Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's MTLW-104-10-L-D-110 is a 2-row BOARD STACKING CONNECTOR with Tin (Sn) finish and Nickel (Ni) barrier. Featuring PHOSPHOR BRONZE contacts, GOLD OVER NICKEL mating finish, and 8 contacts with 2.54mm pitch, it's ideal for board mounting applications requiring male connectors in straight orientation.
Median Price
$0.728
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aranea Global
$0.713
$0.685
Corohmni
$0.717
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
$0.739
$0.702
Aztec Data Supply Inc.
$6.330
AZTECH Wire
$6.946
The Tin finish with Nickel barrier provides excellent corrosion resistance and ensures long-term reliability.
Having 2 rows loaded makes this connector suitable for applications that require a higher number of connections.
The board stacking connector design allows for convenient stacking of multiple boards, saving space and facilitating easy connection.
Phosphor bronze is known for its excellent electrical conductivity and durability, making it a reliable choice for connector contacts.
The gold finish over nickel ensures low contact resistance and maintains a stable connection over time.
With 8 contacts, this connector can accommodate multiple connections, making it versatile for various applications.
The board mounting type simplifies installation and ensures a secure attachment to the circuit board.
The 2.54mm terminal pitch provides compatibility with standard spacing requirements, allowing for easy integration into existing systems.
The solder termination type offers a reliable and durable connection method, ideal for applications where soldering is preferred.
The male contact gender is commonly used for plug connectors, providing a secure and stable connection.
The straight mounting style allows for a direct and simple installation process, ensuring proper alignment and connection.
Headers & Edge Type Connectors MTLW-104-10-L-D-110 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
MTLW-104-10-L-D-110 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WT
Yangzhou Yangjie Electronics
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Diotec Electronics
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Taiwan Semiconductor
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
502352-0200
Molex
The Molex 502352-0200 is a board connector with 2 contacts, featuring a mating contact pitch of 0.079" and insulation resistance of 1 Gohm. Ideal for commercial applications, it has a max operating temperature of 105°C and termination type of surface mount.
67910-5700
The Molex 67910-5700 is a card edge connector with 52 contacts, featuring gold over nickel termination finish. With a mating contact pitch of 0.031", it offers high insulation resistance of 500M ohm and withstands up to 300VAC dielectric voltage. Ideal for board mounting applications in commercial settings, this connector has a durability of 50 cycles and operates b/w -40°C to 80°C temperatures.
S4B-XH-SM4-TB(LF)(SN)
J S T Mfg
S4B-XH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and is ideal for surface mount applications in electronics for right angle mounting on boards.
09-65-2028
Molex 09-65-2028 is a board connector with 0.155" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage withstand. Ideal for commercial applications, this male connector features a straight mounting style and solder termination type for durability in temperatures ranging from -40 to 105 °C.
QSH-030-01-L-D-A-TR
Samtec
Samtec's QSH-030-01-L-D-A-TR is a 60-contact, 2-row stacking connector with 0.02" pitch. It features tin finish with nickel barrier, operates b/w -55°C to 125°C, and supports up to 1A signal current. Ideal for board-to-board applications requiring high reliability in commercial settings.
DF13-8S-1.25C
Hirose Electric
DF13-8S-1.25C by Hirose Electric is a 8-contact board connector with 0.049" pitch, rated at 1A signal current. It features polyamide insulation, withstands up to 500VAC, and operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
47553-0001
47553-0001 by Molex is a PCB connector with 0.1" pitch, gold over nickel finish, and 6 contacts. Ideal for commercial applications, it has a temperature range of -30 to 85°C and offers durability up to 2500 cycles.
DF11-10DP-2DSA(24)
DF11-10DP-2DSA(24) by Hirose Electric is a 10-contact, 2-row board connector with 0.079" pitch and 650VAC dielectric voltage. It features POLYAMIDE insulation, TIN finish, and operates b/w -30 to 85°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
B02B-PASK-1(LF)(SN)
B02B-PASK-1(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.079" pitch, suitable for PCB mounting with 800VAC dielectric voltage. Featuring glass-filled polybutylene terephthalate insulation and copper alloy contacts, it operates b/w -25 to 85°C, making it ideal for signal applications requiring up to 3A current.
B06B-PASK-1(LF)(SN)
B06B-PASK-1(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, suitable for applications requiring a rated current of 3A. Featuring a dielectric voltage of 800VAC and insulation resistance of 1Gohm, it has a temperature range from -25 to 85°C, making it ideal for various electronic devices.
B2B-PH-SM4-TBT(LF)(SN)
B2B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with TIN COPPER finish. Featuring 2 contacts, it has a 2mm terminal pitch and is ideal for surface mount applications. With UL 94V-0 flammability rating, this male connector is designed for straight mounting on boards.
746-064-520-601
Edac
Edac 746-064-520-601 is a 64-contact card edge connector with 0.125" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 1500VAC and insulation resistance of 5Gohm, making it ideal for applications requiring high reliability in temperatures ranging from -40 to 105°C.
53047-0510
Molex 53047-0510 is a board connector with 5 contacts, 1.25mm terminal pitch, and 0.09" terminal length. It features polarized housing, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
43025-1000
The Molex 43025-1000 is a board connector with 10 contacts arranged in S0P10 pattern. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it features a polyamide insulator, operates b/w -40 to 105°C, and has UL94V-0 flammability rating.
66506-322LF
Amphenol Communications Solutions
Amphenol's 66506-322LF is a 16-contact, 2-row board connector with a terminal pitch of 2.54mm and UL94V-0 flammability rating. It features male contacts for solder termination and straight mounting style, ideal for headers & edge type connectors in various electronic applications.
47352-1001
Molex 47352-1001 is a PCB connector with 0.043" pitch, GOLD finish, and 500VAC voltage rating. Ideal for board mounting applications in commercial settings, featuring liquid crystal polymer insulator and male contact gender. Operating temperature range from -20 to 85 °C with durability of 5000 cycles.
746-018-520-606
Edac 746-018-520-606 is a 2-row card edge connector with 18 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and can handle up to 3A signal current. Ideal for PCB applications requiring high reliability in temperatures ranging from -40°C to 105°C.
52271-0469
Molex 52271-0469 FFC/FPC connector with 0.039" pitch, 0.118" body width, and TIN finish is ideal for board mounting applications. Features include polyamide insulator, phosphor bronze contacts, and UL94V-0 flammability rating. Suitable for surface mount termination in commercial settings.
XF2M-3015-1A
Omron
Omron XF2M-3015-1A is a FFC/FPC connector with 30 contacts, gold termination finish, and 0.020" pitch. It has a durability of 20 cycles and operates b/w -30°C to 85°C. Ideal for board mounting applications requiring high reliability and signal currents up to 0.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MTLW-104-10-G-D-110
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2.54; Mating Contact Finish: GOLD OVER NICKEL; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
MTLW-104-10-S-D-110
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mounting Style: STRAIGHT; Manufacturer Series: MTLW;
MTLW-104-10-T-D-110
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN OVER NICKEL; JESD-609 Code: e3; Terminal Pitch (mm): 2.54;
MTLW-105-08-S-S-310
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Termination Type: SOLDER;
MTLW-116-07-G-D-265
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; UL Flammability Code: 94V-0;
MTLW-133-06-F-D-130
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; Mating Contact Finish: GOLD FLASH OVER NICKEL (50);
MTLW-140-24-S-S-310
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; JESD-609 Code: e3; Total No. of Contacts: 40;
MTLW-112-06-G-D-140
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; No. of Rows Loaded: 2;
MTLW-104-05-G-D-185
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel; Mounting Type: BOARD;
MTLW-112-06-G-D-125
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mixed Contacts: NO; MIL Conformity: NO;
MTLW-112-06-L-D-200
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 24; Terminal Pitch (mm): 2.54;
MTLW-112-06-T-D-125
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Filter Feature: NO; JESD-609 Code: e3;
MTLW-112-06-T-D-150
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 24; Mating Contact Pitch (inch): 0.1;
MTLW-104-05-L-S-200
Samtec's MTLW-104-05-L-S-200 is a 1-row, 4-contact board connector with a mating contact pitch of 0.1 inches. It has a body length of 0.4 inch and width of 0.098 inch, making it suitable for various applications requiring reliable connections in tight spaces.
MTLW-112-06-G-D-110
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD OVER NICKEL; Termination Type: SOLDER;
MTLW-116-08-T-S-375
MTLW-116-08-T-S-375 by Samtec is a 16-contact, straight-mounting, board stacking connector with a terminal pitch of 2.54mm. It features tin contact finish with a nickel barrier and is UL flammability code 94V-0 compliant. This connector is commonly used in applications requiring headers and edge type connectors for male contacts on circuit boards.
MTLW-112-06-G-S-060
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2.54; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Termination Type: SOLDER;
MTLW-112-06-G-S-120
Samtec's MTLW-112-06-G-S-120 is a 12-contact male board stacking connector with gold finish and nickel barrier. Featuring a terminal pitch of 2.54mm, it has UL 94V-0 flammability rating and solder termination. Ideal for board applications requiring reliable connections in tight spaces.
MTLW-112-06-L-S-120
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; Mating Contact Pitch (inch): 0.1;
MTLW-104-10-L-S-660
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Mounting Type: BOARD; Termination Contact Finish: NOT APPLICABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved