Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SML-311UTT86K is a 1.2mm single color LED with a peak wavelength of 630nm and max forward current of 0.02A. It is ideal for surface mount applications requiring a red light source with a nominal luminous intensity of 5.2mcd.
Median Price
$0.114
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Electronic Treasures
Bristol Electronics
Classic Components Corporation
Vyrian
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
Corohmni
$0.089
Argo Parts USA
$0.113
$0.110
Continental Prestige Electronics
$0.111
Advanced Electronics
$0.740
$0.703
Aztec Data Supply Inc.
Ampacity Inc.
$5.100
AZTECH Wire
$7.760
$7.450
$7.300
$7.160
Semicontronic
$18.100
$17.648
$17.557
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Glotronic Ltd.
Bastille Electronics
This product is configured as a single LED, making it suitable for applications where a single point of light is required.
With its compact size, this LED can fit into tight spaces and contribute to the miniaturization of the overall design.
This LED offers a single function, ensuring simplicity and ease of use in various applications.
This LED can handle a maximum forward current of 0.02 Amps, allowing for efficient and reliable operation.
The peak wavelength of 630 nm ensures a vibrant red color output, making this LED ideal for applications where vivid and eye-catching illumination is desired.
The colorless transparent lens allows for maximum light transmission, enhancing the LED's brightness and visibility.
Being a single color LED, this product provides consistent and uniform illumination in the specified color.
With two terminals, this LED is easy to connect and integrate into electronic circuits or PCBs.
The LED can operate reliably at temperatures up to 85°C, making it suitable for various environments.
The low profile height of 0.8 mm ensures space-saving installation and compatibility with slim designs.
The rectangular shape of this LED facilitates easy integration into various product designs, offering flexibility in placement.
Even in cold environments, this LED maintains its functionality down to -30°C, making it reliable in a wide range of conditions.
The gold terminal finish with a nickel barrier ensures excellent conductivity, corrosion resistance, and reliable soldering connections.
This LED emits a vibrant red color, making it suitable for signaling, decorative, or branding purposes.
The LED is supplied in tape packaging, providing convenience for automated assembly processes.
With a terminal pitch of 1.65 mm, this LED is compatible with standard PCB layouts and facilitates easy integration into electronic circuits.
The LED's nominal luminous intensity of 5.2 milli-candela ensures a bright and visible light output, making it suitable for various applications.
The surface mounting feature allows for direct soldering onto PCBs, facilitating efficient production and reliable mechanical stability.
Visible LEDs SML-311UTT86K attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
SML-311UTT86K Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LTL-4231NLC
Lite-on Technology
LTL-4231NLC by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.007A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTST-C170KGKT
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
ASMB-MTB0-0B3A2
Broadcom
ASMB-MTB0-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. It has a peak wavelength of 634/522/465nm, max forward current of 0.025A, and viewing angle of 115°. Ideal for surface mount applications requiring vibrant RGB illumination in compact spaces.
1.90.690.269/0000
Rafi & Kg
1.90.690.269/0000 by Rafi & Kg is a 3mm red LED with max current of 0.05A, T-1 code, and radial mount feature. Ideal for indicator lights in electronics due to its single color configuration and round shape.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
HLMP-1719
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
KP-2012QBC-D
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 468;
CMD17-21VGC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: CLEAR; Shape: RECTANGULAR;
LTST-C230KGKT
LTST-C230KGKT by Lite-on Technology is a 1.6mm SINGLE COLOR LED with a peak wavelength of 574nm and max forward current of 0.03A. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
LXR7-SW57
Lumileds Holding B V
SINGLE COLOR LED;
HLMP-3301-D0000
HLMP-3301-D0000 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, with radial mounting feature.
HLMP-1301
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
QS63XXG12
Apem Components
Visible LEDs;
LGR971
Elma Electronic
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Packing Method: TR; Configuration: SINGLE; Color: GREEN;
19-337/R6GHBHC-A01/2T
Everlight Electronics
The Everlight Electronics 19-337/R6GHBHC-A01/2T is a triple color LED array with separate configuration and 3 elements. Featuring brilliant red, green, and blue colors at wavelengths of 632nm, 518nm, and 468nm respectively. Ideal for applications requiring surface mount LEDs with a viewing angle of 120°.
150141GS73100
Wuerth Elektronik & Kg
150141GS73100 by Wurth Elektronik is a single color LED with a peak wavelength of 515nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 120° and nominal luminous intensity of 1000mcd. Ideal for surface mount applications in electronics for its compact size (2.4mm) and green light emission.
AP3216CGCK
Kingbright Electronic
AP3216CGCK by Kingbright Electronic is a 2mm SINGLE COLOR LED with peak wavelength of 574nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for applications requiring GREEN light emission in surface mount configurations.
LTST-C190EKT
LTST-C190EKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 630nm, ideal for applications requiring RED light emission. With a max forward current of 0.03A and viewing angle of 130°, it's suitable for surface mount installations in various electronic devices. Operating temperature range from -55 to 85 °C ensures reliable performance in diverse environments.
MLCAWT-A1-0000-000XE1
Wolfspeed
Wolfspeed's MLCAWT-A1-0000-000XE1 is a surface mount single color LED with max. forward current of 0.35A, height of 1.2mm, and min. luminous intensity of 120cd. Ideal for applications requiring cool white light at a wavelength, with max. reverse voltage of 5V and forward voltage of 3.4V in bulk packaging.
HSMS-C190
HSMS-C190 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light, it operates b/w -40 to 85 °C and has surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-310VTT86
ROHM
ROHM's SML-310VTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 610nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for surface mount applications requiring a colorless transparent lens, it operates b/w -30°C to 85°C, emitting red light at 4V reverse voltage.
SML-311YTT86K
ROHM SML-311YTT86K is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOW light at 5.2mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -30°C to 85°C temperatures.
SML-310MTT86N
ROHM's SML-310MTT86N is a 1.2mm SINGLE COLOR LED with peak wavelength of 570nm and luminous intensity of 20.5mcd. Ideal for surface mount applications, it operates b/w -30°C to 85°C, emitting a yellowish green light suitable for various visible LEDs uses.
SML-310MTT86M
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-310MTT86
ROHM's SML-310MTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 555nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and operating temperature range from -30°C to 85°C, it offers reliable performance in various optoelectronic designs.
SML-310VTT86L
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.2; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-311YTT86
SINGLE COLOR LED ARRAY; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-310MTT86L
SML-311YTT86H
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-311UTT86
SML-310MTT86K
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-311YTT86J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.3; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-310PTT86L
SML-310VTT86K
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML312BCTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-310VTT86J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.3; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML312BCTT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 73.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-310YTT86
ROHM SML-310YTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 570nm, forward current of 0.02A, and luminous intensity of 16.0mcd. Ideal for surface mount applications requiring yellow light emission in a compact form factor.
SML-311UTT86J
SML-311UTT86G
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.3; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved