Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Width (mm): 3.8; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 75 Cel; Minimum Operating Temperature: -20 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Eliminating Global Boundries, Inc
1+ parts
100+ parts
1k+ parts
10k+ parts
SAW Filters SF0915BA03171S attributes and parameters. Explore more SAW Filters devices from Renesas Electronics
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Toshiba
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Pulse Electronics
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Surge Components
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SF0948BA03155S
Renesas Electronics
SAW FILTER; Width (mm): 3.8; Height: 1.5 mm; JESD-609 Code: e3; Dimensions: L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch); Length: 3.8 mm;
SF0140BA03008T
SAW FILTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 140 MHz; Height: 5.33 mm;
B39871B3440U410
Rf360 Europe
SAW FILTER; No. of Functions: 1; Width (mm): 3.0; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Maximum Operating Temperature: 105 Cel; Maximum Insertion Loss: 3.2 dB;
SF0869BA02503S
SAW FILTER; Length: 3.8 mm; JESD-609 Code: e3; Package Material: CERAMIC; Width (mm): 3.8; Maximum Operating Temperature: 75 Cel;
AFS20A26-915.00-T3
Abracon
Abracon's AFS20A26-915.00-T3 SAW Filter operates b/w -30°C to 85°C, with a center frequency of 915 MHz and 3 dB max insertion loss. With 4 terminals and dimensions of L2.0xB1.6xH0.9 (mm), it is ideal for applications requiring a compact surface mount filter with 50 ohm impedance such as RF communication systems.
SF0704BA03163S
SAW FILTER; Minimum Operating Temperature: -20 Cel; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 4.2 dB; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 704 MHz;
SF0325BA02633S
SAW FILTER; Maximum Operating Temperature: 85 Cel; Package Material: CERAMIC; Output Impedance (ohm): 50 OHM; Dimensions: L7.0XB5.0XH1.82 (mm)/L0.276XB0.197XH0.072 (inch); Width (mm): 5.0;
885070
Qorvo
Qorvo's 885070 SAW Filter has a center frequency of 2437 MHz, with a max insertion loss of 1.7 dB. It operates b/w -40 to 95°C and is ideal for surface mount applications requiring a compact filter solution in the 50 OHM impedance range.
QPQ1907SR
QPQ1907SR by Qorvo is a SAW filter with 5 terminals, operating b/w -40°C to 105°C. It offers a center frequency of 2412 MHz, max insertion loss of 2.2 dB, and impedance of 50 ohms. Ideal for applications requiring surface mount filters in the 50-ohm range at high frequencies.
SF0063BA03106S
SAW FILTER; No. of Terminals: 10; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM;
TDK
The TDK B39871B3440U410 is a SAW filter with 6 terminals, operating from -40 to 85°C. It has a width of 3.0mm and max insertion loss of 3.2 dB at 869 MHz. Ideal for applications requiring a surface mount filter with a center frequency of 869 MHz and impedance of 50 ohms.
B39242B9413K610
SAW FILTER; Center/Cutoff Frequency (fo/fc): 2441.75 MHz; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch); Mounting Type: SURFACE MOUNT; Width (mm): 1.1; Output Impedance (ohm): 50 OHM//2.5 nH;
AFS14A30-2185.00-T3
Abracon's AFS14A30-2185.00-T3 SAW Filter has 5 terminals, operates b/w -30°C to 105°C, with a width of 1.1mm. It offers a max insertion loss of 3.5 dB at 2185 MHz and is ideal for applications requiring a surface mount filter with an impedance of 50 ohms.
TA2547A
Tai-saw Technology
TA2547A by Tai-saw Technology is a SAW FILTER with 5 terminals, operating b/w -30 to 85 °C. It has a width of 1.1mm, length of 1.4mm, and height of 0.6mm. With a max insertion loss of 3 dB at 725.5 MHz, it's ideal for applications requiring a surface mount filter with an impedance of 50 OHM.
SF0850DL01825T
SAW FILTER; No. of Functions: 1; Dimensions: L22.1XB12.7XH5.33 (mm)/L0.87XB0.5XH0.21 (inch); Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e3; Impedance (Input): 50 OHM;
SF0250BA03189S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 249.6 MHz; Length: 9.1 mm; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Impedance (Input): 50 OHM;
SF0043BA02523T
SAW FILTER; Dimensions: L13.7XB2.15XH4.8 (mm)/L0.539XB0.085XH0.189 (inch); Impedance (Input): 1100 OHM//16.4 pF; No. of Functions: 1; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -20 Cel;
B39122-B4057-U510
TDK's B39122-B4057-U510 SAW Filter has 6 terminals, operates b/w -40°C to 85°C. With a max insertion loss of 3.5 dB at 1228 MHz, it is ideal for applications requiring a surface mount filter with a center frequency of 1228 MHz and impedance of 50 ohms.
SF0140BA01992S
SAW FILTER; Length: 13.33 mm; Terminal Finish: Matte Tin (Sn); Center/Cutoff Frequency (fo/fc): 140 MHz; No. of Functions: 1; Width (mm): 6.5;
SF0325BA02642S
SAW FILTER; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Terminal Finish: Matte Tin (Sn);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF0903BA02593S
SAW FILTER; JESD-609 Code: e3; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Terminal Finish: Matte Tin (Sn); Mounting Type: SURFACE MOUNT;
SF0915BA02501S
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; No. of Functions: 1;
SF0915BA02531S
SAW FILTER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Terminals: 4; Output Impedance (ohm): 50 OHM; Maximum Insertion Loss: 3 dB;
SF0915BA02620S
SAW FILTER; Minimum Operating Temperature: -20 Cel; Height: 1.4 mm; Impedance (Input): 50 OHM; Length: 3.8 mm; Dimensions: L3.8XB3.8XH1.4 (mm)/L0.15XB0.15XH0.055 (inch);
SF0948BA02516S
SAW FILTER; Length: 3 mm; Impedance (Input): 50 OHM; Maximum Operating Temperature: 80 Cel; No. of Functions: 1; Output Impedance (ohm): 50 OHM;
SF0948BA02589S
SAW FILTER; JESD-609 Code: e3; Attenuation At Maximum Frequency: 35 dB; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); No. of Functions: 1; Height: 1.5 mm;
SF0915BA03171S
Spectrum Control
SAW FILTER; Minimum Operating Temperature: -20 Cel; Impedance (Input): 50 OHM; Maximum Operating Temperature: 75 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 6;
Integrated Device Technology
SAW FILTER; Package Material: CERAMIC; Mounting Type: SURFACE MOUNT; Height: 1.4 mm; Maximum Operating Temperature: 65 Cel; No. of Terminals: 8;
SAW FILTER; No. of Functions: 1; No. of Terminals: 6; JESD-609 Code: e3; Length: 3.8 mm; Impedance (Input): 50 OHM;
SAW FILTER; No. of Terminals: 4; Maximum Insertion Loss: 3 dB; Length: 2.5 mm; Impedance (Input): 50 OHM; Maximum Operating Temperature: 75 Cel;
Api Technologies
SAW FILTER; Maximum Operating Temperature: 75 Cel; No. of Functions: 1; JESD-609 Code: e4; No. of Terminals: 6; Impedance (Input): 50 OHM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved