Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTMM-104-01-L-D-SM by Samtec is a 2-row, 8-contact board connector with a contact pitch of 0.078". Featuring liquid crystal polymer insulator and tin finish, it operates b/w -55 to 125°C. Ideal for applications requiring polarized housing and solder termination in black color.
Median Price
$3.040
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Argo Parts USA
Continental Prestige Electronics
$2.979
AZTECH Wire
$17.287
Netroflash
$2.888
$2.827
The tight contact pitch allows for a compact design, making this connector suitable for applications where space is limited.
The optimal body length ensures a secure and stable connection between the headers and edge connectors, reducing the risk of disconnection.
The tin finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term reliability of the connector.
The use of liquid crystal polymer insulator offers high heat resistance and durability, making the connector suitable for harsh operating conditions.
The high maximum operating temperature allows for reliable performance in applications where temperature fluctuations may occur.
The square pin/socket contact style ensures a secure and stable connection, preventing signal loss or interference.
Headers & Edge Type Connectors LTMM-104-01-L-D-SM attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Body Width:
Body Depth:
Body Length:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
LTMM-104-01-L-D-SM Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Eic Semiconductor
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
3-6318491-6
TE Connectivity
3-6318491-6 by TE Connectivity is a 2-row board connector with 220 contacts. Featuring a mating contact pitch of 0.02", it has an insulation resistance of 2M ohm and operates b/w -40 to 85°C. Ideal for commercial applications, this male plug connector offers a rated current of 0.5A and durability of 30 cycles.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BM04B-SRSS-G-TB(LF)(SN)
BM04B-SRSS-G-TB(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. Made of copper alloy, it has UL 94V-0 flammability rating and surface mount termination. Ideal for straight board mounting applications in electronics.
FTSH-107-01-L-DV-K-A-P-FR
Samtec
FTSH-107-01-L-DV-K-A-P-FR by Samtec is a 2-row, 14-contact board connector with a terminal pitch of 1.27mm. It features surface mount termination and a tin finish with nickel barrier. This connector is commonly used in applications requiring male contact gender and straight mounting style.
DF19-20S-1C
Hirose Electric
DF19-20S-1C by Hirose Electric is a 20-contact FFC/FPC connector with 0.039" pitch, 300VAC dielectric voltage, and -35 to 85°C operating range. Ideal for commercial applications, it features a polarized housing, bellowed contact design, and crimp termination for reliable signal transmission in cable assemblies.
307-074-422-212
Edac
Edac 307-074-422-212 is a CARD EDGE CONNECTOR with 74 contacts, 5A signal current rating, and 2545VAC dielectric voltage. It has a 0.156" pitch for PCB mating and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance.
DTM06-12SA-E007
TE Connectivity's DTM06-12SA-E007 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it handles up to 7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
831-43-030-30-002000
Mill-max Mfg
831-43-030-30-002000 by Mill-max Mfg is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 2mm and is for SURFACE MOUNT applications. This FEMALE SOCKET connector mounts STRAIGHT on the board.
5056
Aries Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Mounting Type: BOARD;
09-65-2028
Molex
Molex 09-65-2028 is a board connector with 0.155" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage withstand. Ideal for commercial applications, this male connector features a straight mounting style and solder termination type for durability in temperatures ranging from -40 to 105 °C.
501568-0607
The Molex 501568-0607 is a board connector with a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 350VAC. It is used in applications requiring a durable, right-angle mounting style for up to 30 cycles, ideal for commercial reliability standards.
ZHR-6
ZHR-6 by J S T Mfg is a 6-contact board connector with 0.059" pitch, suitable for applications requiring a polarized housing and crimp termination. With insulation resistance of 500M ohm and operating temperature range from -25 to 85°C, it offers reliable performance in various electronic setups. The UL-certified connector features a female contact gender and rectangular contact pattern, making it ideal for cable mounting scenarios.
0906.148.6901
Harting Electronics & Kg
0906.148.6901 by Harting Electronics & Kg is a 3-row, 48-contact board Euro connector with a mating contact pitch of 0.2". It features polarization key for polarized housing and rated current of 6A, suitable for commercial applications requiring reliable connections on PCBs with a spacing of 2.54mm b/w rows A, B, and C.
8-5353189-0
TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.
DF11-4DS-2C
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
FTSH-105-01-F-DV-K-A
Samtec's FTSH-105-01-F-DV-K-A is a 2-row, 10-contact board connector with a contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator. Ideal for commercial applications, it has a temperature range of -55 to 125°C and surface mount termination.
22-05-2041
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
71922-220LF
Amphenol Communications Solutions
Amphenol's 71922-220LF header connector features a 0.1" pitch, 2 rows with 20 contacts, and matte tin over nickel finish. Ideal for board connections in commercial applications, it offers high insulation resistance of 105M ohm and operates b/w -65°C to 125°C temperature range.
DF11-8DP-2DSA(01)
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTMM-104-01-F-D-SM-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2; Total No. of Contacts: 8; Mixed Contacts: NO;
LTMM-105-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Contact Finish: GOLD (30) OVER NICKEL (50); Termination Contact Finish: MATTE TIN OVER NICKEL;
LTMM-104-01-G-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.078; Insulator Color: BLACK;
LTMM-125-01-G-D-SM-LC
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
LTMM-107-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2;
LTMM-108-02-G-D-SM
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: LTMM; Mounting Style: STRAIGHT; Terminal Pitch (mm): 2;
LTMM-125-01-G-D
LTMM-104-02-F-D-SM-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 4.66; Termination Type: SOLDER;
LTMM-110-02-L-D-SM-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.078; Body Depth: .24 inch;
LTMM-110-02-L-D-SM-TR
Samtec LTMM-110-02-L-D-SM-TR is a 20-contact board connector with 0.078" pitch, ideal for surface mount applications. Featuring liquid crystal polymer insulator and phosphor bronze contacts with gold finish, it operates b/w -55°C to 125°C. With a compact body size of 0.873" x 0.237" x 0.19", it suits various PCB designs requiring high-density connections.
LTMM-120-01-T-D
LTMM-120-02-TM-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Filter Feature: NO; Mixed Contacts: NO;
LTMM-104-02-S-D-SM-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO; Filter Feature: NO;
LTMM-107-02-F-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.079;
LTMM-117-02-F-D-RA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
LTMM-104-02-F-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 2;
LTMM-105-02-L-D-SM
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
LTMM-110-02-F-D-SM
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125; Polarization Key: POLARIZED HOUSING;
LTMM-120-02-L-D
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: PHOSPHOR BRONZE;
LTMM-104-01-LM-D-RA-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; Terminal Pitch (mm): 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved