Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag's 8020.0603 fuse, rated at 12A and 250V AC, features a time lag blow characteristic with a nominal joule integral of 72J. With dimensions of 6.35mm x 31.8mm, it is used for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 500A and min pre-arcing time of 5000ms.
Median Price
$1.420
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.570
100+ parts
$0.460
1k+ parts
$0.430
10k+ parts
-
Element14
$1.179
Mouser Electronics
$1.660
$1.160
$0.892
$0.760
Farnell
$1.720
$1.000
$0.770
$0.755
DigiKey
$2.000
$1.169
$0.893
$0.739
Newark
$0.999
Nova Conductors
$0.682
VNN
Vyrian
Schukat
$0.566
$0.493
$0.470
Semicontronic
$0.484
$0.472
$0.469
Argo Parts USA
$0.662
Continental Prestige Electronics
$1.180
$0.834
Glotronic Ltd.
Provides high level of protection against power surges and electrical faults, ensuring safety of equipment and devices.
Suitable for use in most common electrical systems and appliances, offering versatile protection.
Compact size allows for easy installation in various applications without taking up too much space.
Able to handle moderate to high current loads, providing reliable circuit protection in different scenarios.
Can withstand high temperatures without compromising performance, ensuring durability in diverse environments.
Versatile mounting options make it easy to integrate into different setups, enhancing flexibility during installation.
Fuses 8020.0603 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
8020.0603 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Temic Semiconductors
DS18B20Z/T&R
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
0452001.MRL
Littelfuse
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
0451.500MRL
Littelfuse 0451.500MRL Nano fuse with 0.5A current rating, 125V DC/AC voltage, and 50A breaking capacity. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm for surface mount applications. Reference standards include CSA, CUL, and UL certifications.
FNQ-10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-7
Eaton Corporation
FNQ-7 fuse by Eaton Corp, rated 7A & 500V, with time delay blow characteristic. MIDGET size, CC class fuse with 10.3mm x 38.1mm dimensions for inline mounting applications in CE/CSA/UL compliant circuits.
AJT60N
Mersen S A
AJT60N fuse by Mersen S A is a 60A, time delay electric fuse with 600V AC and 400V DC ratings. With a body length of 27mm and height of 60mm, it features an end cap terminal shape. Ideal for inline mounting applications, it has a high breaking capacity of 200kA and complies with CSA, IEC, and UL standards.
FNQ-12
FNQ-12 fuse by Eaton Corporation is a 12A MIDGET fuse with TIME DELAY blow characteristic. Rated for 500V AC/DC, it has a breaking capacity of 10kA. Ideal for circuit protection in various applications like industrial machinery and electrical equipment.
0697-3150-01
Bel Fuse
Bel Fuse 0697-3150-01 is a MICRO fuse with 3.15A rated current and 250V AC voltage. With a nominal joule integral of 58J, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature.
0297030.WXNV
Littelfuse 0297030.WXNV is a MINI fuse with 30A rated current, 1230J nominal joule integral, and 0.03s trip time. Ideal for electric circuit protection in automotive applications due to its compact size (10.9mm x 3.8mm x 8.8mm) and high breaking capacity of 1000A at rated voltage of 32V.
ATDR5-6/10
ATDR5-6/10 by Mersen S A is a 5.6A time delay electric fuse with 600V AC and 300V DC ratings. Featuring a 10.4mm x 38.1mm body, it has a high breaking capacity of 200kA. Ideal for inline mounting, it meets CSA and UL standards for circuit protection applications.
JJS-500
The Eaton Corporation JJS-500 fuse, rated at 600V and 500A, features a very fast blow characteristic with a breaking capacity of 200kA. With TAB/BLADE terminals and dimensions of 101.2mm x 45.2mm, it is commonly used for electric circuit protection in various applications meeting CE, CSA, and UL standards.
LP-CC-1-6/10
Eaton LP-CC-1-6/10 fuse, rated 1.6A and 600V AC, features time delay blow characteristic. With a compact body size of 10x38.1mm, it is ideal for electric circuit protection in various applications. Compliant with CE, CSA, and UL standards, suitable for inline mounting in holders.
ATDR2-8/10
The Mersen S A ATDR2-8/10 fuse is rated for 600V AC and 300V DC with a current rating of 2.8A. Featuring time delay blow characteristic, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
0468001.NR
Littelfuse 0468001.NR fuse, rated at 63V and 1A, with trip time of 0.0015s. Ideal for circuit protection in electronics due to slow blow characteristic and compact size of 3.18mm x 1.52mm x 0.58mm. Compliant with CSA and UL standards for reliable performance in various applications.
CCMR002.TXP
Littelfuse CCMR002.TXP fuse, rated 2A/600V, features time delay blow characteristic. With 200kA breaking capacity, it's ideal for electric circuit protection in CE/CSA/UL compliant applications. Sized at 10.3mm x 38.1mm, it fits inline or holder mounting methods efficiently.
LP-CC-2-8/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.8 A; Terminal Shape: END CAP;
ATQR1
The Mersen S A ATQR1 fuse is rated for 600V AC with a 1A current and time delay blow characteristic. It has a body length of 10.4mm, diameter of 38.1mm, and end cap terminal shape. Suitable for inline mounting applications, it offers circuit protection with a high breaking capacity of 200kA at up to 80°C temperature.
BK/ATC-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
0ATO020.V
0ATO020.V fuse by Littelfuse has a rated current of 20A, trip time of 0.1s, and nominal joule integral of 520J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and min operating temperature of -40°C. The fuse features TAB/BLADE terminals and a rated breaking capacity of 1000A.
LP-CC-6
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
LPJ-100SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8020.0608.H.PT
Schurter Ag
Schurter Ag's 8020.0608.H.PT fuse, rated at 40A and 250V AC, offers a time lag blow characteristic with a nominal joule integral of 5867J. Ideal for circuit protection in applications requiring a through-hole mounting feature and high breaking capacity up to 500A.
8020.5022
Schurter Ag's 8020.5022 fuse, rated at 12.5A and 400V, features a time lag blow characteristic with a nominal joule integral of 710J. Ideal for circuit protection in applications requiring an electric fuse with dimensions of 6.3x32mm and operating temperatures ranging from -40 to 85°C.
8020.5078
The Schurter Ag 8020.5078 fuse is a 6.3x32mm electric fuse with a rated current of 10A and a max operating temperature of 85°C. It has a blow characteristic of VERY FAST and is suitable for circuit protection in applications such as inline/holder mounting in UL and CUL reference standards.
8020.5021
Schurter Ag's 8020.5021 fuse, rated at 10A and 500V, offers a time lag blow characteristic with a nominal joule integral of 700J. Ideal for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 1500A and operating temperatures ranging from -40°C to 85°C.
8020.5024
The Schurter Ag 8020.5024 fuse is a 6.3x32mm electric fuse with a rated current of 20A and rated AC voltage of 400V, suitable for circuit protection in various applications. With a nominal joule integral of 4000J and blow characteristic as time lag, it offers reliable performance with a rated breaking capacity of 1500A. This fuse operates within temperatures ranging from -40°C to 85°C, meeting CUL and UL standards for quality assurance.
8020.5024.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 63 V; Rated Current: 20 A; Terminal Shape: END CAP;
8020.0603.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 12 A; Terminal Shape: PIN WIRE; Minimum Pre Arcing Time: 5000 ms;
8020.0603.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 12 A; Terminal Shape: END CAP; Minimum Operating Temperature: -40 Cel;
8020.0603.H
Schurter Ag's 8020.0603.H fuse is a 3AG size with a rated current of 12A and max operating temperature of 85°C. It is commonly used for circuit protection in applications such as inline/holder mounting in electrical systems.
8020.0603.H.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 100 V; Rated Current: 12 A; Terminal Shape: PIN WIRE;
8020.0603G
8020.5026.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 63 V; Rated Current: 32 A; Terminal Shape: END CAP;
8020.0517.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: WIRE; Minimum Pre Arcing Time: 20 ms;
8020.0605
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 20 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
8020.0606
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 31.8 mm;
8020.0604.H
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 100 V; Rated Current: 15 A; Terminal Shape: END CAP;
8020.0603.H.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 100 V; Rated Current: 12 A; Terminal Shape: END CAP;
8020.0604.H.G
8020.0608.H.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 80 V; Rated Current: 40 A; Terminal Shape: END CAP;
8020.0609.H.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 70 V; Rated Current: 50 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved