Epson brand was founded in 1975. Ever since then, high quality, high-value-added "sons" have been introduced to the market to wide acclaim.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
XG-2102CA100.0000M-LGPALX
Seiko Epson
SAW OSCILLATOR; Terminal Finish: GOLD; JESD-609 Code: e4;
LMK6DA15552ADLET
LMK6DA15552ADLET by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 85 °C. It features LVDS Output Compatibility, operates from 1 MHz to 400 MHz, and is suitable for applications requiring precise timing in compact electronic devices.
LMK6HA10000ADLET
LMK6HA10000ADLET by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 85 °C. It has a Max Supply Voltage of 3.465 V and supports HCSL Output Compatibility. Ideal for applications requiring precise clock signals in the frequency range of 1-400 MHz, especially in compact electronic devices due to its small physical dimensions of 3.3mm x 2.6mm x 1.0mm and surface mounting feature.
EG-2102CA125.0000M-PHPAL3
EG-2102CA125.0000M-PHPAL3 by Seiko Epson is a Fixed Clock SAW Oscillator with 125 MHz frequency, 100 ppm tolerance, and LVPECL output. Ideal for applications requiring precise timing in a compact package, such as telecommunications equipment and networking devices.
LMK6PA15625ADLER
LMK6PA15625ADLER by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w 1 MHz to 400 MHz. It features LVPECL Output Compatibility and has a compact size of 3.3mm x 2.6mm x 1.0mm, making it ideal for applications requiring precise timing in electronic devices.
EG-2102CA125.0000M-PHPA
EG-2102CA125.0000M-PHPA by Seiko Epson is a Fixed Clock SAW Oscillator with 125 MHz nominal frequency, 3.3V supply voltage, and ceramic package material. It operates b/w 100-700 MHz range, suitable for applications requiring precise timing in temperature range of 0-70°C. Ideal for surface mount installations with low power consumption at 100mA max supply current.
EG-2102CA125.0000M-PHPAL0
EG-2102CA125.0000M-PHPAL0 by Seiko Epson is a Fixed Clock SAW Oscillator with a frequency tolerance of 100 ppm and operates at a nominal frequency of 125 MHz. It has a compact physical dimension of 7.0mm x 5.0mm x 1.2mm, making it suitable for applications requiring precise timing in electronic devices such as networking equipment and telecommunications systems.
LMK6HA10000BDLFT
LMK6HA10000BDLFT by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 85 °C. It has a Max Supply Voltage of 1.89 V and supports HCSL Output Compatibility. Ideal for applications requiring precise clock signals in compact designs.
EG-2121CA125.0000M-LHPAL3
Seiko Epson's EG-2121CA125.0000M-LHPAL3 is a Fixed Clock SAW Oscillator with 6 terminals, operating at frequencies from 53.125 MHz to 700 MHz. It has a ceramic package body, operates at 2.5V, and consumes up to 30mA of current. Ideal for applications requiring precise timing in temperature range of 0°C to 70°C.
PLMK6CE02400CDLET
PLMK6CE02400CDLET by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 105 °C. It features LVCMOS Output Compatibility, suitable for applications requiring frequencies from 1 MHz to 200 MHz in compact designs. The package body material is PLASTIC/EPOXY, making it ideal for surface mount installations.
PLMK6CE02400CDLFT
The Texas Instruments PLMK6CE02400CDLFT is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 105 °C. It has LVCMOS Output Compatibility, suitable for applications requiring frequencies from 1 MHz to 200 MHz in compact designs due to its small physical dimensions of 2.6mm x 2.1mm x 1.0mm.
BS-125.000MBC-T
Txc
SAW OSCILLATOR;
LMK6DA12288ADLET
LMK6DA12288ADLET by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 85 °C. It has LVDS Output Compatibility, operates from 1 MHz to 400 MHz, and comes in a compact package of 3.3mm x 2.6mm x 1.0mm for surface mount applications.
EG-2121CA125.0000M-PGPAL3
EG-2121CA125.0000M-PGPAL3 by Seiko Epson is a Fixed Clock SAW Oscillator with 6 terminals, operating at frequencies from 53.125 MHz to 500 MHz. It has a ceramic package body, gold terminal finish, and operates b/w 0°C to 70°C. Ideal for applications requiring precise timing in electronic devices.
LMK6CE15625DDLFR
LMK6CE15625DDLFR by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance and LVCMOS Output Compatibility. It operates b/w -40 to 105 °C, suitable for applications requiring precise timing in compact designs. With dimensions of 2.6mm x 2.1mm x 1.0mm, it's ideal for surface mount installations in various electronic devices.
LMK6DA15552ADLER
LMK6DA15552ADLER by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 85 °C. It features LVDS Output Compatibility, operates from 1 MHz to 400 MHz, and is ideal for applications requiring precise timing in compact electronic devices.
PLMK6CE02500CDLFT
PLMK6CE02500CDLFT by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 105 °C. It features LVCMOS Output Compatibility, suitable for applications requiring precise timing in compact designs up to 200 MHz frequency range.
LMK6HA10000ADLER
LMK6HA10000ADLER by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w -40 to 85 °C. It has a Max Supply Voltage of 3.465 V and supports HCSL Output Compatibility. Ideal for applications requiring precise clock synchronization in electronic devices within the frequency range of 1-400 MHz.
LMK6HA10000BDLFR
LMK6HA10000BDLFR by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating from 1.71V to 1.89V. With a frequency range of 1MHz to 400MHz, it's ideal for applications requiring precise timing such as telecommunications and networking equipment.
LMK6PA15625ADLFT
LMK6PA15625ADLFT by Texas Instruments is a Fixed Clock SAW Oscillator with 25 ppm Frequency Tolerance, operating b/w 1 MHz to 400 MHz. It features LVPECL Output Compatibility and has a compact size of 2.6mm x 2.1mm x 1.0mm, making it suitable for applications requiring precise timing in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved