Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Peripheral Drivers BD2055AFJ attributes and parameters. Explore more Peripheral Drivers devices from ROHM
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
BD2055AFJ Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
EU2B-YS3303C
Idec
ROTARY SWITCH;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
VN5016AJ-E
STMicroelectronics' VN5016AJ-E is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It features CMOS technology, 0.8mm terminal pitch, and SOURCE output current flow direction. Ideal for BUFFER OR INVERTER BASED applications in various industries due to its compact size and robust design.
UDN2987LWTR
Allegro MicroSystems
Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.
TPS272C45ARHFR
Texas Instruments
TPS272C45ARHFR by Texas Instruments is a peripheral driver with 2 functions, operating at 6-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to its high side driver and low turn-on/off times.
MAX14914BATE+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
BTS70202EPAXUMA1
Infineon Technologies
BTS70202EPAXUMA1 by Infineon is a peripheral driver with 14 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110 us. This rectangular package is ideal for automotive applications requiring a nominal output peak current limit of 5A.
FPF2108
FPF2108 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.8 A. Ideal for industrial applications requiring a compact form factor and source flow direction.
VNI4140K
VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.
NUD3160LT1G
NUD3160LT1G by Onsemi is a peripheral driver with a max supply voltage of 60V and output current of 0.15A. It features built-in transient protections, operates in automotive temperature grades, and is ideal for buffer or inverter-based applications.
BTS5215LXT
BTS5215LXT by Infineon Technologies is a peripheral driver with 2 functions, operating at supply voltages b/w 5.5V to 40V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline device with gull wing terminals is ideal for applications requiring a nominal output peak current limit of 7.4A and fast turn-on/off times of 250us/270us.
L293DNE
L293DNE by Texas Instruments is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in transient and thermal protections, output current flow in both source and sink directions, and a turn-on time of 0.4us. Ideal for applications requiring precise control of motors or actuators in commercial temperature environments.
ADUM3223BRZ
Analog Devices
ADUM3223BRZ by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3-5.5V, and built-in thermal and under voltage protections. Ideal for automotive applications due to its small outline package style and gull wing terminal form.
TDE1708DFT
STMicroelectronics' TDE1708DFT is a peripheral driver with 48V max supply voltage, 24V power supplies, and 0.3A max output current. Ideal for buffer or inverter-based applications, it offers transient and thermal protections, operates b/w -25 to 85 °C, and has a small outline package style.
FPF2701MX
FPF2701MX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections against overcurrent, thermal issues, and undervoltage. This small outline package features 8 terminals and is ideal for industrial applications requiring a peak output current limit of 0.4A in a compact design.
BTS716G
BTS716G by Infineon Technologies is a peripheral driver with 4 functions, operating at supply voltages b/w 5.5V to 40V. It offers built-in protections against transient, over voltage, thermal, and under voltage conditions. With a turn-on time of 250us and turn-off time of 270us, it is suitable for applications requiring a nominal output peak current limit of 5.3A in automotive electronics.
MAX845ESA+
VN808TR-32-E
STMicroelectronics' VN808TR-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, suitable for automotive applications. It offers built-in protections against transient events, thermal issues, and under-voltage conditions. With a max output current of 0.5A and fast turn-on/off times of 100/150us, it is ideal for driving various loads in automotive systems.
IRS2181SPBF
IRS2181SPBF by Infineon Technologies is a peripheral driver with 8 terminals and built-in transient & under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications due to its small outline package style and CMOS technology.
TPS27S100APWPT
TPS27S100APWPT by Texas Instruments is a small outline, thin profile peripheral driver with 14 terminals. It offers built-in protections for transient, over current, thermal, and under voltage conditions. With a max supply voltage of 40V and nominal output peak current limit of 7A, it is ideal for automotive applications requiring high side drivers.
VN920B5TR-E
STMicroelectronics VN920B5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. Ideal for applications requiring source flow direction, it comes in a small outline package suitable for surface mount assembly.
BTS721L1
BTS721L1 by Infineon is a MOS technology peripheral driver with 4 functions, suitable for automotive applications. It offers built-in protections against transient, over current, and over voltage. With a max supply voltage of 34V and nominal output peak current limit of 9.8A, it ensures reliable performance in various driving scenarios.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ROHM
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved