Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec ZW-10-13-G-D-882-216 is a 2-row, 20-contact board stacking connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 1" x 0.296" x 0.882". Ideal for PCB applications, this male connector uses solder termination and phosphor bronze contacts.
Median Price
$3.526
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Sager
1+ parts
$3.350
100+ parts
$2.540
1k+ parts
$1.940
10k+ parts
-
Powell Electronics
$2.270
Samtec
$2.821
$1.990
$1.159
Newark
$4.260
$3.410
$2.450
$2.200
DigiKey
$6.420
Nova Conductors
$2.135
Vyrian
Corohmni
Continental Prestige Electronics
$2.092
Argo Parts USA
Netroflash
$2.028
$1.986
AZTECH Wire
$8.328
Aztec Data Supply Inc.
$8.890
The close proximity of mating contacts allows for efficient and reliable signal transmission.
Standard body length for easy integration into various electronic devices.
Narrow body width saves space and allows for dense PCB layouts.
Gold over nickel finish ensures excellent conductivity and corrosion resistance.
Sufficient body depth for secure mounting and stability on the PCB.
Durable and high-quality insulator material for long-term reliability.
Double rows provide increased connectivity options for complex circuit designs.
Matching the number of PCB rows makes installation easier and more efficient.
Board stacking connector allows for vertical connections, saving valuable PCB space.
Phosphor bronze contacts offer excellent conductivity and durability.
Gold and nickel plating combination ensures superior performance and longevity.
Sleek black color adds a professional and aesthetically pleasing look to the connector.
Sufficient number of contacts for versatile connectivity options in electronic circuits.
Board mounting type for secure attachment and stability on the PCB.
Standard terminal pitch for compatibility with various electronic components.
Solder termination for reliable and durable connection to the PCB.
Male contacts are generally more robust and provide a secure connection.
Straight mounting style for easy installation and alignment on the PCB.
Square pin socket contact style for secure and stable connections.
Rectangular contact pattern allows for efficient signal transmission and alignment.
Headers & Edge Type Connectors ZW-10-13-G-D-882-216 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
ZW-10-13-G-D-882-216 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
EU2B-YS3303C
Idec
ROTARY SWITCH;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Promax-johnton
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
PHR-4
J S T Mfg
PHR-4 by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator material. It has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for applications requiring a polarized housing with 4 contacts in cable mounting setup.
746-010-520-606
Edac
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
22-27-2041
Molex 22-27-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features matte tin finish, 1500VAC dielectric voltage, and -40 to 105°C operating temperature range. With UL certification and red insulator color, it offers reliable connectivity for various electronic devices.
1-281742-0
TE Connectivity
TE Connectivity 1-281742-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and right angle mounting for various applications.
50-57-9405
The Molex 50-57-9405 header connector features a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 2200VAC. It is used in board connections with a total of 5 contacts, rated for 3A signal current, and operating temperatures ranging from -40 to +105°C.
M80-5102042
Harwin Plc
The Harwin PLC M80-5102042 is a 20-contact board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring a glass-filled polyphenylene sulfide insulator, it operates b/w -55°C to 125°C, ideal for commercial applications requiring durability and reliability in PCB connections.
BM06B-SRSS-TB(LF)(SN)
BM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male SQ PIN-SKT contacts in a polarized housing with surface mount termination.
DM3BT-DSF-PEJS
Hirose Electric
The Hirose Electric DM3BT-DSF-PEJS is a CARD EDGE CONNECTOR with 8 contacts, rated at 0.5A. It features a mating contact pitch of 0.043", insulation resistance of 1Gohm, and operates b/w -25°C to 85°C. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
VHR-4N-BK
BOARD CONNECTOR;
TMM-106-01-L-S
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
DM3AT-SF-PEJM5(42)
The Hirose Electric DM3AT-SF-PEJM5(42) PCB connector features a mating contact pitch of 0.043", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this right-angle male connector has a total of 8 contacts and operates b/w -25°C to 85°C with durability up to 10k cycles.
2023960407
Molex 2023960407 is a board connector with 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for applications requiring male connectors with right-angle mounting style and surface mount termination.
1-480699-0
AMPHENOL ICC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: ONE PIECE HOUSING; Minimum Operating Temperature: -55 Cel; Body or Shell Style: PLUG;
90814-0904
The Molex 90814-0904 header connector features a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". Ideal for board mounting with a max operating temperature of 105°C, it is commonly used in commercial applications requiring a rated current of 1.2A.
53047-0310
Molex 53047-0310 is a board connector with 3 contacts, 1.25mm terminal pitch, and 0.049" mating contact pitch. It features tin termination finish, white polyamide insulator, and UL94V-0 flammability rating. Ideal for commercial applications requiring a polarized housing with rectangular PCB contact pattern.
51103-0400
The Molex 51103-0400 is a board connector with 4 contacts, 0.098" pitch, and POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 105 °C, has a dielectric voltage of 1400VAC, and is UL94V-0 rated. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
357-074-442-278
Edac 357-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts in 2 rows, featuring a 0.156" pitch and rated for 5A signal current. With UL certification, it has a temperature range of -40 to 105°C, suitable for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
B4B-PH-K-S(LF)(SN)(PP)
B4B-PH-K-S(LF)(SN)(PP) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, Tin (Sn) finish, and 2mm terminal pitch. It is used in applications requiring headers & edge type connectors for board mounting with solder termination.
5055960801
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
BM04B-SRSS-TB(LF)(SN)
BM04B-SRSS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring tin over copper finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring a male contact gender and UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ZW-10-09-G-D-360-120
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; Contact Pattern: RECTANGULAR;
ZW-10-09-L-D-360-120-LL
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of PCB Rows: 2; Contact Material: PHOSPHOR BRONZE; Body Depth: .36 inch;
ZW-10-11-G-D-594-168
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD (10) OVER NICKEL (50); Total No. of Contacts: 20; Mixed Contacts: NO;
ZW-10-11-G-S-665-070
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2.54; No. of Rows Loaded: 1; Mounting Type: BOARD;
ZW-10-10-G-S-590-130
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: SQ PIN-SKT; Terminal Pitch (mm): 2.54; Total No. of Contacts: 10;
ZW-10-11-T-D-565-160
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Mating Contact Pitch (inch): 0.1; IEC Conformity: NO;
ZW-10-11-G-D-300-300
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; Body Depth: .3 inch;
ZW-10-20-G-D-656-237
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of PCB Rows: 2; Mating Contact Pitch (inch): 0.1; Mating Contact Finish: GOLD OVER NICKEL;
ZW-10-13-G-D-800-200
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Pitch (inch): 0.1; Mounting Style: STRAIGHT; Contact Material: PHOSPHOR BRONZE;
ZW-10-13-G-D-875-150
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mating Contact Pitch (inch): 0.1; Mounting Style: STRAIGHT;
ZW-10-13-G-D-846-072
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Pitch (inch): 0.1; Terminal Pitch (mm): 2.54; Total No. of Contacts: 20;
ZW-10-13-G-D-846-130-LL
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Body Width: .296 inch; Termination Contact Finish: Gold (Au);
ZW-10-13-G-D-846-133
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Terminal Pitch (mm): 2.54; Contact Material: PHOSPHOR BRONZE;
ZW-10-13-G-D-846-184
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Color: BLACK; DIN Conformance: NO; Body Length: 1 inch;
ZW-10-13-G-D-805-197
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2; Terminal Pitch (mm): 2.54;
ZW-10-13-G-D-825-115
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.54; Terminal Pitch (mm): 2.54;
ZW-10-13-G-D-842-188
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; UL Flammability Code: 94V-0;
ZW-10-13-G-D-842-200
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54;
ZW-10-13-G-D-880-150
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; MIL Conformity: NO;
ZW-10-13-G-D-896-055
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved