Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec ERF8-010-05.0-S-DV-TR is a 2-row, 20-contact board stacking connector with TIN over Nickel finish. Featuring Liquid Crystal Polymer insulator and Beryllium Copper contacts, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a rated current of 2.2A in PCB mounting setups.
Median Price
$5.235
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Farnell
1+ parts
$4.400
100+ parts
$3.210
1k+ parts
$3.190
10k+ parts
-
Chip1Stop
$4.640
Arrow
$4.731
$3.786
$3.393
Sager
$5.200
$4.160
$3.160
Powell Electronics
$4.161
$3.629
Mouser Electronics
$5.270
$4.430
$3.660
DigiKey
$6.500
$4.696
Element14
$6.710
$5.400
$5.370
Newark
$9.100
$7.270
$4.680
Verical
RS (Exports)
$5.360
$3.550
TME
$4.470
$4.040
$3.700
IBS Electronics
$4.184
Electro Sonic
$2.936
$2.822
A&K Electronics
Rotakorn
Bristol Electronics
Nova Conductors
Advanced Electronics
$3.417
$3.383
$3.247
Continental Prestige Electronics
$5.680
$4.490
$3.330
Argo Parts USA
Perfect Parts
Aranea Global
The small mating contact pitch allows for high density connection and efficient use of space on the PCB.
With a high maximum operating temperature, this connector can withstand harsh environmental conditions.
Beryllium copper offers excellent conductivity and durability, ensuring reliable signal transmission.
This connector can handle a high rated current for signal transmission, making it suitable for various applications.
Surface mount termination allows for easy and secure mounting on the PCB, saving assembly time and effort.
Headers & Edge Type Connectors ERF8-010-05.0-S-DV-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
ERF8-010-05.0-S-DV-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Daco Semiconductor
1888247-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Mounting Style: RIGHT ANGLE; Terminal Pitch (mm): .8;
1-281739-0
TE Connectivity
TE Connectivity 1-281739-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and is suitable for applications requiring high insulation resistance.
29-08-05WB-MG
3m Electronic Products Division
29-08-05WB-MG by 3m Electronic Products Division is a PCB connector with 8 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.043", operates b/w -25 to 85°C, and withstands up to 500VAC. Ideal for commercial applications requiring reliable right-angle surface mount connections.
FTSH-105-01-F-DV-K-A-P
Samtec
Samtec's FTSH-105-01-F-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, male straight pin-skt connector for surface mount termination on PCBs.
52559-2052
Molex
Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.
04R-JWPF-VSLE-S
J S T Mfg
BOARD CONNECTOR; MIL Conformity: NO; Contact Material: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
B2B-XH-A(LF)(SN)
B2B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring a male contact gender, solder termination, and operating temperatures from -25 to 85 °C.
2-1761603-5
TE Connectivity 2-1761603-5 is a dual-row board connector with 14 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with solder termination in blue color.
54122-112-04-2000LF
AMPHENOL ICC
Amphenol Icc's 54122-112-04-2000LF is a board connector with 8 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 125 °C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
SF56S006V4BR2000
Japan Aviation Electronics Industry
PCB CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; MIL Conformity: NO; Mating Contact Finish: GOLD OVER NICKEL; DIN Conformance: NO;
GHR-08V-S
GHR-08V-S by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable connections in electronic devices.
PHR-4-L
PHR-4-L by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, POLYAMIDE66 insulator, and 800VAC dielectric voltage. It has a 0.386" body length, -25 to 85 °C operating temp range, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable signal transmission with 2A current at up to 24 AWG wire size.
EHR-3
EHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, 0.15"x.28" body size, and UL 94V-0 flammability rating. It is used for cable mounting with female contacts terminated via crimping, ideal for electronic applications requiring compact and reliable connections.
DF19-20S-1C
Hirose Electric
DF19-20S-1C by Hirose Electric is a 20-contact FFC/FPC connector with 0.039" pitch, 300VAC dielectric voltage, and -35 to 85°C operating range. Ideal for commercial applications, it features a polarized housing, bellowed contact design, and crimp termination for reliable signal transmission in cable assemblies.
61306421021
Wuerth Elektronik & Kg
Wurth Elektronik 61306421021 is a 64-contact board connector with 0.1" pitch, suitable for commercial applications. It features gold over nickel termination, polybutylene terephthalate insulator, and operates b/w -40 to 125°C. Ideal for PCBs requiring reliable signal transmission at up to 3A current rating.
746-066-520-601
Edac
Edac 746-066-520-601 is a 2-row card edge connector with 66 contacts. It features a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
PAP-04V-S
PAP-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING and CRIMP termination, this UL-rated connector operates b/w -25 to 85 °C temperatures.
473882001
Molex 473882001 is a PCB connector with 0.1" pitch, GOLD NICKEL finish, and GLASS FILLED LCP insulator. It has 6 contacts, rated for 0.5A signal current, and operates b/w -40 to 85°C. Ideal for commercial applications requiring durable surface mount connectors on boards with 16.764mm row spacing.
TSW-102-07-F-S
TSW-102-07-F-S by Samtec is a 2-contact board connector with 0.1" pitch, ideal for commercial applications. It features phosphor bronze contacts with gold flash finish, operating temperature range of -55 to 125°C, and UL94V-0 flammability rating. Suitable for PCB mounting with solder termination, this header connector offers reliable performance in various electronic devices.
43025-1000
The Molex 43025-1000 is a board connector with 10 contacts arranged in S0P10 pattern. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it features a polyamide insulator, operates b/w -40 to 105°C, and has UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ERF8-025-01-L-D-RA-L-TR
Samtec's ERF8-025-01-L-D-RA-L-TR is a right angle board stacking connector with a mating contact pitch of 0.032 inches and insulation resistance of 50G ohm. It is commonly used in commercial applications for board mounting, with a max operating temperature of 125°C and min operating temperature of -55°C.
ERF8-025-01-L-D-RA-EGP-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO; Mounting Type: BOARD;
ERF8-025-01-L-D-RA-TR
BOARD CONNECTOR; JESD-609 Code: e3; Contact Material: BERYLLIUM COPPER; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Finish: GOLD (10) OVER NICKEL (50);
ERF8-025-05.0-L-DV-K-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
ERF8-010-07.0-S-DV-EGP-K-TR
BOARD STACKING CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: GOLD OVER NICKEL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: BERYLLIUM COPPER;
ERF8-010-07.0-S-DV-K-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.032;
ERF8-050-05.0-L-DV-K-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
ERF8-010-07.0-S-DV-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: SOCKET;
ERF8-020-05.0-L-DV-K-TR
Samtec ERF8-020-05.0-L-DV-K-TR is a 40-contact board stacking connector with 0.032" pitch, suitable for PCB applications. It features liquid crystal polymer insulator, matte tin over nickel finish, and operates b/w -55°C to 125°C. Ideal for commercial use in electronics requiring a 2.2A signal current capacity.
ERF8-030-05.0-L-DV-K-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 10u;
ERF8-100-05.0-L-DV-L
Samtec's ERF8-100-05.0-L-DV-L is a BOARD STACKING CONNECTOR with 200 GOLD contacts on 0.8mm pitch. It features BERYLLIUM COPPER contact material and Tin (Sn) termination for SURFACE MOUNT applications. This SOCKET connector, with 2 loaded rows, is ideal for board-to-board connections in various electronic devices.
ERF8-100-05.0-S-DV-L
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Terminal Pitch (mm): .8; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
ERF8-013-09.0-L-DV-K-TR
BOARD STACKING CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BERYLLIUM COPPER; Mating Contact Finish: GOLD (10) OVER NICKEL (50);
ERF8-013-09.0-L-DV-TR
Samtec's ERF8-013-09.0-L-DV-TR is a 26-contact board stacking connector with matte tin over nickel finish. Featuring beryllium copper contacts, it has a terminal pitch of 0.8mm and UL flammability rating of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
ERF8-049-05.0-S-DV-L-K-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 30u; Terminal Pitch (mm): 0.8;
ERF8-050-05.0-L-DV-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 4.4958;
ERF8-100-05.0-STL-DV-K
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Body or Shell Style: SOCKET; Termination Type: SURFACE MOUNT;
ERF8-020-01-L-D-RA-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BERYLLIUM COPPER; IEC Conformity: NO; MIL Conformity: NO;
ERF8-030-09.0-L-DV-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Termination Contact Finish: MATTE TIN OVER NICKEL;
ERF8-010-05.0-S-DV-L-TY
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: AU ON NI; No. of PCB Rows: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved