Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Cyclops Electronics Ltd
1+ parts
100+ parts
1k+ parts
10k+ parts
Extreme Components
Kepictronics
Authorized Procurement Solutions
RF/Microwave Switches UPG168TB-E4 attributes and parameters. Explore more RF/Microwave Switches devices from Renesas Electronics
Compression Point (1 dB):
Maximum Insertion Loss:
Minimum Isolation:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Meritek Electronics
Surge Components
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
HMC270MS8GETR
Analog Devices
Analog Devices' HMC270MS8GETR is an RF/Microwave SPDT switch with 2.4 dB max insertion loss, handling up to 23.98 dBm CW power. Operating from -40°C to 85°C, it supports frequencies from 0 MHz to 8000 MHz. Ideal for applications requiring high-frequency signal routing and switching in various electronic systems.
ADRF5424BCZ-GP
Analog Devices' ADRF5424BCZ-GP is a RF/Microwave Switch with 14 terminals, GAAS technology, and 50 ohm impedance. It operates from 100 MHz to 60 GHz, with a max insertion loss of 2.2 dB. Ideal for applications requiring high-frequency switching in communications systems.
UPG133G-E1
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .01 us;
MA4SW310B-1
M/a-com
SP3T; Nominal On Time: .05 us; Maximum Insertion Loss: 1.81 dB; Maximum Operating Frequency: 26000 MHz; Maximum Operating Temperature: 125 Cel; Minimum Isolation: 36 dB;
ADG918BCPZ-REEL7
ADG918BCPZ-REEL7 by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It offers low insertion loss of 1.25 dB and high isolation of 36 dB, making it ideal for diversity switch applications in the frequency range of 0-4000 MHz. The device operates at temperatures from -40 to 85°C and supports input power up to 17.99 dBm CW.
SW-277
Tyco Electronics M/a-com
SPDT; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: .65 dB; Maximum Operating Frequency: 2000 MHz;
HMC944LC4TR
Analog Devices' HMC944LC4TR is a SP4T RF switch with 5 dB max insertion loss, 30 dB min isolation, and 30 GHz max operating frequency. Ideal for RF/microwave applications, it features GaAs technology, ceramic package, and reflective port termination.
HMC344LC3RTR
Analog Devices' HMC344LC3RTR is a GAAS SP4T RF switch with 16 terminals, offering 30 dB isolation and 3 dB insertion loss at 8 GHz. Suitable for RF/microwave applications, it operates from -40 to 85°C, with 0.07 us nominal on time and -5 V power supply.
HMC174MS8RTR
Analog Devices' HMC174MS8RTR is a GAAS transfer switch with 1.8 dB max insertion loss, 15 dB min isolation, and 36 dBm compression point. Ideal for RF applications up to 3000 MHz, it features a surface mount package with tin/lead terminals for high-frequency signal routing.
KSWA-2-46
Mini-circuits
The Mini-circuits KSWA-2-46 is an RF/Microwave SPDT switch with a max input power of 26.99 dBm and VSWR of 1.94, ideal for applications requiring high isolation (min 25 dB) and low insertion loss (max 2.6 dB). Constructed with GAAS technology, it operates from 0 to 4600 MHz in surface mount packages.
TGS8122SSC
TGS8122SSC by Texas Instruments is a GAAS SPDT RF switch with 29 dBm compression point, operating from 0 to 70°C. It has a max frequency of 11 GHz and reflective port termination. Ideal for RF/microwave applications requiring high power handling and wide temperature range.
S126
L-3 Narda-miteq
SPDT;
UPG132G-E1
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: 1 dB;
UPG2012TB-E3-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
BGS12WN6
Infineon Technologies
RF/Microwave Switches;
MASWSS0180
M/a-com Technology Solutions
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
ADGM1004JCPZ-R2
ADGM1004JCPZ-R2 by Analog Devices is a SP4T RF switch with 50 ohm impedance, offering low insertion loss of 0.95 dB and high isolation of 16 dB. It operates from 0 to 13000 MHz, handling up to 33 dBm CW power. Ideal for RF/Microwave applications requiring precise signal routing in compact designs.
UPG2009TB-E3-A
Nec Compound Semiconductor Devices
SPDT; Terminal Finish: Tin/Bismuth (Sn/Bi); Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 36.02 dBm; Maximum Insertion Loss: .5 dB; Minimum Operating Temperature: -45 Cel;
HMC106
Analog Devices' HMC106 is a GAAS SPDT RF switch with -5V power supply, operating from -55 °C to 125°C. It features reflective port termination and is ideal for RF/microwave applications requiring high-performance switching capabilities in extreme temperature environments.
6062
Micronetics
SP5T; Maximum Operating Frequency: 650 MHz; Maximum Voltage Standing Wave Ratio: 2; Minimum Operating Frequency: 10 MHz; Maximum Input Power (CW): 25 dBm; Maximum Operating Temperature: 125 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPG158TB-E3
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .05 us;
UPG138GV-E1
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 18 dB;
UPG132G
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 20 dB;
UPG154TB-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 18 dB;
UPG139GV-E1
DPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
UPG137GV-E1
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
UPG107P
SPDT; Technology: GAAS; Package Equivalence Code: DIE OR CHIP; Power Supplies (V): -5; No. of Functions: 1;
UPG139GV
DPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Port Termination: REFLECTIVE;
UPG153TB-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 10 dB;
UPG152TA
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
UPG137GV
UPG155TB-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -45 Cel;
UPG131GR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOP8,.25;
UPG138GV
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 80 Cel;
UPG107B
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: CERAMIC; Technology: GAAS; Power Supplies (V): -5;
UPG130GR
UPG152TA-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Port Termination: REFLECTIVE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved