Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.4 (mm)/L0.118XB0.118XH0.055 (inch);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SAW Filters SF1843BA02675S attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
1N4148WT
Bytesonic Electronics
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Continental Device India
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B39242B8857L210
Rf360 Europe
B39242B8857L210 by Rf360 Europe is a SAW FILTER with 2.4 dB Max Insertion Loss, 2442 MHz Center Frequency, and Gold (Au) finish. Ideal for applications requiring 50 OHM impedance, it operates b/w -30 to 85 °C in surface mount configurations.
TA0697A
Tai-saw Technology
TA0697A by Tai-saw Technology is a SAW FILTER with 8 terminals, operating from -40 to 85 °C. It offers a max insertion loss of 5 dB at 1382.24 MHz and has an impedance of 150 OHM//30 nH. Ideal for surface mount applications due to its compact dimensions of 3mm x 3mm x 1.4mm.
HWCA602
Renesas Electronics
SAW FILTER; Width (mm): 3.5; Impedance (Input): 50 OHM//50 nH; Height: 1 mm; Output Impedance (ohm): 50 OHM//50 nH; Length: 3.5 mm;
SF0172CD03076S
SAW FILTER; Output Impedance (ohm): 200 OHM; Mounting Type: SURFACE MOUNT; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Center/Cutoff Frequency (fo/fc): 172.8 MHz; Length: 7 mm;
B39162B4300F210
TDK
The TDK B39162B4300F210 is a SAW filter with 5 terminals, operating from -30 to 85°C. It has a center frequency of 1575.42 MHz and max insertion loss of 1.3 dB. Ideal for applications requiring surface mount filters in automotive electronics due to AEC-Q200 screening level compliance.
B39901B3934H110
SAW FILTER; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -45 Cel; Length: 3 mm; Center/Cutoff Frequency (fo/fc): 902.875 MHz; Maximum Operating Temperature: 105 Cel;
SBU4855LD
Toshiba
SAW FILTER; Height: 3.8 mm; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 480 MHz; Manufacturer Series: SBU4855LD; Mounting Type: THROUGH HOLE MOUNT;
SF0280BA01984S
SAW FILTER; Length: 5 mm; Mounting Type: SURFACE MOUNT; No. of Terminals: 8; Maximum Operating Temperature: 30 Cel; Output Impedance (ohm): 50 OHM;
SF0060CN02290T
SAW FILTER; Maximum Insertion Loss: 34 dB; Length: 35.1 mm; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel;
SF1575BA02532S
SAW FILTER; No. of Terminals: 4; Height: .75 mm; Center/Cutoff Frequency (fo/fc): 1575.42 MHz; Terminal Finish: Matte Tin (Sn); Package Material: PLASTIC;
B635
Infineon Technologies
SAW FILTER; Center/Cutoff Frequency (fo/fc): 480 MHz;
SAW FILTER; No. of Functions: 1; Output Impedance (ohm): 50 OHM; No. of Terminals: 5; Impedance (Input): 50 OHM; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch);
SF0546BA03234S
SAW FILTER; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; JESD-609 Code: e3; Center/Cutoff Frequency (fo/fc): 546 MHz; Package Material: CERAMIC;
SF1843BA02598S
SAW FILTER; No. of Functions: 1; Package Material: PLASTIC; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Height: 1.4 mm;
SF0239CD03100S
SAW FILTER; No. of Terminals: 12; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 13.5 dB; Terminal Finish: Matte Tin (Sn); Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch);
ABSTS5A2-45HM03BM
Abracon
ABSTS5A2-45HM03BM by Abracon is a SAW filter with 5 terminals, operating from -30 to 85°C. Featuring a width of 0.9mm and length of 1.1mm, it offers a max insertion loss of 2.6 dB at 2441.75 MHz. Ideal for applications requiring a surface mount filter with an impedance of 50 ohms.
B39921B4301F210
SAW FILTER; Height: .4 mm; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: 2.5 dB; Maximum Operating Temperature: 85 Cel; Length: 1.4 mm;
B39871B3725U410
TDK B39871B3725U410 SAW Filter features 6 terminals, 869 MHz center frequency, and 3.5 dB max insertion loss. Ideal for surface mount applications in temperature range -20 to 70°C, with a min attenuation frequency of 16 kHz.
TA2307A
TA2307A by Tai-saw Technology is a SAW filter with 1 function and 6 terminals. It has a max insertion loss of 5 dB and operates at temperatures ranging from -40 to 105 °C. This surface mount filter is commonly used in applications requiring a center frequency of 3500 MHz and an input impedance of 50 OHM.
B39871B3440U410
SAW FILTER; No. of Functions: 1; Width (mm): 3.0; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Maximum Operating Temperature: 105 Cel; Maximum Insertion Loss: 3.2 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF1843BA02590S
SAW FILTER; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Terminal Finish: Matte Tin (Sn); Width (mm): 3.0; Impedance (Input): 50 OHM; No. of Terminals: 6;
SF1880BA02524S
SAW FILTER; Length: 3 mm; No. of Terminals: 6; Height: 1.4 mm; Output Impedance (ohm): 50 OHM; No. of Functions: 1;
SF1880BA02524SLF
SAW FILTER; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; Maximum Operating Temperature: 80 Cel; JESD-609 Code: e3; Height: 1.5 mm;
Spectrum Control
SAW FILTER; Height: 1.4 mm; Width (mm): 3.0; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Maximum Insertion Loss: 3.8 dB;
SF1843BA02675S
SAW FILTER; No. of Terminals: 6; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; No. of Functions: 1; Minimum Operating Temperature: -30 Cel;
Integrated Device Technology
SAW FILTER; Center/Cutoff Frequency (fo/fc): 1842.5 MHz; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 3.8 dB; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Width (mm): 3.0;
SAW FILTER; Package Material: PLASTIC; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Height: 1.4 mm; Mounting Type: SURFACE MOUNT;
SAW FILTER; Minimum Operating Temperature: -30 Cel; Width (mm): 3.0; Dimensions: L3.0XB3.0XH1.4 (mm)/L0.118XB0.118XH0.055 (inch); Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn);
Api Technologies
SAW FILTER; Width (mm): 3.0; Output Impedance (ohm): 50 OHM; JESD-609 Code: e4; Height: 1.4 mm; Terminal Finish: GOLD OVER NICKEL;
SAW FILTER; No. of Functions: 1; No. of Terminals: 6; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 1842.5 MHz; Mounting Type: SURFACE MOUNT;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved