Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Schurter Ag 8020.5083 fuse, with a rated current of 32A and very fast blow characteristic, is ideal for circuit protection in applications requiring a max operating temperature of 85°C. With a nominal joule integral of 4750J and rated AC voltage of 440V, it offers reliable performance in various electronic systems. This fuse has dimensions of 6.35mm x 31.8mm and meets reference standards CUL and UL for quality assurance.
Median Price
$2.308
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.210
100+ parts
$1.550
1k+ parts
$0.989
10k+ parts
$0.816
Master Electronics
-
$2.406
$1.026
$0.880
Verical
$3.078
$1.382
Chip1Stop
$0.884
$0.881
Nova Conductors
$1.018
TME
$1.680
$1.220
$0.940
$0.780
Electro Sonic
$1.122
$0.853
$0.763
Vyrian
IBS Electronics
$3.498
$1.492
$1.280
VNN
Bastille Electronics
$0.967
$0.919
$0.906
The high joule integral indicates that this fuse can handle large amounts of energy, making it a reliable choice for protecting electrical circuits.
With a high rated AC voltage, this fuse is suitable for use in applications where higher voltage levels are present, providing effective circuit protection.
The high rated current capacity of 32 A ensures that this fuse can safely handle higher levels of current flow, protecting against overloads and short circuits.
The fuse's ability to operate at temperatures up to 85°C makes it suitable for use in a variety of environments without risk of failure due to overheating.
With a high breaking capacity of 1500 A, this fuse can safely interrupt high fault currents, ensuring the protection of the electrical circuit and connected equipment.
Being an electric fuse, this product offers reliable circuit protection by quickly interrupting the flow of current in the event of a fault, preventing damage to the circuit and connected devices.
Fuses 8020.5083 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
8020.5083 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FNQ-R-1-1/4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
FNQ-R-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
3410.0035.01
Schurter Ag
Schurter Ag's 3410.0035.01 fuse is a 1206 size with 2A current rating, suitable for electric circuit protection at 125V AC/DC. It has super-fast blow characteristic, rated breaking capacity of 50A, and operates b/w -55°C to 150°C. Ideal for surface mount applications requiring high joule integral (0.089 J) fuses.
FWP-600A
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE;
LPJ-70SPI
Eaton Corporation
The Eaton LPJ-70SPI fuse, rated at 70A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 28.6mm x 66.7mm, it is suitable for inline mounting applications requiring electric circuit protection. This fuse has a high breaking capacity of 300kA and built-in indicator feature, meeting CE, CSA, and UL standards.
0297010.WXNV
Littelfuse
Littelfuse 0297010.WXNV is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and dimensions of 10.9mm x 3.8mm x 8.8mm, suitable for inline mounting applications requiring electric circuit protection up to 1000A breaking capacity.
37215000411
Littelfuse 37215000411 fuse has a rated current of 5A, trip time of 0.02s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a time lag blow characteristic at rated AC voltage of 250V.
0218016.MXP
0218016.MXP by Littelfuse is a 5x20mm electric fuse with a rated current of 16A and a trip time of 0.02s. It has a max operating temperature of 125°C and is commonly used for circuit protection in various applications.
FWP-50A14F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 50 A; Terminal Shape: END CAP;
BK/ABC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: END CAP;
FNQ-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Fuse Size: MIDGET;
FNQ-R-4-1/2
Eaton Corporation's FNQ-R-4-1/2 fuse, rated at 4.5A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
0437.250WR
Littelfuse 0437.250WR is a fast-acting electric fuse with 0.25A rated current and 125V rated voltage. It has a trip time of 5 seconds, making it suitable for circuit protection in applications requiring quick response to overcurrent conditions. With dimensions of 3.2mm x 1.63mm x 0.82mm, this surface mount fuse is ideal for use in electronic devices where space is limited.
3413.0114.22
Schurter Ag's 3413.0114.22 fuse is a 1206 size with 0.75A rated current and 32V AC voltage, suitable for electric circuit protection in various applications. With a very fast blow characteristic and gold nickel terminal finish, it offers high reliability with a rated breaking capacity of 50A and pre arcing rating of 0.05 A2/s.
BK/MDL-5-R
BK/MDL-5-R by Cooper Electronic Technologies is a 5A time delay electric fuse with a rated AC voltage of 250V. It has a nominal joule integral of 32J and a rated breaking capacity of 200A. This fuse is commonly used for circuit protection in applications requiring inline mounting or holder installation.
ATM20
Mersen S A
The Mersen S A ATM20 fuse is a 20A fast blow electric fuse with 600V AC/DC rated voltage and 100kA breaking capacity. It comes in midget size, measures 10mm x 38mm, and has end cap terminals. Ideal for inline mounting applications requiring reliable circuit protection.
170M3744
The Eaton Corporation 170M3744 fuse offers 5150J nominal joule integral and 1300V rated AC/DC voltage for circuit protection. With a rated current of 200A and breaking capacity of 100kA, it is ideal for inline mounting in various applications requiring high-level electrical protection.
BK/MDL-2-R
BK/MDL-2-R by Cooper Electronic Technologies is a 250V, 2A electric fuse with a rated breaking capacity of 100A. Featuring time delay blow characteristic and nickel terminal finish, it is ideal for inline mounting applications. With dimensions of 6.35mm x 31.75mm, this fuse offers circuit protection per CSA and UL standards in various electronic devices.
KTK-1/2
Eaton Corporation's KTK-1/2 fuse, rated at 500V AC/0.5A, features fast blow characteristic and nickel terminal finish. With a compact size of 10.3mm x 38.1mm, it is ideal for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CE, CSA, and UL standards, it comes in a box packing method for easy installation.
PTS120660V005
Eaton Corporation's PTS120660V005 fuse has a trip time of 1.5s, rated voltage of 60V, and resistance of 50Ω. It is used for electric circuit protection in applications requiring fast blow characteristic and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8020.0608.H.PT
Schurter Ag's 8020.0608.H.PT fuse, rated at 40A and 250V AC, offers a time lag blow characteristic with a nominal joule integral of 5867J. Ideal for circuit protection in applications requiring a through-hole mounting feature and high breaking capacity up to 500A.
8020.5022
Schurter Ag's 8020.5022 fuse, rated at 12.5A and 400V, features a time lag blow characteristic with a nominal joule integral of 710J. Ideal for circuit protection in applications requiring an electric fuse with dimensions of 6.3x32mm and operating temperatures ranging from -40 to 85°C.
8020.5078
The Schurter Ag 8020.5078 fuse is a 6.3x32mm electric fuse with a rated current of 10A and a max operating temperature of 85°C. It has a blow characteristic of VERY FAST and is suitable for circuit protection in applications such as inline/holder mounting in UL and CUL reference standards.
8020.5021
Schurter Ag's 8020.5021 fuse, rated at 10A and 500V, offers a time lag blow characteristic with a nominal joule integral of 700J. Ideal for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 1500A and operating temperatures ranging from -40°C to 85°C.
8020.5024
The Schurter Ag 8020.5024 fuse is a 6.3x32mm electric fuse with a rated current of 20A and rated AC voltage of 400V, suitable for circuit protection in various applications. With a nominal joule integral of 4000J and blow characteristic as time lag, it offers reliable performance with a rated breaking capacity of 1500A. This fuse operates within temperatures ranging from -40°C to 85°C, meeting CUL and UL standards for quality assurance.
8020.5024.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 63 V; Rated Current: 20 A; Terminal Shape: END CAP;
8020.5073.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 500 V; Rated DC Voltage: 400 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE;
8020.5073
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 400 V; Rated Current: 3.15 A; Terminal Shape: END CAP;
8020.0603.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 12 A; Terminal Shape: PIN WIRE; Minimum Pre Arcing Time: 5000 ms;
8020.0603
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 12 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.8mm;
8020.0603.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 12 A; Terminal Shape: END CAP; Minimum Operating Temperature: -40 Cel;
8020.0603.H
Schurter Ag's 8020.0603.H fuse is a 3AG size with a rated current of 12A and max operating temperature of 85°C. It is commonly used for circuit protection in applications such as inline/holder mounting in electrical systems.
8020.0603.H.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 100 V; Rated Current: 12 A; Terminal Shape: PIN WIRE;
8020.0603G
8020.2090
Schurter Ag 8020.2090 fuse, rated at 10A and 1000V, with a breaking capacity of 20kA. Suitable for electric circuit protection in UL-standard applications. Measures 10.3x38mm with a body height of 38.9mm and operates b/w -40 to 125°C temperatures.
8020.5026.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 63 V; Rated Current: 32 A; Terminal Shape: END CAP;
8020.5080
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 400 V; Rated Current: 16 A; Terminal Shape: END CAP;
8020.5080.G
8020.0517.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: WIRE; Minimum Pre Arcing Time: 20 ms;
8020.5075.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 400 V; Rated Current: 5 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved