Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
450BXW150MEFR18X45 by Rubycon is a 150uF, 450V aluminum electrolytic capacitor with tan delta of 0.25 and leakage current of 0.77942mA. It is ideal for applications requiring high ripple current handling capabilities, such as power supplies and industrial electronics due to its radial package style and through hole mounting feature.
Median Price
$6.430
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$6.270
100+ parts
$3.010
1k+ parts
$2.850
10k+ parts
$2.680
Mouser Electronics
$6.590
$3.470
-
DigiKey
$6.930
$3.964
$3.075
$2.912
Verical
$3.885
$3.013
Nova Conductors
$2.606
Vyrian
VNN
IBS Electronics
$1.851
NAC Semi
$2.230
$2.060
Sensible Micro Corp
$3.071
$2.835
Argo Parts USA
Continental Prestige Electronics
$2.554
CoreStaff
$7.381
$1.561
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
GreenTree Electronics
This product uses aluminum as a dielectric material, providing high capacitance and low ESR, making it a reliable choice for various applications.
With a low tan delta value, this capacitor has good insulation properties and is capable of handling high-frequency signals effectively.
The low leakage current of this capacitor ensures minimal power loss and efficient energy storage, making it suitable for high-performance circuits.
The high ripple current rating allows this capacitor to withstand fluctuating loads, making it ideal for power supply and filtering applications.
With two terminals, this capacitor is easy to install and connect in circuits, providing convenience during assembly.
The radial package style makes this capacitor suitable for through-hole mounting on PCBs, ensuring secure and stable connections.
The wire terminal shape simplifies the soldering process, making it easy to attach the capacitor securely to circuit boards.
With a 20% negative tolerance, this capacitor offers consistent performance within specified limits, ensuring reliability in operation.
The high maximum operating temperature allows this capacitor to function effectively in demanding environments without degradation.
The 7.5mm terminal pitch provides sufficient spacing for easy soldering and connectivity, making installation hassle-free.
As an aluminum electrolytic capacitor, this product offers high capacitance values and low ESR, making it ideal for filtering and energy storage applications.
With a minimum operating temperature of -40°C, this capacitor is suitable for use in a wide range of temperature conditions.
The polarized design of this capacitor ensures proper orientation during installation and prevents reverse connection, enhancing safety and performance.
With an 18mm diameter, this capacitor has a compact size that saves space on PCBs, making it suitable for applications with size constraints.
The through-hole mounting feature simplifies the installation process, providing secure and reliable attachment to circuit boards.
The 45mm length of this capacitor offers a good balance between compactness and capacitance, making it versatile for various circuit designs.
With a 20% positive tolerance, this capacitor delivers consistent performance within specified limits, ensuring stable operation in circuits.
The 150uF capacitance of this capacitor allows for efficient energy storage and filtering, making it suitable for a wide range of applications.
With a rated DC voltage of 450V, this capacitor can handle high voltage levels, making it ideal for power supply and filtering circuits.
Fixed Capacitors 450BXW150MEFR18X45 attributes and parameters. Explore more Fixed Capacitors devices from Rubycon
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Tan Delta:
Terminal Pitch:
Terminal Shape:
450BXW150MEFR18X45 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Production and sales of aluminum electrolytic capacitors Other capacitor manufacture and sales Development, design, manufacture and sales of switching power supply units. Our products, which were developed with our in-house developed materials and equipment as our core technology, contribute to the miniaturization and cost reduction of not only state of art fields but also all electronic circuits as products with the originality required by our customers.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Philips Semiconductors
Thinking Electronic Industrial
C1206C104K1RACTU
KEMET Corporation
C1206C104K1RACTU by KEMET is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact dimensions of 3.2mm x 1.6mm x 0.78mm.
M39006/25-0236
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1206C106K4RACTU
KEMET C1206C106K4RACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
VJ0603Y104KXJCW1BC
Vishay Intertechnology's VJ0603Y104KXJCW1BC is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
GRM155R71C224KA12D
Murata Manufacturing
The Murata Manufacturing GRM155R71C224KA12D is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
GRM155R71E473KA88D
The Murata Manufacturing GRM155R71E473KA88D is a ceramic capacitor with capacitance of 0.047uF and rated DC voltage of 25V. It has a temperature coefficient of 15% per °C and operates b/w -55 to 125°C. This SMT capacitor with wraparound terminals is ideal for various electronic applications requiring stable performance in a compact package.
C0603C104K5RAC7013
KEMET Corporation's C0603C104K5RAC7013 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
EEEHD1V4R7AR
Panasonic EEEHD1V4R7AR is a 4.7uF aluminum electrolytic capacitor with 35V URdc. It features tan delta of 0.13, leakage current of 0.003mA, and ripple current of 17mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
EEE1HA4R7WR
Panasonic EEE1HA4R7WR is a 4.7uF aluminum electrolytic capacitor with 50V rated DC voltage, suitable for AEC-Q200 standards. It features tan delta of 0.14, leakage current of 0.003mA, and ripple current of 18mA, making it ideal for automotive applications requiring high reliability in a compact SMT package.
M39006/25-0052
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C103K5RAC
Cornell Dubilier Electronics
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCJ31CR71H225KA12L
Murata Manufacturing's GCJ31CR71H225KA12L is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
CC0402KRX7R8BB103
Yageo
Yageo CC0402KRX7R8BB103 is a ceramic capacitor with 0.01uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0402C104K4RACTU
The KEMET Corporation C0402C104K4RACTU is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in electronics requiring stable performance across temperatures from -55 to 125 °C.
CL10B104KB8NNNL
Samsung Electro-mechanics
CL10B104KB8NNNL by Samsung Electro-mechanics is a 0603 SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring compact size and high reliability in various electronic circuits.
C1608X5R1A226M080AC
TDK
TDK C1608X5R1A226M080AC is a ceramic capacitor with 22uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for SMT applications due to its small size (1.6x0.8x0.8mm) and high temp range (-55 to 85°C).
C0603C105K4RACAUTO7411
KEMET C0603C105K4RACAUTO7411 is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
CL10B103KB8NNNC
Samsung Electro-mechanics CL10B103KB8NNNC is a ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
12065C104K4T2A
KYOCERA AVX
12065C104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated DC voltage of 50V, and X7R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact dimensions of 3.2mm x 1.6mm x 0.94mm.
GRM155R60J105KE19D
Murata Manufacturing's GRM155R60J105KE19D is a 0402 SMT ceramic capacitor with 1uF capacitance, 6.3V URdc, and X5R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high temperature tolerance of -55°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
450BXW10MEFR10X16
Rubycon
450BXW10MEFR10X16 by Rubycon is a 10uF, 450V Aluminum Electrolytic Capacitor with Tan Delta of 0.25 and Ripple Current of 130mA. Ideal for applications requiring high capacitance and voltage tolerance in electronic circuits.
450BXW22MEFR12.5X20
The Rubycon 450BXW22MEFR12.5X20 is a fixed aluminum electrolytic capacitor with a capacitance of 22uF and rated DC voltage of 450V. It has a cylindrical package shape, through-hole mounting feature, and can operate in temperatures ranging from -40 to 105°C. This capacitor is commonly used in electronic circuits for power supply filtering and energy storage applications.
450BXC6R8MEFC10X16
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 6.8 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
450BXW180MEFR18X50
450BXW180MEFR18X50 by Rubycon is a 180uF, 450V aluminum electrolytic capacitor with tan delta of 0.25 and leakage current of 0.85381mA. It is ideal for applications requiring high ripple current handling capabilities and operates b/w -40 to 105 °C, making it suitable for various electronic devices.
450BXC22MEFC12.5X25
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
450BXC22MEFC16X20
450BXC22MEFCG412.5X25
The Rubycon 450BXC22MEFCG412.5X25 is a 22uF aluminum electrolytic capacitor with a rated DC voltage of 450V. It has a tan delta of 0.2, leakage current of 0.496mA, and ripple current of 240mA. This capacitor is commonly used in through-hole mount applications requiring high capacitance and voltage tolerance.
450BXF22M12.5X20
Rubycon 450BXF22M12.5X20 is a 22uF, 450V Aluminum Electrolytic Capacitor with 700mA ripple current. Ideal for applications requiring high capacitance and voltage tolerance in bulk packaging. Operating temperature range from -25°C to 105°C makes it suitable for various electronic devices.
450BXW22MEFC12.5X20
450BXC10MEFC10X20
450BXC10MEFC10X20 by Rubycon is a fixed aluminum electrolytic capacitor with a capacitance of 10uF and rated DC voltage of 450V. It has a max operating temperature of 105°C and is commonly used in through-hole mount applications.
450BXW68MEFR12.5X45
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
450BXW68MEFR18X25
450BXW82MEFR18X30
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 82 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
450BXW150MEFCCA18X45
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
450BXW150MEFCCE18X45
450BXW150MEFCKC18X45
450BXW150MEFRGC18X45
450BXW150MEFRGC18X50
450BXW150MEFR18X50
450BXW150MEFC18X45
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved