Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW-VIDEO/SOUND FILTER; No. of Functions: 1; Height: 5.1 mm; Manufacturer Series: SF0044BA01979T; Center/Cutoff Frequency (fo/fc): 44 MHz; Impedance (Input): 50 OHM;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF0044BA01979T attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Manufacturer Series:
Mounting Type:
No. of Functions:
Output Impedance (ohm):
Dimensions:
Width (mm):
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Bkc Semiconductors
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
SF0678BA03157S
Renesas Electronics
SAW FILTER; No. of Functions: 1; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Length: 3.8 mm;
RF3603D
Murata Manufacturing
Murata Manufacturing's RF3603D SAW Filter has 8 terminals, operates b/w -40°C to 85°C. With a width of 4.0mm and length of 4mm, it offers a max insertion loss of 2.2 dB at 316.4 MHz center frequency. Ideal for applications requiring a surface mount filter with impedance of 50 ohm input and 150 ohm output.
SF0077BA03082S
SAW FILTER; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -10 Cel; No. of Functions: 1; Terminal Finish: Matte Tin (Sn);
SF0500BA03232S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 500 MHz; No. of Functions: 1; Minimum Operating Temperature: -20 Cel; Package Material: CERAMIC; Length: 9.1 mm;
SF0140BA02486S
SAW FILTER; Output Impedance (ohm): 50 OHM; Dimensions: L24.64XB9.0XH1.64 (mm)/L0.97XB0.354XH0.065 (inch); Width (mm): 9.0; Maximum Insertion Loss: 25 dB; Mounting Type: SURFACE MOUNT;
SF0140BA02360T
SAW FILTER; No. of Terminals: 14; Dimensions: L22.1XB12.7XH5.33 (mm)/L0.87XB0.5XH0.21 (inch); Output Impedance (ohm): 50 OHM; JESD-609 Code: e3; Height: 5.33 mm;
MA06510
Golledge Electronics
MA06510 by Golledge Electronics is a SAW FILTER with 159.1625 MHz fo/fc, 3.8 dB Max Insertion Loss, and 50 OHM Impedance. Operating b/w -30 to 70 °C, it's ideal for applications requiring precise frequency filtering in compact spaces using SURFACE MOUNT technology.
SF0044BA01470T
SAW-VIDEO/SOUND FILTER; Impedance (Input): 50 OHM; No. of Terminals: 8; Terminal Finish: Matte Tin (Sn); Dimensions: L38.61XB25.65XH5.8 (mm)/L1.52XB1.01XH0.228 (inch); Package Material: PLASTIC;
SF0036BA02217T
SAW FILTER; Center/Cutoff Frequency (fo/fc): 35.7 MHz; Length: 35.05 mm; Height: 5.1 mm; Output Impedance (ohm): 50 OHM; Width (mm): 20.57;
B4703
Infineon Technologies
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 80 Cel; No. of Terminals: 6; Package Material: CERAMIC; JESD-609 Code: e0;
SF2186E
Murata Manufacturing's SF2186E is a SAW filter with 6 terminals, offering 67 dB attenuation at max frequency of 41000 kHz. With a center frequency of 1268.52 MHz and insertion loss of 3.2 dB, it is ideal for applications requiring surface mount filters in the range of -40 to 85°C.
SF0915BA02501S
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; No. of Functions: 1;
SF0326BA03198S
SAW FILTER; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn); Impedance (Input): 50 OHM; JESD-609 Code: e3; No. of Terminals: 10;
SF0915BA02531S
SAW FILTER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Terminals: 4; Output Impedance (ohm): 50 OHM; Maximum Insertion Loss: 3 dB;
B39731B5328U410
TDK
The TDK B39731B5328U410 is a SAW filter with 6 terminals, operating from -40 to 85°C. It has a width of 3.0mm and max insertion loss of 3.5 dB at 725.5 MHz. Ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
SF0070CF51851T
SAW FILTER; Width (mm): 12.7; Package Material: PLASTIC; No. of Terminals: 6; Maximum Insertion Loss: 25.5 dB; Center/Cutoff Frequency (fo/fc): 70 MHz;
SF0903BA02593S
SAW FILTER; JESD-609 Code: e3; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Terminal Finish: Matte Tin (Sn); Mounting Type: SURFACE MOUNT;
SF2140BA02595S
SAW FILTER; Terminal Finish: Matte Tin (Sn); Dimensions: L2.5XB2.0XH1.0 (mm)/L0.098XB0.079XH0.039 (inch); Center/Cutoff Frequency (fo/fc): 2140 MHz; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT;
SF1950BA02596S
SAW FILTER; Output Impedance (ohm): 50 OHM; Height: .9 mm; Maximum Insertion Loss: 3.4 dB; Mounting Type: SURFACE MOUNT; Impedance (Input): 50 OHM;
B39871B3725U410
TDK B39871B3725U410 SAW Filter features 6 terminals, 869 MHz center frequency, and 3.5 dB max insertion loss. Ideal for surface mount applications in temperature range -20 to 70°C, with a min attenuation frequency of 16 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0063BA03106S
SAW FILTER; No. of Terminals: 10; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM;
SF0044BA21930T
SAW FILTER; Output Impedance (ohm): 50 OHM; Maximum Insertion Loss: 23 dB; Mounting Type: THROUGH HOLE MOUNT; Center/Cutoff Frequency (fo/fc): 44 MHz; No. of Terminals: 24;
SF0038BA01943T
SAW FILTER; Dimensions: L35.1XB20.6XH5.1 (mm)/L1.382XB0.811XH0.201 (inch); Length: 35.1 mm; Maximum Insertion Loss: 25 dB; Terminal Finish: Matte Tin (Sn); Mounting Type: THROUGH HOLE MOUNT;
SF0060CN02290T
SAW FILTER; Maximum Insertion Loss: 34 dB; Length: 35.1 mm; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel;
SF0060BA03212T
SAW FILTER; JESD-609 Code: e3; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Height: 5.1 mm; Length: 35.05 mm;
SF0070BA02391S
SAW FILTER; Maximum Operating Temperature: 70 Cel; Width (mm): 6.5; Center/Cutoff Frequency (fo/fc): 70 MHz; Impedance (Input): 50 OHM; Dimensions: L13.3XB6.5XH2.0 (mm)/L0.524XB0.256XH0.079 (inch);
SF0048BA02455S
SAW FILTER; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 70 Cel; Mounting Type: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Terminals: 10;
SF0043BA02523T
SAW FILTER; Dimensions: L13.7XB2.15XH4.8 (mm)/L0.539XB0.085XH0.189 (inch); Impedance (Input): 1100 OHM//16.4 pF; No. of Functions: 1; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -20 Cel;
SF0060CN02289T
SAW FILTER; Impedance (Input): 50 OHM; Maximum Insertion Loss: 34 dB; Center/Cutoff Frequency (fo/fc): 60 MHz; Terminal Finish: Matte Tin (Sn); No. of Functions: 1;
SF0060BA03213T
SAW FILTER; Length: 35.05 mm; Center/Cutoff Frequency (fo/fc): 60 MHz; Output Impedance (ohm): 50 OHM; Width (mm): 20.57; JESD-609 Code: e3;
SF0060CN02291T
SAW FILTER; Impedance (Input): 50 OHM; Width (mm): 20.6; Minimum Operating Temperature: -25 Cel; Height: 5.1 mm; No. of Functions: 1;
SF0036BA11033T
SAW-VIDEO/SOUND FILTER; Width (mm): 20.6; Center/Cutoff Frequency (fo/fc): 36 MHz; Mounting Type: THROUGH HOLE MOUNT; No. of Functions: 1; Height: 5.1 mm;
SF0044BA03190S
SAW FILTER; Maximum Insertion Loss: 25 dB; Mounting Type: SURFACE MOUNT; Length: 24.6 mm; No. of Terminals: 10; JESD-609 Code: e3;
SF0036BA01867T
SAW-VIDEO/SOUND FILTER; Height: 5.8 mm; No. of Terminals: 8; No. of Functions: 1; Center/Cutoff Frequency (fo/fc): 36.7 MHz; Length: 38.61 mm;
SF0036BA02602T
SAW FILTER; No. of Functions: 1; Impedance (Input): 50 OHM; Length: 14.8 mm; Maximum Operating Temperature: 65 Cel; Width (mm): 2.9;
SF0044BA01081T
SAW-VIDEO/SOUND FILTER; JESD-609 Code: e3; No. of Functions: 1; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Length: 35.05 mm;
SF0060BA03214T
SAW FILTER; Center/Cutoff Frequency (fo/fc): 60 MHz; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Length: 35.05 mm; Minimum Operating Temperature: -25 Cel;
Spectrum Control
SAW-VIDEO/SOUND FILTER; Width (mm): 20.57; Output Impedance (ohm): 50 OHM; Length: 35.05 mm; Impedance (Input): 50 OHM; Height: 5.1 mm;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved