Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER); Height: 12.6 mm;
Median Price
$0.628
Lifecycle Status
Suppliers In-Stock
63
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.203
100+ parts
$0.185
1k+ parts
$0.166
10k+ parts
-
Bürklin Elektronik
$0.670
$0.510
Chip1Stop
$0.880
Distrelec
$0.989
$0.750
Mouser Electronics
$1.850
$0.933
$0.759
Newark
$1.980
TTI
$0.498
$0.457
TTI Europe
$0.540
$0.509
Farnell
$0.887
$0.643
Element14
$0.886
$0.639
Master Electronics
$0.491
$0.446
Verical
$0.577
$0.560
Future Electronics
$0.585
$0.565
Arrow
$0.561
$0.490
DF Sales Co.
$0.260
Nova Conductors
$0.956
Maritex
$1.202
$0.581
TME
$1.600
$0.684
$0.648
Chip Stock
Microfarads
NAC Semi
$1.180
Component Sense
Vyrian
Bristol Electronics
$0.507
$0.379
$0.352
IBS Electronics
$0.688
$0.625
Holdelec - ElecDif-Pro
Electro Sonic
$0.629
$0.556
Prism Electronics
Semi Source
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Sea View Technologies
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
LIBRA Elektronik GmbH
VNN
Schukat
$0.746
Pegasus Components GmbH
Martec Srl
A&K Electronics
Rotakorn
J & M Industries LLC
Ashlea Components Ltd
Connect4Technologies Inc.
Q Components
PC Components Company LLC
Vicor Industries, Inc.
Flex Direct, LLC
Speed Components Ltd
Contempo Components LLC
Bas Electronics GmbH & Co. KG
First Choice Components Inc.
Elcom Components
Classic Components Corporation
Diverse Electronics
Pride Electronics
NPI Materials, Inc.
A2Z Electronics, Inc.
Electronics Depot
LWI Electronics Inc
Corohmni
$0.050
Semicontronic
$0.173
$0.169
$0.168
Advanced Electronics
Aztec Data Supply Inc.
$0.424
Argo Parts USA
$0.733
Bastille Electronics
$0.908
$0.863
$0.851
Perfect Parts
Speed Components Ltd (Excess)
Legend Electronics Inc. (Excess)
GreenTree Electronics
$0.797
A-Z Elektronik GmbH
Kepictronics
Continental Prestige Electronics
$0.589
Eastek
Assy Fe
Cyclops Electronics Ltd (Excess)
Fixed Capacitors 16SVP330M attributes and parameters. Explore more Fixed Capacitors devices from Sanyo Electronic Devices (Components)
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Width:
16SVP330M Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - OS-CON 11/Dec/2018 Multiple Devices Bag 25/Aug/2016
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Components
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
EU2B-YS303C
Idec
ROTARY SWITCH;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM358DT
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
C1825C561KZGALTU
KEMET Corporation
C1825C561KZGALTU by KEMET Corp is a ceramic capacitor with 0.00056uF capacitance, 2500V URdc, and C0G temp characteristics. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Offers a temp coef of 30ppm/°C and operates b/w -55 to 125 °C.
T491B105K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL10B104KO8NNNC
Samsung Electro-mechanics
CL10B104KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for SMT applications requiring compact size and high reliability.
C1608X5R1A226M080AC
TDK
TDK C1608X5R1A226M080AC is a ceramic capacitor with 22uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for SMT applications due to its small size (1.6x0.8x0.8mm) and high temp range (-55 to 85°C).
C0805C102J5GACTU
The KEMET Corporation C0805C102J5GACTU is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 50V. With a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for applications requiring stable performance in varying temperatures. Its SMT package style and compact dimensions make it suitable for surface mount designs in various electronic devices.
EEUFR0J222
Panasonic
Panasonic EEUFR0J222 is a 2200uF, 6.3V Aluminum Electrolytic Capacitor with 0.26 Tan Delta and 1744mA Ripple Current. Ideal for applications requiring high capacitance and low leakage current in cylindrical package design.
CL10A475KQ8NNNC
Samsung Electro-mechanics CL10A475KQ8NNNC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C0603C225K8PACTU
KEMET Corporation's C0603C225K8PACTU is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CGA5L1X7R1V106K160AC
TDK's CGA5L1X7R1V106K160AC is a 1206 SMT ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.
UWT1V221MNL1GS
Nichicon
The Nichicon UWT1V221MNL1GS is a 220uF aluminum electrolytic capacitor with a rated DC voltage of 35V. It features a tan delta of 0.14, leakage current of 0.077mA, and ripple current of 190mA, making it ideal for automotive applications meeting AEC-Q200 standards.
C0402C473K4RACAUTO
KEMET C0402C473K4RACAUTO is a ceramic capacitor with 0.047uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and matte tin terminal finish.
M39006/22-0350
Vishay Intertechnology
Vishay Intertechnology's M39006/22-0350 is a TANTALUM CAPACITOR with 47uF capacitance, 50V URdc, and 0.11 Tan Delta. Ideal for MIL-PRF-39006/22 applications, it operates b/w -55 to 125 °C with a leakage current of 0.001 mA.
UUX2A470MNL1GS
Nichicon UUX2A470MNL1GS is a 47uF aluminum electrolytic capacitor with 100V URdc. It features low tan delta of 0.08 and high ripple current of 230mA, suitable for automotive applications meeting AEC-Q200 standard.
GRM32ER71E226KE15L
Murata Manufacturing
Murata Manufacturing's GRM32ER71E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
VJ0603Y104KXACW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
BFC233814104
Vishay Intertechnology BFC233814104 is a film capacitor with 0.1 uF capacitance, rated for 440 V AC and 1000 V DC. Ideal for applications requiring high voltage tolerance, it features polypropylene dielectric material and operates b/w -50 to 105 °C. Suitable for use in various electronic circuits due to its radial package style and through hole mount feature.
VJ0805Y104KXATW1BC
Vishay Intertechnology's VJ0805Y104KXATW1BC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
T491C106K025AT
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CGA2B2X7R1E103K050BA
TDK's CGA2B2X7R1E103K050BA is a ceramic capacitor with capacitance of 0.01uF, rated at 25V DC. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
GRM31CR71H475KA12L
Murata Manufacturing's GRM31CR71H475KA12L is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and high reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
16SVPC100M
16SVPC100M by Panasonic is a 100uF ALUMINUM ELECTROLYTIC CAPACITOR with 16V URdc. It features Tan Delta of 0.12, Leakage Current of 0.3mA, and ESR of 23mohm. Ideal for applications requiring compact SMT capacitors with high ripple current handling capabilities up to 124.5mA.
Sanyo Electronic Devices (Components)
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER); Size Code: 2926;
Sanyo Electric
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
16SVPF1000M
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 1000 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Negative Tolerance: 20 %;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
16SVPE470M
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 470 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Positive Tolerance: 20 %;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
16SVP22M
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER); Package Style (Meter): SMT;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
Panasonic 16SVP22M is a 22uF, 16V aluminum electrolytic capacitor with solid polymer dielectric material. It features low tan delta of 0.1 and high ripple current of 53mA, suitable for surface mount applications in electronics requiring stable capacitance at temperatures ranging from -55 to 105°C.
16SVPG270M
Panasonic 16SVPG270M is a surface mount aluminum electrolytic capacitor with 270uF capacitance and 16V rated DC voltage. It features low ESR of 8mohm, tan delta of 0.12, and ripple current of 290mA. Ideal for applications requiring compact size and high reliability in electronic circuits.
16SVP330M
Panasonic 16SVP330M is a fixed capacitor with 330uF capacitance and 16V rated DC voltage. It features aluminum solid polymer dielectric material, 0.15 Tan Delta, and 236mA ripple current. Ideal for surface mount applications in electronics requiring reliable performance at temperatures ranging from -55 to 105°C.
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
16SVP100M
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER); Width: 10.3 mm;
16SVPC39M
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 39 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
16SVPF560M
Panasonic 16SVPF560M is a SMT aluminum electrolytic capacitor with 560uF capacitance and 16V URdc. It features low ESR of 14mohm, -55 to 105 °C operating temp range, and polarized polarity. Ideal for applications requiring high ripple current handling in compact spaces like power supplies and voltage regulators.
16SVP3R3M
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 3.3 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved