Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Width (mm): 3.0; Height: 1.1 mm; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Additional Features: AEC-Q200; Maximum Operating Temperature: 85 Cel;
Median Price
$0.890
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Continental Prestige Electronics
$0.872
Argo Parts USA
Infinite Electronics LLP (Excess)
Netroflash
$0.845
$0.828
SAW Filters B39162B3413U410 attributes and parameters. Explore more SAW Filters devices from Rf360 Europe
Additional Features:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Width (mm):
RF360 Holdings is a Qualcomm Incorporate subsidiary with R&D and manufacturing and/or sales locations in Europe and Asia and its headquarters in Munich, Germany (collectively, “RF360”) driving innovation in Radio Frequency Front End (RFFE). With over 4,000 employees worldwide, RF360 develops and manufactures innovative RFFE filtering solutions for mobile devices and fast growing business segments, such as IoT, drones, robotics, automotive applications and more. RF360 offers a comprehensive portfolio of filters and filter technologies, including surface acoustic wave (SAW), temperature-compensated surface acoustic wave (TC-SAW) and bulk acoustic wave (BAW) solutions to support the wide range of frequency bands being deployed in networks across the globe.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Vishay Telefunken
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
B39321B3761Z810
TDK
The TDK B39321B3761Z810 is a SAW filter with 8 terminals, operating b/w -45°C to 95°C. It has a center frequency of 315 MHz and max insertion loss of 2.6 dB. Ideal for applications requiring surface mount filters in the 340 OHM impedance range.
B39162B4353P810
The TDK B39162B4353P810 SAW Filter has 5 terminals, operates b/w -40°C to 125°C, with a width of 1.1mm. It offers a max insertion loss of 2.2 dB at 1582.4 MHz and impedance of 50 ohms. Ideal for surface mount applications in RF circuits for signal filtering and amplification purposes.
F045ESL
Toshiba
SAW-VIDEO/SOUND FILTER; Impedance (Input): 1900 OHM//13.5 pF; Length: 16.3 mm; Output Impedance (ohm): 1800 OHM//7.2 pF; Manufacturer Series: F045ESL; Dimensions: L16.3XB6.3XH4.0 (mm)/L0.642XB0.248XH0.157 (inch);
SF0380BA02443S
Renesas Electronics
SAW FILTER; Mounting Type: SURFACE MOUNT; Height: 2 mm; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM;
SF0948BA02516S
SAW FILTER; Length: 3 mm; Impedance (Input): 50 OHM; Maximum Operating Temperature: 80 Cel; No. of Functions: 1; Output Impedance (ohm): 50 OHM;
SF0140BA02450S
SAW FILTER; Maximum Insertion Loss: 11 dB; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: 0 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 12;
FAR-F6KA-1G5754-L4AJ-Z
Taiyo Yuden
Taiyo Yuden's FAR-F6KA-1G5754-L4AJ-Z is a SAW filter with 5 terminals, operating from -30°C to 85°C. It is surface mountable in plastic packaging. Ideal for applications requiring precise signal filtering and temperature stability.
SF0434BA02587S
SAW FILTER; Minimum Operating Temperature: -10 Cel; Package Material: CERAMIC; Impedance (Input): 50 OHM; No. of Terminals: 6; Mounting Type: SURFACE MOUNT;
SF0250BA02425S
SAW FILTER; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Minimum Operating Temperature: -20 Cel; No. of Functions: 1; Height: 2.12 mm;
SF0244CN03098S
SAW FILTER; Mounting Type: SURFACE MOUNT; Width (mm): 3.785; Maximum Operating Temperature: 50 Cel; Height: 1.56 mm; Length: 11.405 mm;
SF0140BA02434S
SAW FILTER; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e3; Impedance (Input): 50 OHM; No. of Terminals: 10; Maximum Insertion Loss: 22 dB;
SF0869BA02588S
SAW FILTER; No. of Functions: 1; Terminal Finish: Matte Tin (Sn); Height: 1.4 mm; Maximum Insertion Loss: 3.4 dB; Package Material: CERAMIC;
B39721B5326U410
Rf360 Europe
SAW FILTER; Mounting Type: SURFACE MOUNT; Impedance (Input): 50 OHM; Maximum Insertion Loss: 4.2 dB; Length: 3 mm; Center/Cutoff Frequency (fo/fc): 725.5 MHz;
B39222B5359U410
SAW FILTER; Width (mm): 3.0; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Maximum Insertion Loss: 3.8 dB; Length: 3 mm;
SF0167CD02292T
SAW FILTER; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 20 dB; Height: 5.6 mm; Width (mm): 19.94;
B4858
Infineon Technologies
SAW FILTER; No. of Terminals: 10; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Minimum Operating Temperature: -30 Cel; Package Material: CERAMIC;
B39162B4310P810
SAW FILTER; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Center/Cutoff Frequency (fo/fc): 1588.655 MHz; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch); Output Impedance (ohm): 50 OHM;
SF2124E
Rfm Integrated Device
SAW FILTER; Output Impedance (ohm): 50 OHM; Package Material: CERAMIC; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 125 Cel; Screening Level: AEC-Q200;
885062-A
Qorvo
SAW FILTER;
SF0077BA03192S
SAW FILTER; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 22 dB; Impedance (Input): 50 OHM; Dimensions: L13.3XB6.5XH1.97 (mm)/L0.524XB0.256XH0.078 (inch);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B39162B4327P810
Qualcomm
SAW FILTER; Length: 1.4 mm; Packing Method: TR, 7 INCH; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel;
SAW FILTER; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT; No. of Terminals: 5; Maximum Insertion Loss: 2 dB; Minimum Operating Temperature: -40 Cel;
SAW FILTER; No. of Terminals: 5; No. of Functions: 1; Maximum Insertion Loss: 2 dB; Mounting Type: SURFACE MOUNT; Height: .4 mm;
B39162B8813P810
SAW FILTER; JESD-609 Code: e4; No. of Terminals: 5; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
The TDK B39162B8813P810 SAW Filter has 5 terminals, operates b/w -30°C to 85°C, with a width of 0.9mm. It offers a max insertion loss of 1.9 dB at 1582.47 MHz and impedance of 50 ohms. Ideal for surface mount applications in various electronic devices requiring precise frequency filtering.
B39162B3413U410
The TDK B39162B3413U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a width of 3.0mm. It offers a max insertion loss of 2.6 dB at a center frequency of 1587 MHz and impedance of 50 ohms. Ideal for surface mount applications in electronics requiring precise signal filtering at high frequencies.
B39162B9415K610
SAW FILTER; Maximum Insertion Loss: 1 dB; Height: .4 mm; Minimum Operating Temperature: -40 Cel; No. of Terminals: 5; Impedance (Input): 50 OHM;
The TDK B39162B9415K610 SAW Filter has 5 terminals, operates b/w -40°C to 85°C, with a center frequency of 1575.42 MHz. It offers low insertion loss of 1 dB and is ideal for applications requiring a compact surface mount filter with a cutoff frequency at 50 OHM impedance.
B39171-B5068-H810
The TDK B39171-B5068-H810 SAW Filter has 12 terminals, operates b/w -40°C to 85°C, and offers a max insertion loss of 11 dB. With a center frequency of 173.8 MHz, it is ideal for applications requiring a surface mount filter with an impedance of 50 ohms.
SAW FILTER; Impedance (Input): 50 OHM; Height: 1.33 mm; No. of Terminals: 12; JESD-609 Code: e4; Maximum Insertion Loss: 11 dB;
B39122-B4057-U510
SAW FILTER; Maximum Insertion Loss: 3.5 dB; JESD-609 Code: e4; Package Material: CERAMIC; Maximum Operating Temperature: 85 Cel; Length: 3 mm;
B39162B3913U410
SAW FILTER; Center/Cutoff Frequency (fo/fc): 1588 MHz; Maximum Operating Temperature: 85 Cel; Height: 1.1 mm; Impedance (Input): 50 OHM; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SAW FILTER; Center/Cutoff Frequency (fo/fc): 1588 MHz; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Height: 1.1 mm; No. of Functions: 1; Maximum Operating Temperature: 85 Cel;
B39162B4060U810
SAW FILTER; Output Impedance (ohm): 50 OHM; Maximum Insertion Loss: 2 dB; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch);
B39162-B3517-U510
The TDK B39162-B3517-U510 is a SAW filter with 1 function and 6 terminals. It has a max insertion loss of 2.5 dB and operates at temperatures ranging from -40 to 85 °C. This surface mount filter is commonly used in applications requiring a center frequency of 1586 MHz and an input impedance of 50 OHM.
SAW FILTER; Impedance (Input): 50 OHM; Length: 3 mm; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Center/Cutoff Frequency (fo/fc): 1586 MHz;
SAW FILTER; Maximum Insertion Loss: 1.9 dB; Length: 1.4 mm; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT; JESD-609 Code: e4;
B39162B4348P810
SAW FILTER; Minimum Operating Temperature: -40 Cel; Width (mm): 1.1; No. of Terminals: 5; Height: .4 mm; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch);
B39162B3412U410
SAW FILTER; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Maximum Insertion Loss: 2.6 dB; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved