Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CL21B333KBANNNC by Samsung Electro-mechanics is an 0805 SMT ceramic capacitor with a capacitance of 0.033 uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for various electronic applications requiring stable performance in a compact form factor. The capacitor's multi-layer design and matte tin terminal finish ensure reliable operation in diverse environments.
Median Price
$0.005
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Arrow
1+ parts
$0.004
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$0.006
Nova Conductors
$0.012
EXC GmbH
$0.035
Ozdisan Elektronik
$0.036
Component Electronics Inc.
$0.150
$0.120
$0.100
Cyclops Electronics Ltd
Classic Components Corporation
ComSIT USA
Micros
$0.008
Partservice
$0.021
$0.011
LIBRA Elektronik GmbH
Bristol Electronics
$0.090
$0.015
$0.009
Micros sp.j. W. Kędra i J. Lic
Holdelec - ElecDif-Pro
Dan-Mar Components
ComSIT Distribution GmbH
Vyrian
Lakeview Electronics
Astute Electronics Inc
Speed Components Ltd
Prism Electronics
EMSNET
Component Sense
ECAB
Ampacity Inc.
$0.003
Bastille Electronics
AZTECH Wire
$15.588
Argo Parts USA
Continental Prestige Electronics
Ceramic material provides high stability and reliability, making it a suitable choice for various applications.
The rectangular shape allows for easy and compact mounting on PCBs, saving space and simplifying assembly processes.
With multiple layers, this capacitor offers increased capacity in a small form factor, ideal for high-density applications.
The packaging ensures secure transportation and storage, protecting the capacitor from damage.
The 0805 size code indicates a standard size that is widely compatible and can be easily integrated into different circuit designs.
Having two terminals simplifies the soldering process and ensures a secure connection within the circuit.
Surface Mount Technology (SMT) allows for efficient automated assembly processes, improving overall productivity.
The wraparound terminals provide a strong and reliable connection, enhancing the capacitor's performance and longevity.
The 10% negative tolerance ensures consistent performance within specified parameters, guaranteeing reliability in operation.
The X7R temperature code signifies stable capacitance over a wide temperature range, suitable for varying operating conditions.
With a maximum operating temperature of 125°C, this capacitor can withstand high heat environments without sacrificing performance.
Being a ceramic capacitor, it offers low leakage, high dielectric strength, and excellent stability, making it a reliable choice for different applications.
With a minimum operating temperature of -55°C, this capacitor can function effectively in extreme cold conditions.
The 15% temperature coefficient indicates minimal variation in capacitance with temperature changes, ensuring stable performance.
The matte tin finish with a nickel barrier provides corrosion resistance and solderability for a durable and reliable connection.
The low profile height of 0.75 mm allows for compact and space-saving designs, suitable for modern electronic devices.
The width of 1.25 mm offers compatibility with standard PCB layouts, making integration easy and efficient.
The surface mounting feature simplifies assembly processes and enhances reliability in high vibration environments.
The length of 2 mm provides a balanced form factor that can fit various circuit layouts while maintaining stability and performance.
The 10% positive tolerance ensures consistency in capacitance values within specified limits, contributing to reliable circuit operation.
With a capacitance of 0.033 uF, this capacitor offers the desired storage capacity for filtering and smoothing applications.
The 50V rated DC voltage allows for safe and reliable operation in circuits with varying voltage requirements.
Fixed Capacitors CL21B333KBANNNC attributes and parameters. Explore more Fixed Capacitors devices from Samsung Electro-mechanics
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
CL21B333KBANNNC Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - MLCC 15/May/2020
Established in 1973, Samsung Electro-Mechanics has become a remarkable developer and manufacturer of key electronic components not only in Korea but also in other parts of the world. The full name of Samsung Electro-Mechanics in English is referring again to electronics and machinery. Samsung Electro-Mechanics began with a focus on production of audio/video parts and laid the foundation for the technological independence of Korea’s parts industry. In the 1980s, we diversified our business areas into materials and computer parts. Subsequently, in the 1990s, we focused on developing promising next-generation products such as chip parts, mobile communication parts, and optical parts. Since the start of the 2000s, the company has been seeking to further develop strategic technologies and create business synergy based on core technologies of materials, multilayer thin-film molding, and high-frequency circuit design. With this at our core, we are focusing on fostering the business of chip parts, camera modules, communication modules and boards. Samsung Electro-Mechanics will expand its business portfolio through continuous new product development through first-class core products and technology convergence and integration, while at the same time fostering the next-generation growth business and moving forward as a leader in the electronic parts industry.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Unitrode
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Wuxi Xuyang Electronic
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Diotec Electronics
M39006/22-0565
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CGA5L1X7R1H106K160AC
TDK
TDK's CGA5L1X7R1H106K160AC is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating temperature range, and AEC-Q200 standard compliance. Ideal for automotive applications requiring compact SMT capacitors with high reliability.
C5750X7S2A156M250KB
TDK C5750X7S2A156M250KB is a ceramic capacitor with 15uF capacitance and 100V rated DC voltage. It has X7S temperature characteristics, -55 to 125 °C operating range, and 20% tolerance. Ideal for surface mount applications requiring reliable multi-layer capacitors in compact rectangular packages.
GRM155R71A104KA01D
Murata Manufacturing
Murata Manufacturing's GRM155R71A104KA01D is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
C1210C475K8RACTU
KEMET Corporation
The KEMET Corporation C1210C475K8RACTU is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM188R71H102KA01D
GRM188R71H102KA01D by Murata Manufacturing is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
GRM1555C1H102JA01D
Murata Manufacturing's GRM1555C1H102JA01D is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has C0G temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for SMT applications requiring compact size and stable performance in various electronic circuits.
CGA6M3X7S2A475M200AB
TDK's CGA6M3X7S2A475M200AB is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It features X7S temperature characteristics, -55 to 125 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
C1210C105K5RACTU
KEMET C1210C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic devices due to its compact size and high reliability.
M39006/25-0236
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C103J5RACTU
KEMET C0603C103J5RACTU is a ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for SMT applications due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C). Suitable for various electronic devices requiring stable capacitance in a small form factor.
EMVY101ARA101MKE0S
Nippon Chemi-con
EMVY101ARA101MKE0S by Nippon Chemi-con is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 100V. It features a tan delta of 0.1 and leakage current of 0.1mA, making it suitable for applications requiring high ripple current handling capabilities. With a cylindrical package shape and surface mounting feature, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
GRM188R61E105KA12D
GRM188R61E105KA12D by Murata is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
EEVFK1J471M
Panasonic
Panasonic EEVFK1J471M is a 470uF Aluminum Electrolytic Capacitor with 63V URdc. It features Tan Delta of 0.08, Leakage Current of 0.2961mA, and Ripple Current of 1057.5mA, making it ideal for automotive applications due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 105°C.
C0402C105K8PACTU
KEMET C0402C105K8PACTU is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and high reliability in various electronic circuits.
GRM21BR60J226ME39L
Murata Manufacturing's GRM21BR60J226ME39L is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
12103D476MAT2A
KYOCERA AVX
12103D476MAT2A by KYOCERA AVX is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C0805C106K8PACTU
KEMET C0805C106K8PACTU is a ceramic capacitor with 10uF capacitance, 10% tolerance, and X5R temperature coefficient. Ideal for SMT applications, it operates b/w -55°C to 85°C, making it suitable for various electronic devices requiring stable performance in a compact package.
C2220C106K5RACTU
KEMET C2220C106K5RACTU is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. It is a surface mount component suitable for applications requiring stable performance in temperatures ranging from -55 to 125°C. Ideal for compact electronic devices due to its small size and multi-layer design.
CL31B105KBHNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B105KBHNNNE is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CL21B104KBCNNNC
Samsung Electro-mechanics CL21B104KBCNNNC is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact rectangular package.
CL21B105KBFNNNE
Samsung Electro-mechanics' CL21B105KBFNNNE is a ceramic capacitor with 1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CL21B106KOQNNNE
Samsung Electro-mechanics CL21B106KOQNNNE is an 0805 SMT ceramic capacitor with 10uF capacitance and 16V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable performance in a compact surface mount package.
CL21A226MAQNNNE
Samsung Electro-mechanics CL21A226MAQNNNE is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage requirements.
CL21B103KBANNNC
CL21B103KBANNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high reliability and stability in various electronic circuits.
CL21B473KBCNNNC
Samsung Electro-mechanics CL21B473KBCNNNC is a ceramic capacitor with 0.047uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CL21C220JBANNNC
CL21C220JBANNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.000022 uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high precision and stability in various electronic circuits.
CL21A226MAYNNNE
CL21A226MAYNNNE by Samsung Electro-mechanics is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications in various electronic devices due to its compact rectangular package and multi-layer design.
CL21B472KBANNNC
Samsung Electro-mechanics CL21B472KBANNNC is an 0805 SMT ceramic capacitor with 0.0047 uF capacitance and 50V URdc. With X7R temp characteristics, it operates from -55 to 125 °C, making it ideal for surface mount applications requiring high temp stability.
CL21B105KBFNNNG
Samsung Electro-mechanics' CL21B105KBFNNNG is an 0805 SMT ceramic capacitor with 1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in a wide temperature range.
CL21A106KOQNNNE
CL21A106KOQNNNE by Samsung Electro-mechanics is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability. The rectangular package with wraparound terminals and matte tin finish ensures easy surface mounting in various electronic devices.
CL21A106KPFNNNE
Samsung Electro-mechanics' CL21A106KPFNNNE is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high reliability.
CL21A106KAYNNNE
Samsung Electro-mechanics' CL21A106KAYNNNE is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for surface mount applications in various electronic devices. The compact rectangular package measures 2x1.25x1.25mm and features a multi-layer design with matte tin terminal finish.
CL21C221JBANNNC
Samsung Electro-mechanics CL21C221JBANNNC is a ceramic capacitor with capacitance of 0.00022uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high precision and stability in various electronic circuits.
CL21B105KAFNNNE
Samsung Electro-mechanics' CL21B105KAFNNNE is an 0805 SMT ceramic capacitor with 1uF capacitance and 25V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable capacitance in a compact surface mount package.
CL21A476MQYNNNE
CL21A476MQYNNNE by Samsung Electro-mechanics is a ceramic capacitor with 47uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for SMT applications requiring compact size and high reliability in various electronic devices.
CL21B102KBANNNC
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CL21A475KBQNNNE
Samsung Electro-mechanics' CL21A475KBQNNNE is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CL21C101JBANNNC
Samsung Electro-mechanics' CL21C101JBANNNC is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability in various electronic devices.
CL21B106KPQNNNE
CL21B106KPQNNNE by Samsung Electro-mechanics is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 10 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in electronic devices for its compact size and high performance.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved