Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MODULATOR; Maximum Voltage Standing Wave Ratio: 1.5; Construction: COMPONENT; Modulation Technique: I/Q; Maximum Operating Frequency: 1000 MHz; Terminal Finish: Tin/Lead (Sn/Pb);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Modulator/Demodulators UPC8110GR-E1 attributes and parameters. Explore more RF/Microwave Modulator/Demodulators devices from Renesas Electronics
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Modulation Technique:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STMicroelectronics
Vicor
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sensitron Semiconductor
LT5528EUF#PBF
Analog Devices
Analog Devices' LT5528EUF#PBF is a RF modulator with Quadrature Phase modulation, operating b/w -40°C to 85°C. It has a frequency range of 1500-2400 MHz and 50 ohm impedance. Ideal for RF/Microwave applications requiring precise modulation/demodulation in various temperature conditions.
UPC8126K-E1
Renesas Electronics
MODULATOR; Construction: COMPONENT; Maximum Operating Temperature: 75 Cel; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Input Power (CW): 9 dBm; Modulation Technique: QUADRAPHASE;
TA8778ASN
Toshiba
MODULATOR;
X21NNPFD
X21NNPFD by Analog Devices is an RF demodulator with a max input power of 0 dBm and VSWR of 2. It operates b/w 400-700 MHz, ideal for Quadrature Phase Shift Keying modulation in RF systems. With a temp range of 0-70 °C, it's suitable for various wireless communication applications.
ADMV4540ACCZ-RL7
ADMV4540ACCZ-RL7 by Analog Devices is a RF/Microwave demodulator with 48 terminals. It operates b/w -40 °C to 85°C, covering frequencies from 17 GHz to 22 GHz. With a CW input power of 0 dBm and VSWR of 1.92, it's ideal for quadrature phase modulation applications.
HMC137
Analog Devices' HMC137 is a RF/Microwave Modulator with BIPHASE modulation. It operates b/w 6-11 GHz, offering 50 ohm impedance and 11 dB conversion loss. Ideal for high-frequency communication systems requiring precise modulation/demodulation capabilities.
UPC8110GR-E1
RV1S9353ACCSP-120V
LT5516EUF
LT5516EUF by Analog Devices is a RF/Microwave Demodulator with Quadrature Phase Modulation. Operates b/w -40 °C to 85°C, frequency range of 800-1500 MHz. Ideal for applications requiring 50 ohm impedance and Tin/Lead terminal finish.
LT5517EUF#TR
Analog Devices' LT5517EUF#TR is a RF/Microwave Modulator with Quadrature Phase modulation. It operates b/w -40 °C to 85°C, covering frequencies from 40MHz to 900MHz. Ideal for applications requiring precise modulation/demodulation in RF systems.
LT5568EUF#PBF
Analog Devices' LT5568EUF#PBF is an RF/Microwave Modulator with I/Q modulation technique. It operates b/w -40 °C to 85°C, covering frequencies from 700 MHz to 1050 MHz. Ideal for applications requiring a 50 ohm characteristic impedance and matte tin terminal finish.
UPC8190K-A
DEMODULATOR; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e6; Modulation Technique: I/Q; Maximum Input Power (CW): -12 dBm;
HMC630LP3ETR
Analog Devices' HMC630LP3ETR is a RF modulator with 16 terminals, operating frequency range of 700-1000 MHz, and CW input power up to 27 dBm. It utilizes GaAs technology for vector modulation applications in RF/microwave systems. Suitable for surface mount installations, it offers VSWR of 1.33 and operates b/w -40 °C to 85°C temperature range.
ADL5370ACPZ-R2
ADL5370ACPZ-R2 by Analog Devices is an RF modulator with quadrature phase modulation, operating b/w -40°C to 85°C. It has a frequency range of 250 MHz to 1300 MHz and a characteristic impedance of 50 ohms. Ideal for applications requiring precise modulation in RF/microwave systems.
LT5502EGN#TR
LT5502EGN#TR by Analog Devices is an RF demodulator with a max input power of 10 dBm, operating frequency range from 70 MHz to 400 MHz, and characteristic impedance of 50 ohm. It utilizes quadrature phase modulation technique and can withstand temperatures from -40 °C to 85°C. Ideal for RF/microwave applications requiring precise demodulation in various environments.
LT5517EUF
LT5517EUF by Analog Devices is a RF/Microwave Modulator/Demodulator with Quadrature Phase modulation. It operates b/w -40 °C to 85°C, covering frequencies from 40MHz to 900MHz. Ideal for applications requiring a 50 ohm characteristic impedance and Tin/Lead terminal finish.
AD8346ARUZ-RL7
AD8346ARUZ-RL7 by Analog Devices is an RF modulator with 800-2500 MHz frequency range, 10 dBm CW input power, and 1.25 VSWR. It utilizes I/Q modulation technique for various RF/microwave applications due to its wide operating temperature range (-40 to 85 °C) and 50 ohm impedance.
AD8346ARU
AD8346ARU by Analog Devices is an RF modulator with 10 dBm CW input power, 1.25 VSWR, and I/Q modulation. It operates b/w -40 °C to 85°C and covers frequencies from 800 MHz to 2500 MHz. Ideal for RF/microwave applications requiring precise modulation/demodulation capabilities.
AD8345ARE-REEL
AD8345ARE-REEL by Analog Devices is an RF/Microwave Modulator/Demodulator with 10 dBm CW input power. It operates b/w -40 to 85 °C and supports modulation using QUADRAPHASE technique. Ideal for applications requiring a MODULATOR with characteristic impedance of 50 ohm, operating frequency range of 140-1000 MHz.
MAX2022ETX+D
Maxim Integrated
MODULATOR; Maximum Operating Frequency: 2500 MHz; Modulation Technique: QUADRAPHASE; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPC8101GR-E2
MODULATOR; Maximum Input Power (CW): -7 dBm; Minimum Operating Frequency: 100 MHz; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Operating Frequency: 300 MHz; JESD-609 Code: e0;
UPC8105GR-E1
MODULATOR; JESD-609 Code: e0; Modulation Technique: I/Q; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 1.2;
UPC8126GR-E1
MODULATOR; Minimum Operating Frequency: 915 MHz; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Input Power (CW): -9 dBm;
UPC8190K
DEMODULATOR; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -25 Cel; Maximum Input Power (CW): -12 dBm;
UPC8190T5E-E1-A
DEMODULATOR; Construction: COMPONENT; Modulation Technique: I/Q; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 2170 MHz;
UPC8191K
MODULATOR; Construction: COMPONENT; Terminal Finish: Tin/Lead (Sn/Pb); Modulation Technique: I/Q; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
UPC8191K-A
MODULATOR; JESD-609 Code: e6; Maximum Input Power (CW): -12 dBm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin/Bismuth (Sn/Bi); Construction: COMPONENT;
UPC8191K-E1-A
MODULATOR; Additional Features: HIGH RELIABILITY; Construction: COMPONENT; JESD-609 Code: e6; Modulation Technique: I/Q; Terminal Finish: Tin/Bismuth (Sn/Bi);
UPC8191T5E-E1-A
MODULATOR; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Minimum Operating Frequency: 1920 MHz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
Nec Electronics
MODULATOR; Maximum Voltage Standing Wave Ratio: 1.5; Terminal Finish: Tin/Lead (Sn/Pb); Modulation Technique: I/Q; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 800 MHz;
UPC8110GR
MODULATOR; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 1000 MHz; Minimum Operating Frequency: 800 MHz; Modulation Technique: QUADRAPHASE; JESD-609 Code: e0;
MODULATOR; Maximum Voltage Standing Wave Ratio: 1.5; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 915 MHz; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
MODULATOR; Construction: COMPONENT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Voltage Standing Wave Ratio: 1.2; Modulation Technique: I/Q; JESD-609 Code: e0;
Nec Electronics America
MODULATOR; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Modulation Technique: I/Q; Maximum Operating Frequency: 1000 MHz;
California Eastern Laboratories
MODULATOR; Minimum Operating Frequency: 800 MHz; Minimum Operating Temperature: -40 Cel; Modulation Technique: I/Q; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved